Used press brakes with 200-299t bending force for sale (182)

Condition: good (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: Darley Bjdpfx Ao Ahwkkoknolp Model: 100 3100 Year of manufacture: 1995 Control: DR 23 Max. bending force: 100 tons Max. working length: 3100 mm Axes: Y1 and Y2, X1 and X2 Back gauge: 1500 mm Front gauge: 1300 mm Safety device: SIK Full-length tooling

Condition: good (used), Year of construction: 2003, Used Guifil press brake Type FCS 20 50 Capacity 2050 x 50 tons Delem DA65 CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Bedpfx As Ahwuwjknolp Includes a complete set of tooling (not shown).

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: EHT Model: EHPS 2030 Year of manufacture: 1995 Control system: Cybelec Max. working width: 3050 mm Bledpfxe Ahm Ibs Aknjp Clamping force: 200 tons Main motor: 18.5 kW Back gauge: 1000 mm Bending aid 2 Multi V dies 2 sets of split tools, 260 mm high Hydraulic crowning in the table

Condition: used, Bending machine Blodpfx Akj Ahulysnop fixed price loaded onto a truck

Condition: refurbished (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 28668, operating speed: 12 mm/s, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 220 t, table length: 4,000 mm, type of input current: three-phase, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, Control:Touch-B Axes:Y,X,R,Z1,Z2,XZ,W and EFL Bjdpfx Akezn Arpenjlp Clamping:wila hydraulic clamping Machine weight: approx. 21000 kg Type: PPEB 220/40 EFL Serial number: 28668 Without tools New R axe spindles New belts : Z axes and tilting Machine front side repainted. New venillators inside the heat exchanger. Wila clamping system checked and realigned,two middle segment changed to new ones.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 183 h, control type: CNC control, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, bending force (max.): 290 t, working width: 4,000 mm, Equipment: documentation/manual, BOSCHERT G-Bend Plus 4290 Blsdpfxsywfp So Aknjp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, stroke length: 200 mm, throat depth: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table height: 900 mm, oil tank capacity: 350 l, overall weight: 16,950 kg, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, clearance between the columns: 3,820 mm, distance table to ram: 400 mm, ram plate length: 4,270 mm, table length: 4,270 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 Bjdpfx Aksz Eqwlenolp • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: excellent (used), functionality: fully functional, Platform length: 2500 mm Platform width: 1250 mm Maximum press height: 340 mm Bsdpfx Akj Ahnk Eonjlp Number of cylinders: 4 Pressing area: 2.0 m² Specific pressure: 2.0 kg/cm² Total required pressure: 200 atm (atu) Available at the end of November 2026.

Condition: used, functionality: fully functional, Year of construction: 2018, stroke length: 250 mm, overall weight: 17,500 kg, power: 26 kW (35.35 HP), input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, pressing force: 250 t, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Bystronic Xpert Pro 250/3100 press brake, manufactured in 2018. Model: Xpert Pro 250/3100 Year of manufacture: 2018 Serial number: BY041049 Bledpfj Adt S Nex Aknep Working length: 3100 mm Maximum pressing force: 2500 kN Maximum stroke: 250 mm Weight: 17500 kg Main motor power: 22 kW Total connected load: 26 kW Operating voltage: 3-phase 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current of the upstream fuse: 80 A Maximum pneumatic operating pressure: 8 bar Maximum hydraulic operating pressure: 310 bar Self-assembly and ex works. If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 1999, stroke length: 180 mm, overall weight: 16,000 kg, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, pressing force: 220 t, table width: 4,000 mm, type of input current: three-phase, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Serial number: HFBO22040H991018 Bending length: 4,000 mm Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Bljdpfx Aozzknrjknsp Number of phases: 3 Machine weight: 16,000 kg Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2008, total length: 3,400 mm, total width: 2,180 mm, total height: 2,780 mm, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 35 A, input frequency: 50 Hz, pressing force: 160 t, type of input current: three-phase, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Ermak AP3100-160 press brake, manufactured in 2008, for sale. Power type: 3 AC Bjdpfozqav Dex Aknelp Frequency: 50 Hz Operating voltage: 380 V Control voltage: 24 V Rated current: 35 A Rated current of the main fuse: 50 A Electrical wiring diagram no.: SN20080089 The machine is fully functional, and the last safety inspection was carried out in 2023. The machine is equipped with a press brake safety device (light curtain), which was also last inspected in 2023. Total weight of the machine: 9 tons Various tools (see photos) as well as the operating manual and safety inspection history are included in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 81511, control type: CNC control, bending force (max.): 225 t, overall weight: 25,000 kg, Equipment: european tool clamping system, Used HACO press brake ERMS432225, year of manufacture 2002, serial no. 81511 Blodpfsyml D Tsx Aknsp

