Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 completely checked + serviced including new feed belt Equipment and technical data: Incl. combination unit with contact roller and sanding shoe with height-adjustable contact roller for calibration with air cushion pressure shoe controlled by the workpiece 4-way adjustable grain compensation with pneumatic belt tensioning device with a rotating cleaning brush on the outlet side of the machine Grinding width: 1350 mm Grinding belt length: 1900 mm Passage height: 150 mm Main motor: 15 kW Feed speed continuously adjustable 2.5 - 12.5 m/min. with roller table at the inlet with digital display device for the electrically driven workpiece thickness adjustment Extraction nozzle 2 x 200 mm Space requirement approx. 2300 x 2000 x 2300 mm Celitudjt H Tulogsrb Weight approx.: 2300 kg Pictures show the machine in a condition that has not yet been overhauled! Location: Flörsheim Availability: approx. 6-8 weeks after placing the order

Condition: used, Year of construction: 2020, Sanding width: 1.350 mm Workpiece thickness min: 3 mm Passage height max: 200 mm Sanding aggregates total: 3 Cross-belts: 1 Sanding rollers: 1 Hardness grade of roller in ° shore: 90 Sanding pads total: 1 Segmental pressure pad: electronic Lacquer sanding: Yes Vacuum table: Yes Constant passline height: Yes Sensing of workpiece thickness: Yes Main motor power: 22 kW Sanding belt length: 2.620 mm Adjustable sanding belt speed: continuously variable Feedrate max: 16 m/min Continuously variable feed: Yes Jump-in control: electropneumatically Configuration of aggregates: s-r-p-u Chevron belt unit: longitudinal Side of belt change: Left Jump-in control: Yes VIET Save Corner: Yes Control: VIET IPC CONTROL 15'' TS Celitewb Drasudgerb Conformity marking: CE mark, EAC mark Weight: 5.500 kg Space requirement Length: 3,2 m Space requirement Width: 2,2 m Space requirement Height: 2,7 m

Condition: excellent (used), Year of construction: 1997, MAKA long belt sander Creliewdnwxjtudgsb Very good condition - motorized lifting of the table top - table width 80cm - table length 250cm + clearance - 380V power supply - Italian production - two speeds of rotation right/left - possibility of presenting the machine Price 1890 euros Price 7990 PLN I invite everyone to contact me.

Condition: good (used), Code: 0753 Brand: FMB Model: B/3 Automatic edge sander for straight, round and shaped edges and profiles, both unfinished and painted Technical data: Working height mm 100 adjustable by handwheel Min working length mm 120 Min working width mm 30 Track feed speed variator 1° oscillating sanding unit - Motor with adjustable speed Crolitsrf T S Ioudgsb Lower bevel sanding unit - Motor with adjustable speed Upper bevel sanding unit - Motor with adjustable speed Removable panel support Overall dimensions: mm 3400 x 1300 x 1500 h Weight kg 1900

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, VERY WELL MAINTAINED MULTI-PURPOSE SURFACE SANDING MACHINE WITH CROSS AND LENGTHWISE BELT; SUITABLE FOR WOOD CALIBRATION SANDING; WOOD SURFACE SANDING AND INTERMEDIATE LACQUER SANDING. Working width max. 1,300 mm Conveyor belt with vacuum device Transport blasting device with pressure regulator Feed motor 1.5 KW Feed rate 3 - 15 m/min CSD - Computer controlled selective pressure regulation technology with 2 mm tolerance compensation Spacing of the control rollers 16 mm, pressure shoe pitch 48 mm, switch distance 82 mm Crslitujumtg Iedgsb Unit equipment: 1) Cross sanding unit Belt dimensions with lamellar intermediate belt Sanding belt dimensions 15 x 4,800 mm Sanding belt speed infinitely variable can therefore be used for surface and lacquer sanding 2) Longitudinal sanding unit with sanding drum and sanding pad combined, therefore suitable for calibration sanding as well as for wood and veneer surface sanding Infinitely variable sanding belt speed, therefore also suitable for can also be used for lacquer sanding Sanding belt dimensions: 1,350 x 2,620 mm Control system: Machine control unit on the right-hand machine control unit 20 programs can be stored Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 tons

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Crolituecr S Ecodgeb Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Coljt Na Anjitudgsrb Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: good (used), Code: 0087 Brand: LEVIGALTECNICA Model: 1300 SRN Automatic 1-belt wide belt sander for furniture, custom-made furniture, panels, wooden frames, doors and various Technical data: Working width mm 1300 Working height min/max mm 3-175 Calibrating/Sanding rubber roller diameter mm 250 Crjlitudjwbhmujgob Motor Hp 25 Brackets holding small parts Belt size mm 1900 x 1330 Automatic table positioner Electronic positioning display Belt feed at 2 speeds 2 infeed support rollers 2 outfeed support rollers Overall dimensions mm 2100 x 1600 x 1950 h Weight kg 2300

