Used Press brakes with 120-149t bending force for sale (105)

Condition: used, One-piece prism block for press brake Bending tool for press brake Reversible prism with 6 different prisms Prism sizes: 30 mm with 3 mm radius for 90°, 40 mm with 4.5 mm radius for 90°, 50 mm with 4 mm radius for 90°, 18 mm for 90°, 10 mm for 90°, 12 mm for 45° Dimensions: 90 x 88 mm Prism length: 3000 mm Weight: 147 kg Hsdpfx Aswbvmcsfiefn Good condition

Condition: good (used), HACO - Atlantic HPA 30 - 135 / Good condition with tools - Press force 135 tons - Bending length 3050mm - Passage between the stands 2550mm - Complete upper beam / tools and separate segments in various lengths - Two dies - Motorized height adjustment - Manual back gauge - Front support 2x - Foot switch / hand switch Dimensions: LxWxH 4x1.8x2.4 meters / Weight 8500Kg Errors / input mistakes reserved Hodowqx E Hopfx Afiofn

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Hfodpfswcz Axox Afion

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Hydraulic press brake PPBL 135/30 Year of construction 2000 Machine number 26938 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; Hfedpfxow Hca Ho Afijn • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • D10.180.78.20 5x508mm • Multi-V M90 1x3050mm

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: P 648, control type: CNC control, oil tank capacity: 290 l, overall weight: 9,500 kg, power: 11 kW (14.96 HP), Built for a globally leading cooperation partner. Last machine from the pool. Machine is as good as new. The High Quality Press Brake (HQPB) is the top model among Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to electrical cabinet construction, is carried out in-house. By combining state-of-the-art technology with decades of experience in forming technology, the HQPB series allows you to perform bending at the highest level. The standard configuration already provides a fully functional press brake. With this package of safety, reliability, and efficiency—paired with user-friendly operation—we are able to meet the highest demands and precision requirements in the bending process. Machine Frame: - Base machine constructed from steel S 355 N - Side frames welded with 2 pressure pipes and top-mounted oil tank - Above-floor design - Coating (2-component textured paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relieved annealed - Depth penetration measurement, reader head guided by ball roller guide - Separate Y1 and Y2 control, electrical angular misalignment monitoring Hydraulic System: - Hydraulic proportional control valve system with electronically monitored cylinder parallelism - Solid steel cylinder with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, max load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping bar, dimensions: 95 mm high, 95 mm wide - Centrally adjustable crowning system, WILA system, CNC controlled, NSCR-I-MC. Two mechanically adjustable wedge bars compensate for deflection - Single-V die holder (13x20) - Working height: 1050 mm (with 55 mm tool height) Front Side of the Machine: 2 aluminum support arms in the front, approx. 600 mm long, incl. 2 tilting stops, measuring tape, and plastic wear strip. The support arms are movable on a linear ball guide and can be height adjusted for 55 mm to 100 mm high dies using a slotted hole. The linear ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge "2-axis controlled": Hfodow Nhhgopfx Afion - X- and R-axes CNC controlled - Z-axis manual Delem DA 66 Touch control on swivel arm incl. Profile S-Lite offline programming software. Safety equipment according to CE standards Technical Data and Working Range: Press force: 1250 kN Working length: 3100 mm Clearance between uprights: 2600 mm Installation height: 450 mm Throat depth: 305 mm Ram stroke: 265 mm Ram Speeds: Rapid traverse max: 220 mm/s Pressing speed max: 9.8 mm/s Return speed max: 160 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electrically limited to ± 5 mm Lower beam height above floor: 900 mm Motor power: 11 kW Main Dimensions: Pit depth: 0 mm Side frame pit depth: 0 mm Machine weight: approx. 9.5 t Tank capacity (hydraulic oil): 290 l (Technical changes reserved) Lighting behind the machine: Workspace illumination using LED light strip between the uprights.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Pressure: 85 t Bending length: 2050 mm Frame gap: 1750 mm Control: DELEM Stroke: 215 mm Hsdpfx Afjw D Abrjijfn Throat depth: 410 mm Total power: 13 kW Weight: 8,750 kg Machine dimensions: 3190 x 2100 x 2375 mm

