Used thickness planer for sale (207)

Condition: like new (used), Year of construction: 2004, I sell the industrial thicknessing machine LEDINEK ROTOLES 400 D. Machine year 2004. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. construction cutting take-out 8mm Cjdpfx Aowlkmxeatohd Rotation Spindle head 34-knives Variable feeding speed 10-30 m/min. Working thickness motirical adjustable with digital readout. Dust extraction hose diameter 200mm (30m/sec. required). Main spindle motor 15,0KW. Feed motor 3,0 KW. Total power 18 KW. Total weight 1800kg. European product, made in EU, with CE certificate and instruction manuals. Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Olma precision thickness planer, 630 mm, 4-knife cutterhead, electric thickness table adjustment. Chsdpoz Hzv Iefx Aatsd

Condition: excellent (used), CATALOGUE NUMBER: 7915 TECHNICAL SPECIFICATIONS: Csdozrltqspfx Aatohd Shaft width: 640mm Number of knives: 4 pcs Maximum thickness of the workpiece: 200mm – Top: Latches/deflectors Toothed infeed roller, pulling Pressure roller Planing roller Pressure roller Smooth outfeed roller, pulling – Bottom: Adjustable rollers in the lower bed: 2 pcs Motor: 7kW Infinitely variable feed speed control Dimensions (L/W/H): 1800x1250x1150mm Weight: 1250kg ADVANTAGES: – Bulgarian production – Infinitely variable feed speed control – Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: good (used), Year of construction: 1996, functionality: fully functional, planing width: 630 mm, overall weight: 1,000 kg, planing height: 230 mm, Kölle thickness planer DH63 with V-bar knife shaft, 4 knives, Electric table height adjustment with fine adjustment via handwheel, planing height 230mm, Cedpfx Aovluwpoatehd 3 feed speeds 4, 6, 12m/min, steel feed roller and rubber feed roller, motor brake, Machine with soundproof hood/low noise. The machine is in very good condition considering its age, ready for immediate use.

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives Chjdpfxsyt Nx Us Aated - Central lubrication - Star-delta switch

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Chjdpfxoz N Hfbs Aatod Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance 520 mm working capacity 2015 CE

Condition: excellent (used), functionality: fully functional, planing width: 500 mm, number of blades: 4, total width: 1,700 mm, total height: 1,800 mm, overall weight: 2,000 kg, total length: 2,200 mm, chip removal: 160 mm, extraction connection diameter: 160 mm, height adjustment type: electric, number of feed rollers: 3, number of planer blades: 3, pass-through height: 200 mm, planing height: 200 mm, table width: 500 mm, working height: 200 mm, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Cedpfx Aaswfihuotohd Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: good (used), Griggio PSA 530 - Planing width: 53 cm - Electric table lifting - 4 Tersa knives - 4 feed speeds on the gearbox Chodpfszv T Azox Aatjd The machine is in very good condition and operates smoothly and quietly.

Condition: used, Technical specifications: Cjdpfx Aszvmlpeatehd Max. planing width: 520 mm Max. planing height: 300 mm Cutterhead diameter: 110 mm Number of knives: 4 pcs Feed rate: 5/8/12/19 m/min Electric lifting Dust extraction port: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height: 1280 mm

Condition: used, Year of construction: 1992, working width: 520 mm working height: 250 mm cutter head: strip-knive number of blades: 4 height adjustment: electrically read out workpiece thickness: scale feed speed: 2 speeds infeed roller: steel outfeed roller: steel table roller: yes motor power: 5,5 kW suction connection: 140mm machine length: 1200 mm machine width: 1400 mm Cedpfx Aeyt E Raeatshd weight: ca. 900kg

