Condition: as good as new (ex-display), Demonstration machine: Rubber-covered working roller 90 Sh, motorized table lift, Automatic switching - star/delta, ammeter for current measurement, sanding belt oscillation, mechanically adjustable sanding shoe, electronic measurement of the table position with digital display, rubber-covered pressure roller Noise-insulated and CE tested! Technical data: Sanding belt length 1900 mm Carpet speed 4.5/9 m/min Dslinevrvwkj Uikjkl Motor output power S1 7.5 kW Sanding width 950 mm Diameter of the sanding roller 120 mm Hardness of the sanding roller 90 Sh Length without table extensions 1430 mm Width 1510 mm Height without suction nozzle 1800 mm Height with suction nozzle 2130 mm Special equipment: Pneumatic sanding shoe with automatic use Table carpet centering

Condition: excellent (used), Year of construction: 1979, Edge sanding machine Year of construction 1978 Dkolievkd D Asn Uiksl Sanding belt 2200 mm Sturdy design

Year of construction: 1999, Condition: excellent (used), WIDE BAND SANDMACHINE, 2 AGGENATES, CONTACT SHAFT AND SHAFT WITH COIL, SANDMACHINE Bottom drive shaft motor 15 kW, motor with coil 7.5 kW, smooth feed regulation Dkjlogrdx Usin Uikjl

Condition: good (used), Year of construction: 1991, operating hours: 678 h, Functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 2,000 kg, grinding height: 150 mm, power: 17 kW (23.11 HP), grinding belt length: 1,900 mm, frequency: 50 Hz, workpiece width (max.): 1,100 mm, Sandingmaster KCSB-1100 Dkelin Uovqbc Njikel 1-belt combo with electro-pneumatic sanding shoe for insertion and removal - Cleaning brush - Automatic carpet centering - Digital display - Electric Sandomatic - Belt dimensions 1130 x 1900 mm - Working width 1100 mm - Electric height adjustment 3- 150 mm - Max. workpiece height 150 mm - Feed speed m/min 7 + 14 - Motor power 15 kW - Total connection approx. 17 kW - Net weight 2000 kg - Condition: Full functionality tested by us

Condition: excellent (used), Belt sander - a highly efficient machine for processing furniture boards, wood, plastics and metal. - Ideal for pre- and final preparation. - It has unlimited possibilities of paper gradation adjustment - Sliding belt table and its adjustment make it possible to grind material up to 100 mm thick. - The machine is equipped with a dust extraction system from the inside after connecting with pipes fi 100 mm to industrial vacuum cleaners, dust extractors, etc. Dkelin Uomrqlnjikjl - The machine does a great job as a rough pick-up machine for the top layer of material. -Belt table conveys material under 2 sanding belts. - Adjustment of the thickness of the material is done by adjusting the table and is carried out through a panel with a digital display. - The rotations of the tape drive shafts are smoothly regulated by potentiometers through inverters, which gives extremely precise control of each shaft. - The working width is 1300 mm.

Condition: excellent (used), Tecnolegno T16 edge grinder 1 sanding unit Dkolin Usviry Neikjl Self-sharpening grinding unit Manual adjustment of the sanding unit Manual adjustment of the aggregate angle Sanding unit with oscillation Two speed grinding belt Feed speed adjustable by variator

Condition: new, Year of construction: 2023, machine/vehicle number: 3487, Holzkraft edge sanding machine KSO 150 F Work table 960 x 350 mm, Table height adjustment 230 mm, Sanding surface 1,050 x 150 mm, Belt speed 20 m/sec., Oscillation stroke 20 mm, Motor 3 kW (4 HP), Motor oscillation 0.25 kW (0.34 HP), Sanding belt dimensions 3,000 x 150 mm, Console for feed device, Veneer edge sanding device with contact shoe with fine adjustment and stop rulers, with grooved infeed ruler for veneer overhangs, Height-adjustable additional table with suction for sanding radii, Sanding unit can be swiveled up to 45° using a lever, Suction nozzle D = 140 mm, Weight approx. 295 kg from the Seevetal location as inspected, Dkjlinjvpq Ras Uikol without transport, subject to prior sale

Condition: ready for operation (used), Functionality: fully functional, FMB edge grinder Specifications: - condition - used - manufacturer - FMB - grinding belt dimensions - 90 x 2700 mm - working width - 227 cm x 75 cm ( length - width) - angle adjustment in the range of 0-90 degrees - main motor with power 1,65 kW, 710-1420 rpm. - pneumatic belt tensioning - extraction stub - fi 95 mm - 380V power supply - electric oscillation - pneumatic belt tensioning and blowing off - overall dimensions 230 x 150 x 140 cm ( l. x w. x h. ) Additional information: - the machine is in excellent technical condition, ready for immediate use - presented photos illustrate the actual state of the object of sale Dkelinjualits Uikjl - possibility to turn on and check the device on site - the price given in the auction includes VAT