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Hjdpfshmmfkjx Afijfn Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, pressure 125 t chamfer lenght 3550 mm distance between columns 3050 mm stroke 250 mm table width 120 mm table height 900 mm column arm 320 mm return speed 100 mm/sec working feed 10 mm/sec control Cybelec DNC 70 quantity of oil ca. 250 l Hfsdpjkpwubjfx Afisn total power requirement 11 kW weight of the machine ca. 11 t dimensions of the machine ca. 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 885669, bending force (max.): 130 t, working width: 3,050 mm, stroke length: 365 mm, throat depth: 410 mm, clearance between the columns: 2,800 mm, TECHNICAL DETAILS Pressing force: 130.0 t Working area Working width: max. 3,050 mm Max. stroke: 365 mm Throat depth: 410 mm Distance between columns: 2,800 mm Hfodpfxew Dqcko Afijn Number of axes: 6 Control Control: CNC Control type: Delem DA65 Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I + crowning MACHINE DETAILS Dimensions and Weight Overall length: 3,500 mm Overall width: 2,200 mm Overall height: 2,400 mm Weight: 11,000 kg EQUIPMENT WILA hydraulic clamping Angle measurement system Documentation CE marking

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, Rear gauge 5 axes (X-R-Z1-Z2-X1), electromechanical WILA table crowning, Press force 135 Ton, bending length 3050 mm, table/ram opening 400 mm, cylinder stroke 200 mm, throat depth 400 mm, table width 120 mm. Year 10/2004. Hfedpswz H Svjfx Afijn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 4,300 h, Trumpf TruBend 5130 press brake (2007) This Trumpf TruBend 5130 bending machine was manufactured in 2007. It has a work order of 13,892 production hours. The Trubend is equipped with a Trumpf DA 65 TW control unit. This machine can work with a pressing force of up to 1200 kN. Trumpf TruBend 5130 press brake Hjdpowypizjfx Afijfn Manufacturer: Trumpf Type: Trubend 5130 Year of manufacture: 2007 Condition: used, good Operation hours: 36,940h Hydraulics running time: 22,490h Press beam running time: 4,264h Crafter running time: 242h Max. bending length 3230 mm Distance between the columns 2690 mm Max. pressing force 130T Distance between table mount 470 mm Max. stroke 445 mm Number of controlled axes 4x Stop fingers 8x Upper tool clamp hydraulic Lower tool clamp hydraulic Crafter CNC BendGuard Tasc 6000 control Bending aid front 1x Total connected load approx.: 24 kVA Weight approx. 11,000kg Space required: 2840 x 4060 x 1740 mm Note: Without tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 10883, working width: 3,550 mm, stroke length: 250 mm, pressing force: 130 t, operating pressure: 310 bar, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Table width: 120 mm Column width: 3,050 mm Installation height: 510 mm Throat: 320 mm Stroke: 250 mm Working height: 900 mm Slide speed, empty down: 120 mm/s Slide speed, full press: 11.5 mm/s Slide speed reduced: preselectable Slide speed up: 100 mm/s Control & Axes Control: Cybelec DNC 80 Axes: Y1, Y2, X, R Hfodpfxjwyniyj Afijn MACHINE DETAILS Machine weight: approx. 12,000 kg Space requirement: approx. 4,050 x 2,100 x 2,850 mm Operating pressure: 310 bar Oil capacity: 250 l EQUIPMENT - Die shifting with handwheel - 4 stop fingers - Hydraulic WILA punch clamp - Hydraulic AMADA die clamp - 2 support arms - Safe two-hand/foot operation - Various punches and dies

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: CYBELEC DNC 70, bending force (max.): 130 t, working width: 3,550 mm, stroke length: 250 mm, distance between stands: 3,050 mm, TECHNICAL DETAILS Press force: 130 t Bending length: 3,550 mm Frame gap: 3,050 mm Stroke: 250 mm Control: CYBELEC DNC 70 Controlled axes: y1, y2, x, R MACHINE DETAILS Machine weight: approx. 11,600 kg Space requirement: approx. 4,000x2,000x3,000 mm EQUIPMENT - 2 support arms - Two-hand foot control - Wila tool clamping top and bottom - Crowning system - Side safety guards Hjdpfx Afjww E Twjiefn - 4 manually adjustable backgauge fingers

