Press brake

Bystronic Xpert 200 x 3100

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Lajdpfjwr Dv Hox Agroi

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Laodpfx Aevn U Adjgrsi Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Year of construction: 2004, condition: used, machine/vehicle number: 0201-220031, FICEP DZ 603 drilling machine for sectional steel The Ficep DZ 603 is a drilling machine with 3 drilling axes for profile processing. This 3-axis drilling machine is designed for profile beam processing in steel construction. Steel profiles can be drilled and center-punched automatically on 3 axes (flange and web). The CNC control from Mitrol with Arianna software takes care of programming the drilling system. CAD data in DSTV or DXF format is converted into NC data in the CNC control and the machine starts the machine program in which the axes are moved to the specified position. A gripper measuring carriage positions the profile at the appropriate drilling position in the drilling unit. A 5-fold tool changer ensures fast drill bit changes on the individual drilling axes. A stable roller conveyor transports the steel profiles in the infeed and outfeed areas. Technical description Ficep DZ 603 drilling unit: Beam height: max. 610 mm Flange width: max. 450 mm Machining length: max. 11,300 mm CNC control Mitrol ARIANNA 3 drilling spindles suitable for HSS cooling channel drills Spindle speed: from 180 to 1000 RPM Drill diameter: min ø 8 mm - max ø 40 mm Power of the drilling spindles 7.5 kW each Lasdpfxsrr Taue Agrji The DZ603 drilling machine is sold without marking unit.

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function Laodpeqrqvhefx Agrei - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: good (used), Year of construction: 2012, •Euromac MTX Flex 12 1500/22/ 2500 •A lot of tools included. •Year of construction 2012 •Multitool 6 •Multitool 10 •CE Safety features •Table extensions for 4 meters •Vacuum system • X-axis 2500mm with positioning 10000mm •Y-axis 1500mm Ljdpfx Aowk Ntujgreai MTX flex 12 • 3 Autoindex stations D - 360° pragrammable • 3 Fixed stations D • 6 Fixed stations B with ACTIVE Die System • Direct DRIVE System •Automatic repositioning of the hydraulic plate clamps. • Standard 2 plate clamps • Simple system for loading plates. • Automatic lubrication of the multi-tool and tools • Movable control console • Machine software TPT (TOP PUNCH TOUCH) with 21.5 inch LED touch screen. • Table with brushes • Folding table at the front (L 850) • External cooling system • UPS system: protects the console PC against voltage drops and guarantees up to 30 minutes of power supply in the event of a power interruption. • Die holder 2 x D, 1 x C, 2 x and 1 x Adapter from B to A • Punch adapter: D/B, D/C, B/A. • Operating instructions (paper and electronic). • Preparation for online service (internet connection required). • USB memory stick. • Electrical preparation for the loading and unloading system.

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m Ledpfx Agev T Np Asreai toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, CME TRAVELING COLUMN MILLING / BORING MACHINE CME TECHNICAL FEATURES - VISIBLE IN OPERATION Brand: CME Model: MB 9000 Year: 2007 CNC: Siemens Sinumerik 840D X-axis: 9000 mm Y-axis (Vertical): 4000 mm Z-axis: 1000 mm W-axis (Ø 150 mm): 700 mm 2 rotary translation tables (linear travel: 2000 mm) 2500 x 2500 mm (25 TN) capacity Heidenhain optical scales on all axes Direct spindle 90-position tool change Laedpju R Rk Hsfx Agrsi ZF range change Internal coolant Chip extractors

Condition: excellent (used), Technical specifications: Revision in 2024 Working length: 3100 mm Column width: 2760 mm Press force: 220 tons CNC control: OPERATOR II Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Motorized adjustable backgauge Lodpfx Agev Tcnljrsai Thrust: 650 mm Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Lsdoh Auahepfx Agrjai Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing Ledpfowzkzzox Agrsai General Specification: - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set