Year of construction: 1988, Condition: used, machine/vehicle number: 01910/88, Floor grinding machine Eugen Laegler Type: Vibrafor Engine power: 1,1 KW Volt: 220 Grinding surface vibrating Dust bag Crjlijcb Au Sjtudgeb Location: 54634 Bitburg - can be visited

Condition: used, Year of construction: 2001, Used machine Year of manufacture 2001 Grinding width 1100 mm Grinding belt length 1900 mm Workpiece thickness 3-150 mm Infinitely variable feed speeds 2.5-13 m/min. 1 steel contact roller 1 rubber-coated contact roller 1 sanding pad unit with air cushion sanding pad Drives: 1st sanding unit 15 kW 2nd sanding unit 15 kW 3rd sanding unit 11 kW with table extension at the inlet with table extension at the outlet Total connected load 43 kW Weight 3100 kg Crolewb Egxjitudgjb Extraction capacity approx. 6750 m³/h Air speed 20 m/s Compressed air connection 6-8 bar Air consumption approx. 30 l/min. L x W x H 1750 x 2740 x 1890 mm

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Crjlitjvk R Arjudgjb Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: In intermediate paint sanding (Cd-L) version Robust, space-saving single-wide belt sander for demanding pre- and finish sanding • Constant working height thanks to upper section adjustment • Working width 1350 mm • Top sanding with combination unit • Entire sanding unit can be tilted up to 10° • Grooved rubber contact roller of proven hardness • Contact roller level continuously adjustable according to an abrasive grit scale • Pneumatic raising/lowering of the contact roller according to the unit selection • Sanding pad with quickly replaceable sliding surface • Parallel spring-loaded, ground steel pressure roller at the inlet • Rubberized pressure roller at the outlet • Belt drive motor 11 kW (1100 mm) 15 kW (1350 mm), 18.5 kW (1600 mm) 400 V/50 Hz; with soft start for low power consumption during start-up • Motorized, finely adjustable height adjustment with digital display • Pneumatic belt tension, control, and oscillation, compressed air consumption approx. 2 l/min. • Optimum safety thanks to an automatic immediate stop with disc brake in the event of belt breakage, belt unwinding, pressure drop, or when the belt inlet door is opened • 1.1 or 1.5 kW workpiece feed with fabric-reinforced rubber conveyor carpet • Vacuum device for work table with small parts area, fan integrated into the machine frame • Entire electrical system with contactor control; Automatic star-delta start of the main motor, motor protection, and ammeter for monitoring chip removal. • 200 mm throughput height • 1350 x 2000 mm sanding belt Automatic thickness adjustment across the entire working width • Workpiece over-thickness protection with immediate feed stop and automatic lifting of the machine head • Continuous chip removal adjustment • Electronic feed control on the control panel, continuously variable from 3 - 15 m/min. Crolskwhxisitudgob • PLC control/programming with touchscreen (color) and TEACH-IN storage (at the push of a button according to the sanding result, i.e., no typing required) • Pneumatic carpet control • Workpiece support tables at the inlet and outlet • ENORMATIC: Fully automated quick adjustment and feed triggering (very useful, for example, for large workpieces) • eco* energy-saving mode • Error diagnostics • Job and operating hour counter - Electronic segmented sanding pad, segment width 22 mm (swivel-mounted special version) - Continuously adjustable sanding belt speed (with program storage) - Blasting nozzles for sanding belt cleaning, operation-controlled, additional extraction nozzle - Additional sanding pad insert for paint sanding Incl. complete air blade Swiveling Including freight, unloading on site Including commissioning and training Location: Solingen Availability: Short-term

