Used radial drilling machines 1000-1299mm arm length for sale (63)

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Capacity: Max. 50mm in steel. Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Gsdpfxexftk Ro Af Teuh Dimensions: 2150x1060x2840mm Machine clamps hydraulically, equipped with emergency stop. Under power in our warehouse.

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Gedpfjy Rznwsx Af Tsuh Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Guedpfxew Hanhs Af Tjh Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: good (used), Year of construction: 1995, 1 used radial drilling machine Manufacturer: Breda Type: R 55 / 1250 Technical data: Drilling capacity: 55 mm Overhang: 1200 mm Drill spindle taper: MK 5 Drill spindle stroke: 310 mm Spindle speeds, 12 steps: 30 - 1200 rpm Right-hand and left-hand rotation Feed rate, 8 steps: 0.06 - 1 mm/rev Drive power: 4.4 kW Vertical movement of the arm: 705 mm Godpfxozlgvtj Af Tjuh Clamping of the arm and drilling unit: hydraulic Usable machine bed with 4 T-slots: 1325 x 910 mm Coolant system Space requirement: approx. L 2100 x H 2500 x W 1000 mm Weight: approx. 3000 kg

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Guodpozgdfbofx Af Tsh Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Gsdpfx Afeyba Rwe Touh

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm Gusdpfx Afswt Dwaj Teh arm length / mm workpiece height max. / mm Table dimensions: 1200x580mmTable dimensions: 1200x580mm

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. Godpfx Afexykcto Teuh The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: like new (used), Year of construction: 1990, Drilling capacity in steel: 50mm Gusdpsg I I Eksfx Af Toh Drilling capacity in cast iron: 63mm Spindle: MK4 Spindle Speeds: (12) 45-2000 RPM Drill head displacement: 350-1250mm Distance spindle base plate: 350-1420mm

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Godpfxev S Ay Ss Af Touh Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t Guodjtv Iklepfx Af Toh dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, For sale: radial drilling machine currently undergoing a complete overhaul in our facility. After completion, the machine will meet all technical standards and parameters comparable to a new machine. The machine will be fully operational and available for testing under power. ✅ 12-month full warranty covering all mechanical components and electrical system Technical specifications: Max drilling capacity steel / cast iron: 75 / 85 mm Max tapping capacity steel / cast iron: M56 / M68 Max distance spindle – table: 2000 mm Min distance spindle – table: 390 mm Spindle taper: MK5 Spindle speed range: 12.5 – 1600 rpm Spindle stroke: 350 mm Mechanical spindle feed Power supply: 400V / 3-phase Electrically raised/lowered arm Electric arm clamping Motor power: 5.5 kW Dimensions & weight: Weight: approx. 7000 kg Dimensions (L x W x H): 3275 x 1170 x 3280 mm Gsdpsy D Sr Hofx Af Tsuh Machine condition: Fully rebuilt and modernized Condition comparable to a new machine Available for inspection under power ✅ 12-month full warranty covering all mechanical components and electrical system Terms of sale: Location: Poland Delivery: FCA Bydgoszcz Loading included in price

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Gujdsy Ia Azjpfx Af Tsh Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device Gujdpfxovcrmpo Af Teh

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired Godpfxjvmtlho Af Teuh

Condition: used, Year of construction: 1957, Technical details: Gjdpfxovhbpqj Af Teuh bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Godpfx Aet T Rkdsf Touh Table 1000 x 1000

Condition: good (used), Breda radial drilling machine Type R 1220 MP 400 Volt, 3 kW Spindle taper MK 5 Arm length 1250 mm Gusdpfxex Rt Ezs Af Tjh Speed 30–1200 rpm with swiveling table

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Gjdpov Hngmsfx Af Tsuh

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Guodpfx Afsykkhxe Tsh Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Gjdpfjx U Ectjx Af Touh Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps Guodeu T Ty Hjpfx Af Teh - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Gusdpfxswa Tc Se Af Tjh Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm Gjdsm Sg R Dopfx Af Touh drive power 3 kw spindle speed 22 - 2000 rpm Weight 2 to

Condition: new, Year of construction: 2026, CORMAK 3040x1300 Radial Drill Press The CORMAK 3040x1300 radial drill press is an advanced industrial machine designed for precise drilling operations in materials such as steel and cast iron. The machine features a robust column construction and a wide range of radial arm adjustments, providing excellent stability and flexibility when machining large workpieces. Its key advantage is the ability to drill holes up to 40 mm in diameter while maintaining high precision. Main advantages of the CORMAK 3040x1300 radial drill press Heavy-duty construction weighing 1400 kg – ensures exceptional stability and vibration reduction, resulting in precise drilling and extended cutting tool life. Adjustable radial arm with a reach of 360–1300 mm – enables drilling in large and irregular workpieces without repositioning, increasing flexibility and reducing setup time. MK4 spindle taper with six speed settings (75–1200 rpm) – allows precise adjustment of machining parameters for different materials, enabling drilling holes up to 40 mm in steel and cast iron. 200 mm spindle stroke – allows deep drilling in a single cycle, improving production efficiency. 2.2 kW main motor – provides high torque for reliable continuous operation with optimized energy consumption. 0.75 kW arm lifting motor – enables smooth and fast vertical adjustment of the radial arm at a speed of 1.3 m/min, improving operator ergonomics. Cube worktable measuring 510 × 380 × 305 mm – allows secure mounting of irregularly shaped workpieces, increasing machining safety and accuracy. Ergonomic control panel – positioned at the front of the machine for intuitive operation and quick parameter adjustment, minimizing downtime. Ground column surface – ensures smooth and precise arm movement, eliminating play and improving positioning accuracy. Manual head and arm locking system – increases safety and stability during drilling by preventing uncontrolled movement. Three spindle feed rates (0.10, 0.16, 0.25 mm/rev) – provide precise control of the drilling process according to the material and machining requirements. Standard equipment B16 drill chuck (3–16 mm) Guodpei D Daqsfx Af Toh Drill chuck arbor B16/MK4 Reduction sleeve MK4/MK3 Drift key Cube worktable 510 × 380 × 305 mm Operating manual Technical specifications Parameter Value Maximum drilling diameter 40 mm Spindle axis to column distance 360–1300 mm Spindle axis to table surface distance 260–1300 mm Spindle stroke 200 mm Spindle taper MK4 Number and range of spindle speeds 6: 75, 130, 240, 380, 660, 1200 rpm Number and range of spindle feeds 3: 0.10; 0.16; 0.25 mm/rev Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Arm lifting motor power 0.75 kW Worktable dimensions 510 × 380 × 305 mm Machine dimensions 800 × 1800 × 2150 mm Weight 1400 kg