Condition: used, functionality: fully functional, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, pressing force: 250 t, table length: 4,050 mm, type of input current: three-phase, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Blodpoy D Sy Rsfx Aknsp Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Y1, Y2, and X-axis CNC Bodpfx Asz N Exgjknolp Includes a set of tooling

Condition: used, USED Ursvikens 4.1m x 200 Ton, Cybelec ModEva 12S Control, Year 1999, Complete with Tooling Ram & Depth Axes Y1 & Y2: Control of the vertical descent and depth of the left and right hydraulic cylinders. Backgauge Horizontal Axes (Depth) X1: Control the horizontal forward and backward movement of the left and right backgauge fingers. Backgauge Vertical Axes (Height) R1: Controls the vertical up-and-down height adjustment of the backgauge finger. Backgauge Lateral Axes (Left-to-Right) Z1 & Z2: Control the independent lateral positioning (left-to-right movement along the beam) of the backgauge fingers. VDT (Variable Die Tool): The VDT is the CNC controlled axis that automatically adjusts the opening width (the V-opening) of the lower die. MAF (Manual Adjustable Finger): Manual adjustable backgauge finger (forward and back movement) on Z2 Axis. Blsdpfxo Act Ege Aknsp Ursviken Optima 200 CNC Press Brake - 200 Ton x 4100mm Ram & Depth Axes Quality Swedish-built Ursviken Optima 200 CNC hydraulic press brake with 200 tonne bending capacity and 4100mm bending length. Designed for demanding fabrication environments, Ursviken press brakes are renowned worldwide for their robust construction, precision bending performance and long service life. Suitable for a wide range of sheet metal and fabrication applications, including structural steelwork, architectural metalwork, agricultural equipment, machinery manufacture and general engineering. The machine combines substantial pressing force with a generous working length, making it ideal for both heavy-duty and high-accuracy bending operations. Ursviken's reputation for reliability and engineering excellence has made the Optima series a popular choice amongst fabrication companies seeking dependable, high-capacity bending equipment. Available for inspection under power at Bowland Trading Ltd. Key Features 200 Tonne Capacity 4100mm Bending Length CNC Control Hydraulic Operation Heavy-Duty Fabrication Capability Swedish Manufactured Machine Suitable for Sheet Metal & Structural Fabrication