Condition: ready for operation (used), working width: 1100 mm unit with rubber shaft unit with metal shaft and pad motor power 18,5 kW 20 - sections pad panel control variable regulated belt speed variable regulated feeding speed vacuum table cleaning brush belts pneumatic cleaning oscillation with photocells Dkslin Ustt Aiieikol overall dimensions: width: 1640 mm height: 2240 mm depth: 900 mm (without tables), 2140 mm (with tables)

Condition: used, Year of construction: 2007, machine/vehicle number: KKH CC+CC650, working width: 650 mm, grinding height: 155 mm, height adjustment type: electric, type of input current: three-phase, COSTA LEVIGATRICI KKH CC+CC650 Wide belt sander 4 grinding sections In both modules there is 1 steel roller and 1 rubber roller Delin Uijq Ii Hnekjkl min. grinding thickness 3mm max. grinding thickness 155mm Length of the ground piece from 350mm

Condition: new, Year of construction: 2023, Functionality: fully functional, total width: 5,600 mm, total length: 8,600 mm, total height: 12,200 mm, overall weight: 62 kg, rotational speed (min.): 1,420 rpm, roller diameter: 127 mm, rotational speed (max.): 1,420 rpm, feed rate X-axis: 300 m/min, input voltage: 230 V, grinding belt width: 76 mm, power: 1.1 kW (1.50 HP), LAGUNA 1632 SuperMax cylindrical grinding machine - Lever for quick unit height adjustment + micro device. Dkolin Uioqv D Uusksl - Digital display of workpiece thickness. - Special design of the cylinder cover for 15 % better extraction. - Lever for lifting the table when sanding wide workpieces. - Rigid cylinder adjustment. - Intelligent feed deceleration for larger material removal. - Supplied with base and crown 80 sanding belt. Developed by professionals for demanding workshops, smooth operation, narrow or wide workpieces, precise sanding and quick adjustments. - Type: 1632 SuperMax - Recommended use: Professional production - Power (230 V): 1.1 kW - Feed belt motor: 40 W - Speed: 1420 rpm - Cylinder diameter: 127 mm - Feed speed: 0-3 m/min. - Workpiece thickness min/max: 0.8 - 76 mm - Max. workpiece width: 406 (812) mm - Sanding belt width: 76 mm - Extraction: 100 mm - Minimum air flow: 1000 m3/hour - Length × width × height: 860 × 560 × 1220 mm - Weight: 62 kg - Packaging dimensions: 940 × 660 × 550 mm - Weight incl. packaging 71.7 kg Scope of delivery: - Base frame - Sanding belt, crowning 80

Condition: used, Combined edge grinding machine LASM type LBK 200 3P with several work stations for different grinding tasks. engine: 4 kW oscillation: Yes Dkjlsra Scrsin Uiksl table: tiltable Included: new sanding belts

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 450 kg, grinding belt width: 150 mm, extraction connection diameter: 140 mm, rotational speed (min.): 1,480 rpm, rotational speed (max.): 2,840 rpm, type of motor: three-phase motor, SAMCO Unilev150 double-sided edge grinder Specification: - condition - used - manufacturer - SAMCO - model - Unilev 150 -working height - 150 mm - grinding belt dimensions 150 x 2150 mm - two speeds of grinding belt - rollers for grinding inner curves - tops with dimensions 22 x 144 cm - both tops adjustable in angle from 0-30 degrees - motor power - 3,0 kW - pneumatic tensioning and oscillation of the belt - adjustable veneer sanding visor on one side and " back" 15x75 cm on the other side - attachment, protractor for sanding at an angle Dkjlin Uethh Rrsikol - extraction stub - fi 140 mm - year of production - 1988 - weight - approx. 450 kg - overall dimensions 144 x 71 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: ready for operation (used), working width 900mm combi unit with rubber roller and shoe Dkolinsvf Hp Ds Uikel electric table adjustment two feed speeds star/delta start weight 760kg

Condition: used, engine: 2,2 kW Spindle length per side: 175 mm · Spindle diameter max.: 35 mm Delinslfdxus Uikokl spindle diameter: 35 mm Carstens bench grinder for grinding and polishing wood and other materials with two spindles. · Dimensions LxWxH approx.: 1,750 x 700 x 1,100 mm · Further technical data on request

