Radial drilling machine

REFORM RB50x12

Condition: ready for operation (used), Year of construction: 1995, A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal. Iodozh Ng Topfx Am Heig

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 Iijdpfxjyhrnuo Am Hjg EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm Iodpfx Amjk Dz N Is Hjig range of turning diam 460-1250mm

Condition: used, Year of construction: 1952, workpiece length 5000 mm swing dia. 1100 mm clamping length 6000 mm grinding diameter 1100 mm Ijdpfxoyt Rxvo Am Hjig grinding wheel diameter 1300 mm workpiece weight 2500 kg main drive motor 22 kW crankshaft bearing diameter 275 mm steady 100-250 mm speeds of tool 400/500 U/min workpiece turning speeds 20-40 U/min weight of the machine ca. 30 t 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Height 1422 mm Iiodpfxor Elpvs Am Hsg Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm Iedpfxevwgl Nj Am Hoig table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Iijdeu Sblwspfx Am Hjg Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm Ijdpfx Ajyz Db Ujm Hjig turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: excellent (used), pressing force: 150 t, table width: 3,100 mm, For sale: 1 used High quality / very good condition Bystronic Xpert 3metre x 150ton cnc pressbrake with powered lifting aid Bystronic Beyeler Xpert 150×3100 Make: Bystronic Model: Xpert150 Year / new: 2010 Total axis: 9 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 - and Powered Front Lifting Aid Hydraulic tool clamping Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 150ton Fully serviced with Bystronic Uk General Information: Model: XPERT150x3100 Manufactured: 2010 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Iisdottl D Nepfx Am Hsg

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives Iodpfxen D N H Ts Am Hoig ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.