Condition: excellent (used), CATALOGUE NUMBER 7573 Technical specifications: - shaft width 640mm - number of knives 4 pcs - max. thickness of workpiece 270mm - from above: - pawls - toothed infeed shaft, pull-type - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pull-type - from below: - adjustable rollers in the lower table, 2 pcs - motor 7.5kW - electric table lifting - lifting motor 0.75kW - 2 types of feed speed - feed motor 1.1kW - diameter of dust extraction port 160mm - dimensions L/W/H 1150x1240x1170mm - weight 1073kg ADVANTAGES - Polish production - electric table lifting - DTR documentation - used thicknesser, very good condition Cedpfx Asztw I Njatjhd Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, power: 4.85 kW (6.59 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, The Casadei/SCM PS41ES planer is designed with the features that characterize Casadei/SCM machines: robustness, operational reliability, and user-friendliness. The machine's compact design makes it ideal for customers with limited space. The planing table is very stable, with a 4-column support system that ensures maximum precision. This machine is brand new and is being sold at a significantly reduced price. Specifications: * Planing width: 410mm * Planing height: 240mm * Motor: 6.6hp * "Xylent" SCM spiral cutter * Rubber-coated feed roller * Feed rate: 6-12m/min Cjde Agfxcopfx Aatohd * Built-in indicator dial on the planer handwheel List price: SEK 82,500 + VAT A professional machine that requires little space. Operates on 16 amp, 400V, 3-phase power.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 60.04.102.21, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 40 A, input frequency: 50 Hz, type of input current: AC, planing width: 630 mm, actuation type: electric, total length of planing tables: 2,250 mm, total width: 1,200 mm, total height: 1,200 mm, overall weight: 1,100 kg, Equipment: CE marking, documentation/manual, Thickness planer Exact 63 with: four-spindle lift table, feed roller, outfeed table, steplessly adjustable feed, Silent Power planer shaft with HM reversible knives, max. pass-through height 300 mm, max. pass-through width 630 mm. Max. material removal per pass: 10 mm. Estimated operating hours: 200. Single ownership. Chjdoym Sfqopfx Aated

Condition: ready for operation (used), Year of construction: 1999, SCM S630 Thickness Planer Max. planing width: 630 mm, Max. planing height: 300 mm, 4 cutterblocks electric height adjustment, infinitely variable feed speed, electronic height display with digital readout 2 rubber feed rollers 5.5 kW motor with brake CE compliant Price: 5500.- Chedpfx Aaszlwxfsted

Condition: used, Technical specifications: Chedpfozilrbjx Aated Max. planing width: 520 mm Max. planing height: 300 mm Cutter head speed: 5000 rpm Number of knives: 4 Number of rollers in the table: 1 Feed rate: continuously adjustable Electric lifting mechanism Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 1240 mm Width: 1090 mm Height: 1210 mm

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Cjdpfoz A Hhuox Aatehd

Condition: like new (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,000 mm, total width: 650 mm, overall weight: 790 kg, Equipment: CE marking, The CASADEI R63 H3 is a professional thickness planer designed for the precise machining of solid wood components. Its robust and heavy-duty construction ensures stable operation, even under intensive use in woodworking and production facilities. The machine is equipped with a planing shaft with a working width of 630 mm and smooth feed speed adjustment in the range of 5–25 m/min. Technical specifications: Cjdpfxszxxgqj Aatohd - Manufacturer: CASADEI - Model: R63 H3 - Year of manufacture: 1999 - Maximum planing width: 630 mm - Maximum planing height: 300 mm - Minimum planing height: 4 mm - Maximum material removal: 8 mm - Minimum workpiece length: 250 mm - Work table length: 1000 mm - Planing shaft diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630 × 35 × 3 mm - Shaft speed: approximately 4500 rpm - Adjustable feed speed: 5–25 m/min - Feed roller diameter: 85 mm - Power according to nameplate: 10 kW - Power supply: three-phase - Current draw: 18 A - Weight according to nameplate: 790 kg Key advantages: - Large working width – 630 mm - Four-knife planing shaft - Smoothly adjustable feed - Maximum workpiece height up to 300 mm - Massive and stable construction - Reputable Italian manufacturer - Machine designed for professional use This machine is ideal for use in a woodworking shop, sawmill, or company involved in the production of furniture and wood components. Condition: used, with normal signs of wear commensurate with its age. Inspection possible on-site. On-site testing of the machine is possible. Financing options are available through leasing or installment plans. The machine has been technically inspected and is ready for further use. It is possible to start and test the machine on-site, allowing you to assess its condition and performance parameters before purchase. For customer convenience, we offer financing options in the form of leasing or installments. We assist with the formalities and help you choose the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm Chjdpfxezxhdfj Aatsd - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Planing width: 40 cm Csdpfxoy Nlp Aj Aatehd 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Maximum planing height: 170 mm Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: used, Year of construction: 1997, functionality: fully functional, Ledinek Planer Superles 400-4V+4F Working width max: 450mm Jointer cutterhead: 30kw Thicknessing cutterhead: 37kw Vertical cutterhead left: 15kw Vertical cutterhead right: 15kw Chamfering: 4x1.5kw Feed: 15kw Feed drive motor: 1.5kw Chsdj Af Apyjpfx Aatod Feed speed: 8-40m/min