Condition: excellent (used), Functionality: fully functional, Edge, disc grinder 2-in-1 SAMCO DG-60 Specifications: - manufacturer - SAMCO - model - DG-60 - working height - 150 mm - paper size - 150 x 1870 mm - worktop with dimensions of 35 x 64 cm - motor power - 2.2 kW - mechanical belt tensioning and oscillation - the machine does not need pneumatics - diameter of the abrasive plate - 600 mm Dolisvgnagen Uikjkl - table top adjustable in angle +- 45 degrees - extraction stubs fi 120 mm - safety switches and CE markings - weight - approx. 400 kg - overall dimensions 110 x 120 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and shipping costs

Condition: excellent (used), Year of construction: 2008, working width 1100mm calibrating unit with steel shaft kombi unit with two rubber shafts and pad pneumatic oscillation with photocells activation of machine's functions from panel pneumatic pad two feeding speed year 2008 electric table regulation Dslinei Arr Ie Uikekl material measurement

Condition: used, Year of construction: 2017, Double-sided (top/bottom) grinding machine Stähle Hess Saturn Roto Finish for fine grinding of window scantlings or other woods. Two units, each with several surface-grinding, rotating tools, which also rotate around their own axis with the grinding unit and thus achieve cutting of the wood fibers with easy adjustment of the wood type. Application e.g. as a grinding machine after a planing machine in a window production facility. Technical specifications: see PDF Working width max.: 240 mm Dkslislfdw Non Uikol Max. wood height: 140 mm Wood height max.: 140 mm

Condition: excellent (used), Functionality: fully functional, Passing grinder OLIMPIA 200 with extraction Specifications: - condition - used - manufacturer - OLIMPIA - model - 200 - main motor 3.0 kW - max working width 200 mm - symmetrical tops with dimensions of 24 x 55 cm each - mechanical belt tensioning and oscillation - 1 sanding unit with viscera - built-in sawdust extraction - both tops adjustable - adjustable culageway at an angle of 12 x 60 cm Dkelin Uovgm T Sjikel - extraction stub - fi 80 mm - weight - about 250 kg - overall dimensions - 125 x 75 x 95 cm ( W x L x H ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site. - the price given in the auction does not include VAT

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation Dkslisiv H Rhen Uikel motor power 11kW year of production 2011

Condition: used, sanding belt: 300 x 1010 mm engine: 2,2 kW Drum sander or belt sander KED II HDZ for sanding wood and other materials. · Dimensions LxWxH approx.: 1,050 x 600 x 1,000 mm Dkolelfdxxoin Uiksl

Condition: ready for operation (used), Functionality: fully functional, total width: 1,670 mm, total height: 2,050 mm, total length: 1,200 mm, working width: 900 mm, grinding width: 900 mm, overall weight: 1,300 kg, grinding height: 100 mm, type of input current: three-phase, GHERMANDI 950 R wide belt sander Specifications: - manufacturer- GHERMANDI - model- CLG1NT 950 - working width 900 mm - max working height 100 mm - 1 working unit - hard rubber calibrating roller with a diameter of 280 mm - main motor with power 9,0 kW - working speed of conveyor regulated by variator in the range ~ 4-20 m/min - electronic indicator of the thickness of the ground piece - electrical up/down adjustment - oscillation of the belt on the optics - conveyor in very good condition - original painting - extraction ports 150 and 120 mm - grinding belt size - 950 x 2000 mm - weight - approx. 1300 kg - overall dimensions 120 x 167 x 205 cm (L x W x H) Djlinou Av Ibj Uikekl Additional information: - good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: like new (used), - Table length: 300 cm - Table width: 80 cm Dkolinjvfph Nj Uikel - Inverter: Smooth belt feed adjustment - Electric table height adjustment - Belt width: 150 mm - Power supply: 380V

Condition: used, engine: 1,5 kW Spindle length per side: 250/355mm Dkolinslfdxfe Uikel spindle diameter max.: 40 mm Greif DV30-0-0 double bench grinder for grinding and polishing wood and other materials with two spindles. · Dimensions LxWxH approx.: 1,400 x 400 x 1,100 mm · Further technical data on request

Condition: used, Loeser S0 profile sanding machine for sanding profiles using templates. The sanding belt is guided over the profile wheel/template and transfers the shape to the wood, which is manually guided through the machine. · Workpiece size LxWxH max. approx.: 500 x 300 x 100 mm · Extensive accessories motors approx.: 2 kW Dkjlislfdxijn Uikol Motors each approx.: 2 kW