Used straightening and bending machines for sale (88)

Year of construction: 1960, condition: used, R.A.S. Rotary Turning Press Type 200-20 Machine No. 117/6 Nsdpfx Adoic Rn Uo Selc Stroke 200 mm Pressing force 20 t Spindle diameter 60 mm

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Nledoxcux Rjpfx Ad Sec Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: excellent (used), Hydraulic straightening press Brand: S.A.R.L. Constructeur Capacity: 90 t Maximum installation height: 1000 mm Stroke: 450 mm Njdpfoywh Dfex Ad Solc Table diameter: 600 mm Internal width: 1000 mm 380 Volt Year of manufacture: 2007 Transport dimensions: Length: 1600 mm Width: 650 mm Height: 2430 mm Weight: 900 kg

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg Nljdpfx Aevgcpcjd Sec

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec total power requirement 3 kW weight 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 ° Nledpfxjyv I Tdj Ad Ssc    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm Nlodpfx Adsxcuyhj Sec 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Nodjtia Hhjpfx Ad Sjlc

Condition: used, input voltage: 400 V, C-profile press for industrial company. Make: Unknown Model: Unknown Nljdjyzb Uropfx Ad Sjc Weight: around 4000 kg Capacity: approximately 300 t

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors Nedsr Etuljpfx Ad Solc - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible. Nodpfxjxldiqe Ad Sjlc

Condition: new, neu ca. 4 Monate ab Auftragse Italien 190000 € 3591 € 300 to 500 mm 5.000 x 3.050 mm 700 mm 20 mm/s 2 mm/s 4000 mm 5000 mm 2600 mm 18000 kg horizontal verschiebbar 3050 mm 2.200 mm 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Nljdpfeynnc Uex Ad Soc Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 80000 € 1512 € 200 to 500 mm 2.000 x 1.550 mm 800 mm 20 mm/s 2 mm/s 2400 mm 2000 mm 2600 mm 4800 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand Nledpoynmv Hsfx Ad Soc control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 92000 € Nlsdpfx Adeynmvys Soc 1738.8 € 200 to 500 mm 2.500 x 2.050 mm 800 mm 20 mm/s 2 mm/s 2950 mm 2500 mm 2600 mm 6500 kg horizontal verschiebbar 2050 mm 1450 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 107000 € 2022.3 € 200 to 500 mm 3.000 x 2.550 mm 800 mm 20 mm/s 2 mm/s 3550 mm 3000 mm 2600 mm 8500 kg horizontal verschiebbar 2550 mm 1900 mm 2000 mm horizontal movable cylinder Nlodpfx Asynmvgsd Ssc hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 135000 € 2551.5 € 300 to 500 mm 3.000 x 2.050 mm Nledpfx Adoynmvas Soc 700 mm 20 mm/s 2 mm/s 3100 mm 3000 mm 2600 mm 11500 kg horizontal verschiebbar 2050 mm 1300 mm 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 160000 € 3024 € 300 to Nedjynmu Nspfx Ad Selc 500 mm 4.000 x 2.550 mm 700 mm 20 mm/s 2 mm/s 3550 mm 4000 mm 2600 mm 15000 kg horizontal verschiebbar 2550 mm 1.800 mm 2.800 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 218000 € 400 to 500 mm 4.000 x 2.550 mm 700 mm 20 mm/s 2 mm/s 4000 mm 4000 mm 2600 mm 20500 kg horizontal verschiebbar 2550 mm 1.800 mm 2.900 mm horizontal movable cylinder Nlodpfx Adoynmu Ae Sjc hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 258000 € 400 to 500 mm 5.000 x 3.050 mm 700 mm 20 mm/s 2 mm/s 4500 mm 5000 mm 2600 mm 24000 kg horizontal verschiebbar 3050 mm 2.200 mm 3.600 mm Njdsynmuvspfx Ad Selc Horizontal verschiebbarer Zylinder2.200 mm Hydraulisch beweglicher Ständer: 3.600 mm Bedienung über Handhebel sowie Bedienpanel Tisch mit integriertem Zylinder zum anheben des Werkstücks Ausrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH (Symbolfoto)

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 500 to 500 mm 5.000 x 2.550 mm 700 mm 18 mm/s 3 mm/s 5000 mm 5000 mm 3000 mm 32000 kg horizontal verschiebbar 2550 mm 1.700 mm 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) Nlodpfsynmupsx Ad Sec No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 600 to 500 mm 6.000 x 2.550 mm 700 mm 18 mm/s 3 mm/s 5000 mm 6000 mm 3000 mm 43000 kg horizontal verschiebbar Nlodeynmucspfx Ad Soc 2550 mm 2200 mm 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 75000 € 1417.5 € Njdpeynmp Tofx Ad Sslc 150 to 500 mm 2.500 x 2.050 mm 800 mm 20 mm/s 3 mm/s 2900 mm 2500 mm 2500 mm 5200 kg horizontal verschiebbar 2050 mm 1400 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm Nodoymf Nvopfx Ad Sjlc The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories Nlodpfx Asymf Iled Soc - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: used, Year of construction: 1981, Technical details: Nljdpfxsyk Utls Ad Ssc pressure: 40 t

Year of construction: 2023, condition: new, DPM 1070 x 150ton Hydraulic Garage Press Cap: 100ton Many other sizes and capacities available. • Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ) • Adjustable table height • Table up-down movement attachment Nedpfjgyta Hsx Ad Solc • Control with special joystick • Right- Left moving piston by hand (DK) • Built According to EC Safety Directives and has CE • User’s manual