Thickness planer

JAROMA

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg Cjdpfjzr I E Ajx Aqlorf ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg Crjdpfjzh H Inox Aqljf ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7823 Technical specifications: - Roller width: 640mm - Number of knives: 4 pcs - Maximum thickness of workpiece: 250mm – Top: - Deflectors - Toothed, infeed roller - Pressure rollers - Planing roller - Smooth, outfeed roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor: 7.5kW - with brake - Electric bed lifting - 4 feed speeds: 8/11.3/16/22.4 m/min - Feed motor: 1.35kW - Dimensions (L/W/H): 1400x1200x1210mm – weight: 1041kg ADVANTAGES – Made in Poland – Electric bed lifting – Used thickness planer, very good condition Net price: 16900 PLN Net price: 4025 EUR, depending on the exchange rate of 4.20 EUR Cjdpjzp N Ndofx Aqlorf (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm Csdpfx Aezp Nzasqljrf - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8053 TECHNICAL DATA - Shaft width: 410mm - Noise-reducing comb - Number of knives: 4 pcs - Table length: 2000mm - Cast iron tables - Both tables are adjustable - Original, adjustable angled guide - Motor: 4kW - Dimensions (L/W/H): 2000x900x1300mm - Weight: 610kg ADVANTAGES - Made in Poland - Top control panel - 4-knife shaft - Used jointer - Very good condition Crjdpfoznkthox Aqljf Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: good (used), For sale is a robust, industrial-grade single-sided planer (thicknesser) of the DSMB-63 type, manufactured by the legendary Polish company – JAROMA. This machine is an absolute classic in professional woodworking. It features a massive construction that dampens all vibrations, ensuring the highest precision in processing. ⚙️ DETAILED TECHNICAL SPECIFICATIONS: Working width (cutterhead width): 630 mm. Maximum thickness of the workpiece: from 240 mm to 250 mm. Main motor power: 5.5 kW. Type of planing cutterhead: 4-knife. Cutterhead diameter: 125 mm. Cutterhead speed: 6000 rpm, resulting in a perfectly smooth surface after processing. Feed speeds: The machine has four feed speed options: 7, 10, 14, and 20 m/min. Thickness adjustment: Equipped with a convenient, electric height adjustment for the table. Lower table: Equipped with adjustable roller supports, which facilitate smooth sliding, especially with wet or heavy wood. Machine weight: Stability is guaranteed by a substantial weight of approximately 1060 kg. Crodpfx Aszp Aapeqlef 🛠️ GREATEST ADVANTAGES OF THE MACHINE: Armored, Polish quality: The heavy casting and compact construction ensure that Jaroma machines are practically maintenance-free and last for decades. High performance: A planing width of 63 cm combined with a powerful motor (5.5 kW) allows for efficient processing of heavy lumber, wide panels, and beams. Precision: The large cutterhead diameter and high speed minimize the risk of splintering or tear-out in the wood. 📍 ADDITIONAL INFORMATION: The machine is of Polish origin (Jarociński Zakład Przemysłu Maszynowego Leśnictwa). Condition: Used, in full working order. The equipment can be viewed on-site.

Condition: excellent (used), CATALOGUE NUMBER 7914 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max thickness of the workpiece 250mm – from above: - pawls/ejectors - toothed infeed roller, pulling - pressure roller - planing roller Crjdpfx Aozlpwmeqlof - pressure roller - smooth outfeed roller, pulling – from below: - adjustable rollers in the lower bed 2 pcs - motor 7.5kW - electric bed lifting - lifting motor 1.1kW - 2 types of feed speed - feed motor 1.3kW - dimensions L/W/H 1130x1300x1200mm - weight 1026kg ADVANTAGES – manufactured by the Polish brand JAROMA – electric bed lifting – DTR documentation – used thicknesser, very good condition Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7835 TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb Cedpfxszkrvcj Aqlsrf - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), CATALOG NUMBER 7573 Technical data: - Shaft width: 640 mm - Number of knives: 4 pcs - Max thickness of machined element: 270 mm - Top section: - Safety pawls - Toothed infeed shaft, driven - Hold-downs - Planing shaft - Hold-downs - Outfeed smooth shaft, driven - Bottom section: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5 kW - Electric table lifting – lifting motor: 0.75 kW - 2 feed speeds – feed motor: 1.1 kW Cedpfx Aezkg Utjqlorf - Suction outlet diameter: 160 mm - Dimensions (L/W/H): 1150x1240x1170 mm - Weight: 1073 kg ADVANTAGES: – Polish manufacture – Electric table height adjustment – Operating documentation (DTR) – Used thickness planer, in very good condition Net price: 26,900 PLN Net price: 6,400 EUR (depending on 4.2 EUR rate) (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs - Max. thickness of the workpiece: 250mm From above: - Pawls - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs Crodpfxezkg Tcs Aqlsf - Motor: 7.5kW - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to larger fluctuations)