Powder equipment

GEMA

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h Bodpfx Aj Af I Hdjknjww - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector Bodpfx Ajyxl Epskneww -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: used, Year of construction: 1976, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 800 mm turning length: plan =140 / quer =120 mm center height over bed: 170 mm spindle bore of work spindle: Ø 40 mm range of revolution per miute: 25 - 2000 / 20 step U/min feeds:: längs: 0,028 - 1,0 / quer: 0,012 - 0,44 mm tailstock quill taper MT: MK3 tailstock quill adjustment:: 120 mm total power requirement: 3,0 kW weight of the machine ca.: 1,1 t dimension machine xH: 2,0 x 0,8 x 1,4 m Threading possible: Metric, Withwort and modular thread Equipment: - 2-way measuring device VISUCONT - 3-jaw chuck Ø 205mm with internal clamping jaws - quick-change steel holder Multifix - foot brake - cooling water pump (exclusive supply) * Bwodpova Ertofx Aknjw

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 325 mm turning diameter over support: 150 mm turning length: 1000 mm turning length: plan: 165 / quer: 160 mm Bjdpsu Ixydefx Aknjww center height over bed: 200 mm length of gap: keine Kröpfung mm range of revolution per miute: 48 - 1.500 / 10 step U/min spindle bore of work spindle: 40 mm feeds:: längs: 0,021...2,34 / quer: 0,09...1,6 mm tailstock quill taper MT: 4 tailstock quill adjustment:: 125 mm total power requirement: 2,2 kW weight of the machine ca.: 1,0 t dimension machine xH: 2,1 x 0,7 x 1,2 m Threading possible: Metric, Withwort and modular thread Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change steel holder - Foot brake - Cooling water pump (exclusive feed) *

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL R185 EC-KF Rcc4 Set Blasting: RT 250 euro RSKI 1000 RSKI700-3d-atex AM: C1 M1 Bwsdowfdbcopfx Aknjw M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, drum and blasting technology.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system Bsdpoz Rnu Tofx Aknoww _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robust and, thanks to the generous manual coating opening, is ideal for manual operation (hand coating). Technical data & connection values: Bodpjz N Aivsfx Akneww • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For powder coating: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is extracted downwards. The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be reprocessed and reused in the cycle (enormous material savings!). • Cleaning unit: Unit mounted on top including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire extinguishing system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, NRW) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). "We offer you a suitable bank financing option for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Bedpfx Ajtk Rwteknsww

Condition: used, Powder coating booth with multi-cyclone and after-filter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with after-filter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and after-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth substructure with inlet, manual coating opening, and spray gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / After-filter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power after-filter: 15 kW with 12 filter plates (air volume flow: 8000 m³/h) 22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Bsdjz Nyqwepfx Akneww Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: 7,500,- € net (plus VAT). "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Bwjdjz Iz Efopfx Aknsw Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Bwjdpsvr Tbaofx Aknow Total installed power : ~12 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Condition: used, Year of construction: 1981, GEMA LZ 170 Lead Screw and Feed Screw Lathe Lead Screw and Feed Screw Lathe GEMA Type / Model: LZ 170 Condition: Used Year of Manufacture: 1981 Technical Data Center Height 180 mm Diameter over Slide 230 mm Distance Between Centers 1000 mm Spindle Bore 40 mm Bed Width 240 mm Spindle Speed, 20 Steps 25 - 2000 rpm Motor Power 3.2 / 4 kW Tailstock Arbor MK 3 Quill Travel 120 mm Bwsdpszvfaljfx Aknew Weight approx. 950 kg Dimensions (L x W x H) approx. 2200 mm x 800 mm x 1300 mm Equipment: - 3-jaw chuck Röhm, Ø 160 mm - Quick-change tool holder System Multifix Size B, without inserts - Chuck guard with limit switch - Machine light - Coolant system - Machine feet Inquiry item! Transportation costs will be quoted separately.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Bsdpszqur Hjfx Aknoww Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: new, TECHNICAL DATA Bjdpfjfbgz Ijx Aknjww Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. Bwsdpfew Ek Ntex Aknew The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!