Condition: excellent (used), CATALOGUE NUMBER 7172 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 230mm - 4-knife roller from top: - pawls - toothed feed roller, pull type - pressure roller - planing roller - pressure roller - smooth feed roller, pull type, metal - 2 adjustable sliding rollers at the bottom, mounted on the table - 5.5kW motor - electric table lifting, approx. 0.25kW - 2 feed speed types, 0.75kW - diameter of extraction nozzle 160mm - dimensions (L/W/H) 1320x1270x1380mm - weight 903kg ADVANTAGES - made in Germany - used thickness planer, very good condition Net price: 21900 PLN Chjdpfx Aasztxmyotod Net price: 5093 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), TECHNICAL DATA - Shaft width 500mm - Number of knives: 4 - Maximum thickness of the workpiece: 230mm From above: - Ratchets - Toothed, pulling, sequential feed shaft - Pressure rollers - Planing shaft - Pressure roller - Smooth, pulling discharge shaft From below: - Adjustable pulling rollers in the lower bed, 2 pcs Chedpfsztzi Djx Aatod - Motor: 5.5kW - Electric bed lifting - Bed lifting motor: 0.37kW - Smooth feed rate adjustment - Diameter of dust extraction nozzle: 150mm - Dimensions (L/W/H): 1000x1000x1350mm - Weight: 690kg ADVANTAGES - Electric bed lifting - 4-knife shaft - Pulling rollers in the lower bed - Used thickness planer, very good condition Net price: 16,900 PLN Net price: 3,930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Second-hand PANHANS Type 436 thickness planer for professional use in woodworking. Chjdpezrx D Nofx Aatsd Technical data: - Working width: 630 mm - Blade: Tersa Z4 - Planing height: 300 mm - Weight: 700 kg

Condition: excellent (used), Catalog number: 6815 TECHNICAL DATA - shaft width 640mm - number of knives: 4 pcs - max thickness of workpiece: 230mm Top: - toothed infeed shaft, pulling, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pulling Bottom: - roller + infeed table - adjustable roller in the lower table - outfeed table + roller - motor 5.5kW - stepless feed speed adjustment - feed motor 0.5kW - diameter of dust extraction nozzle: 150mm - dimensions L/W/H: 1630x1630x1140mm - weight 920kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Codpoztxbdofx Aatohd Net price: 17,900 PLN Net price: 4,163 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number 7303 TECHNICAL DATA - Shaft width 640mm - Number of knives 3 pcs - Max thickness of the workpiece 250mm From above: - Pawls - Toothed infeed shaft, pulling type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pulling type From below: - Adjustable rollers in the lower bed, 2 pcs - Motor 7.5kW - Electric bed lifting - Lifting motor 0.75kW - 4 feed speed types - Feed motor 1.5kW - Diameter of the dust extraction nozzle 140mm - Dimensions L/W/H 1120x1250x1680mm - Weight 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to larger fluctuations) Codpfx Aszxg S Ujatshd