Condition: new, Year of construction: 2025, For machining smaller parts, especially solid wood Simple and safe operation Combined sanding unit with sanding shoe for calibrating solid wood Control panel on the front side Standard with ribbed steel roller Ø 120 mm and hard sanding shoe with graphite coating on exchangeable insert Motorized height adjustment of the working table Electronically controlled sanding belt oscillation Manual star/delta start of the motor Mechanical measurement of the table position Ammeter for displaying the current consumption of the grinding unit Two feed belt speeds Electromagnetic brake Celjcnw U Rsitudgerb Combination unit for calibrating and grinding Ribbed steel roller Ø 120 mm with height fine adjustment Hard grinding shoe with graphite pad Universal version for calibrating and sanding of solid wood Model BBS 630 C Article-No. 5343065 Technical data working width 630 mm diameter of the working roller 120 mm sanding belt width 650 mm Sanding belt length 1600 mm Speed of the sanding belt 18 m/s Min./max. workpiece height 3/160 mm Feed speed 4,5 / 9 m/min. Motor power 5 kW / 400 V Gear feed motor 0,43 Height adjustment motor 0,18 kW Compressed air consumption 20 l/min. Operating pressure 5,5 bar Operating pressure belt blower 8 bar Suction pipe diameter 150 mm Suction capacity 3.000 m³/h Dimensions mm 600 x 1010 x 1500 mm Weight 770 kg Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 MACHINE SEEKER ENQUIRIES: Crelieuhiq Djtudgsb Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: •Robust, space-saving dual-belt grinder for demanding pre- and finish-grinding •Constant working height thanks to upper section adjustment •Working width 1350 mm •Top-loading grinding, with 2 grinding units •1. Unit with grooved rubber contact roller of proven hardness •Pneumatic (programmable) adjustable contact roller, contact roller level continuously adjustable according to an abrasive grit scale •Second unit with electronically controlled, segmented sanding pad, segment width 35 mm, and quickly replaceable sliding lining •Parallel spring-loaded, ground steel pressure roller at the inlet •Rubber-coated pressure rollers between the sanding units and at the outlet •Motor 15 kW (20 HP), 400 V/50 Hz with soft start for low power consumption during start-up •Motor-driven, finely adjustable height adjustment with numeric display •Belt tension, control, and oscillation are pneumatic, compressed air consumption approx. 4 l/min. Optimum safety thanks to automatic immediate stop with disc brake in the event of a belt break. •Workpiece feed 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt. •Complete electrical system with contactor control; automatic star-delta start of the main motor, motor protection, and ammeter for monitoring chip removal. •Passage height 200 mm •Sanding belt size 1350 x 2000 mm Comfort features: •Automatic thickness adjustment across the entire working width. •Workpiece over-thickness protection with immediate feed stop and automatic lifting of the machine head. •Stepless chip removal adjustment. •Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min. PLC control/programming with color touchscreen and TEACH-IN storage (at the touch of a button based on the grinding result, i.e., no typing required) Pneumatic carpet control Workpiece support with roller at the infeed and outfeed Enormatic: Fully automated quick adjustment and feed solution eco* energy-saving mode Fault diagnostics Job and operating hour counter Machine in E-Plus version (RE) Including 1350 cm outfeed table extension, foldable, without insert plate Including freight, unloading on site Including commissioning and training Location: Hochheim Availability: Approx. week 51/2023

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. Colitudsd R Ev Dogsrb The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Cjlitsv Aqx Djudgorb Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Location: Solingen

Condition: good (used), Year of construction: 1996, Griggio universal edge sanding machine with oscillating sanding belt Type: GL 150 Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Inclinable Motor power: 1.8 kW Suction nozzle Table size: 1440 x 220 mm Colitudet U Rvvegsrb Belt length: 2200 x 150 mm Weight: 530 kg Sanding sleeve device Feed 3 rollers CE marking Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Celitujff Hdfsdgorb Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: new, Year of construction: 2024, The Uniq series is the full-fledged basis of our range and shares all the features that have helped the Kündig edge sanding machine gain its reputation on the market as a robust, versatile precision instrument. Part of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90mm and the possibility of motorized tilting by up to 45°. All the usual edge processing operations can be carried out at the up to four grinding stations. Edge sanding machine Kündig Uniq front and rear side Colijfig Rwetudgsrb Ingenious design - the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a whole range of intelligent functions and features. For example, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation travel, sanding belts can be used optimally over their entire width, without the need for laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The sanding unit can also be tilted conveniently by means of a rotary switch and also with the aid of a separate motor. The unit can be tilted between 90° and 45°. Thanks to the sophisticated swivel mechanism

Condition: new, Year of construction: 2025, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink Cjlitudsr Hr Dzjgerb W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Crolitudelht H Nsgsb Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Crolieff Hdbotudgjb Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: new, Year of construction: 2024, Edge sanding machine with overhead feed unit What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. Cjlitudshqb Rcjgerb The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side 2nd sanding station: "solid wood side 3rd sanding station: "Additional table 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Cjlogf Sw Neitudgorb Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: good (used), Year of construction: 1995, Maka universal edge sanding machine with oscillating sanding belt Type: KSM 150/2 Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Can be tilted up to: 45 - 0 + 45° degrees Coljr Igtreitudgsrb Motor power: 2.0 kW Suction nozzle Table size: 1440 x 220 mm Weight: 530 kg Sanding sleeve device CE marking Location: ex stock 54634 Bitburg - immediately available -