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, stroke length: 365 mm, pressing force: 250 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) Bledpfxsz Iqmrs Aknsp • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 4,060 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 4,200 mm, operating speed: 90 mm/s, table height: 1,000 mm, back gauge travel distance R-axis: 150 mm, overall weight: 17,000 kg, total length: 5,300 mm, total width: 1,950 mm, total height: 3,000 mm, warranty duration: 6 months, pressing force: 200 t, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Bsdpsvpqpisfx Aknjlp Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 200x3100, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 215 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, overall weight: 12,000 kg, number of support arms: 4, pressing force: 200 t, working range: 3,100 mm, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Used High quality / very good condition Bystronic Xpert 3metre x 200ton cnc pressbrake for sale Bystronic Beyeler Xpert 200×3100 Make: Bystronic Model: Xpert 200 Year / new: 2008 Total axis: 8 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 Hydraulic upper and lower tool clamping Tool stacking system Crowning Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 200ton Fully serviced with Bystronic Uk General Information: Model: XPERT2000x3100 Manufactured: 2008 Bsdpfx Ajvua Ifoknjlp Specification: Working length mm 3100 press force kN 2000 stroke mm 215 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weigh 12,000kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Press force: 225 t Bledezw Adqepfx Aknop Bending length: 3050 mm Throat depth: 405 mm Table width: 140 mm Machine weight (approx.): 14,100 kg Space requirement (approx.): 4000x1900x3100 mm Accessories: - Control system upgrade in 2026 to Cybelec VisiTouch - 1 bending aid - Side protective doors - Laser safety system - Pneumatic tool holder EHT 26 mm - Crowning - Pneumatic die shifting - Foot switch - Controlled axes: y1, y2, x, R, z1, z2

Condition: new, Year of construction: 2026, pressing force: 200 t, Sheet metal bending press – 200 T – Open width 1,600 mm For sale is a hydraulic sheet metal bending press from the manufacturer DURENDUS with a maximum pressing force of 200 T. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm, and a stroke of 1,000 mm, making it suitable for bending, forming, and straightening operations in industrial applications. ##### Technical data + information: Sheet metal bending press – 200 T – Open width 1,600 mm Bedpfxezg Nu Ue Aknjlp ==== General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Design: 2-column frame press - Manufacturer: DURENDUS - Pressing force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Ram surface area: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg ==== Hydraulic cylinder - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylinder diameter: Ø 220 mm - Piston rod diameter: Ø 130 mm - Column guides: Ø 160 mm - Working speed: 3 mm/s - Approach speed: 9 mm/s - Retract speed: 20 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Flow rate: 40 l/min - Motor power: 7.5 kW - Pressure accuracy: ±5 bar - Tank volume: 160 l - Hydraulic oil: HLP46 (not included in the scope of delivery) ==== Control system - Operation: Foot pedal - Pressure adjustment: manually via rotary control - Stroke limitation: manually via sensors - Safety PLC - Control panel with warning and status indicators ==== Safety - Safety PLC - CE-compliant design - Safety monitoring of all processes ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 7.5 kW - Total connection power: approx. 11 kW - Protection class of the switch cabinet: IP54 ##### Application areas: Bending, forming, sheet metal processing, metalworking, steel construction, container construction, mechanical engineering, contract manufacturing, small series production (Sheet metal bending press, hydraulic sheet metal bending press, hydraulic press, 200 T press, 200-ton press, bending press, sheet metal bending machine, forming press, industrial press, coil bending press, battery coil press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety standard NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulic systems of the presses primarily use components from leading European manufacturers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, pressing force: 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Darley hydraulic press brake, 230 tons x 6200 mm, CNC control Delem DA65W Y1/Y2/X/R + crowning + laser safety system. Bedpfx Ae Abalwjknslp Machine in good condition, with annual maintenance performed by Darley.

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance Bledjz Rl Nhspfx Aknsp - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Distance between frames: 3600 mm Stroke: 265 mm Bsdpfx Ajyrdgqsknslp Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Dimensions: 5200 x 1900 mm Height: 2930 mm Weight: 12,750 kg

Condition: new, functionality: fully functional, Year of construction: 2026, operating speed: 80 mm/s, oil tank capacity: 200 l, overall weight: 11,000 kg, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, input voltage: 400 V, warranty duration: 12 months, workpiece weight (max.): 11,000 kg, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, spindle motor power: 11,000 W, product height (max.): 455 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 – 200 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm Blodpfxezg Ebwe Aknop • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 40225, control type: CNC control, actuation type: hydraulic, bending force (max.): 225 t, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Bjdpfxsyhxtuj Aknelp