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm Hfedpjthgidefx Afion can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 1998, Pressing force 135 t Bending length 3600 mm Frame gap 3000 mm Throat depth 415 mm Distance table/press beam about 430 mm Stroke length about 175 mm Working height 950 mm Approach speed 100 mm / s Working speed 7 mm / s Return speed 100 mm / s Hfodpfx Afewa R Rasijn Drive power about 15 kW Dimensions L x W x H 4800 x 1900 x 2620 mm Weight 9500 kg Accessories / Special Features: • 5-axis CNC control HACO BC 45 Graphic Y1 +Y2, X, Z, R for depth of penetration and back gauge forward/back + up/down, stop fingers together/apart • Conical bending possible • Hydraulic synchronization control • Manual table crowning by handwheel under the die with SIKO counter, and adjustable via wedge in the tool cassettes • Segmented upper tools • Tool holder system "PROMECAM" • Segmented universal die with collector rail • Fast, precise, and easy to regulate • Two-hand control panel, electric foot switch, and EMERGENCY stop • Electrically protected safety doors • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Pressure: 135 t Bending length: 4050 mm Frame width: 3150 mm Installation height: 310 mm Ram stroke: 130 mm Throat depth: 200 mm Approach speed: 100 mm/sec Working speed: 8.0 mm/sec Return speed: 65.0 mm/sec Table width: 180 mm Table height: 900 mm Hfjdpfx Ajwx E Hyefisn Control: ELGOP8822 Operating pressure: 220 bar Total power requirement: 8.5 kW Weight: 8700 kg Dimensions L-W-H: 4500 x 1700 x 2640 mm

Condition: new, Synchronized Hydraulic Press Brake MVD Hsdpfx Aefh Nz Hsfijfn Mod. I-Bend A 3100 135 Videographic Numerical Control Touch Screen ESA S630 Controlled axes No. 4 (Y1-Y2-X-R) Motorized compensation table Promecam type tool attachment with quick release lever Multi-beam barriers NEW ELECTRONICS DSP LASER Motorized rear register mm 750 Bending length mm 3100 Power exerted Ton 135 Groove mm 410 Stroke mm 210 Opening mm 415 ROLLERI multi-slot upper tools and lower dies supplied

Condition: used, Year of construction: 2009, pressure 135 t chamfer lenght 3600 mm Hfedpfx Afjwnt Ecoisn distance between columns 3150 mm throat 250 mm stroke of upper beam 200 mm dayligth 400 mm ajustment speed 70 mm/sec working feed 10 mm/sec return speed 80 mm/sec table height 915 mm total power requirement 15 kW weight of the machine ca. 8800 kg dimensions of the machine ca. 4200 x 1700 x 2600 mm

Condition: used, Year of construction: 1998, Pressure 130 t Hsdpfx Aowgkwtsfijfn Bending length 3550 mm Column width 3050 mm Stroke 250 mm Cybelec control system Machine weight approx. 11,600 kg Space required approx. 4000 x 2000 x 3000 mm Accessories/Equipment: - CYBELEC DNC 70 control system - 2 support arms - 2-hand foot control - Wila tool holders, top and bottom - Crowning - Side guards - 4 manually adjustable stop fingers - Controlled axes: y1, y2, x, R

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm Hsdpogi Dk Defx Afisfn - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: good (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, stroke length: 220 mm, throat depth: 410 mm, distance between stands: 2,610 mm, number of axes: 8, type of crowning: CNC-controlled, back gauge adjustment: CNC-controlled, overall weight: 10,500 kg, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, power: 9 kW (12.24 HP), pressing force: 125 t, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning Hodpowrx Tmjfx Afiefn CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: new, Year of construction: 2024, working width: 3,100 mm, throat depth: 410 mm, operating speed: 120 mm/s, reverse speed: 160 mm/s, back gauge travel distance Z-axis: 750 mm, overall weight: 7,600 kg, power: 11 kW (14.96 HP), working length: 3,100 mm, READY MACHINE DELIVERED IMMEDIATELY FROM STOCK MAXIMUM WORK THICKNESS : 6 MM. (135 TONS) MAXIMUM WORK ETC: 3100 MM. 4 AXIS + MOTORIZED CAMBERING ALL HYDRAULIC COMPONENTS REXTROTH (GERMAN BOSCH COMPANY) + REXTROTH SCREW SHAFT + REXTROTH HYDRAULIC BLOCKS WITH PROPORTIONAL VALVES + REXTROTH OIL PUMP ALL SERVO MOTORS MITSUBISHI BRAND CONTROL UNIT CYBELEC TOUCH 12 SERIES Hodpfxer Ugv Te Afijfn DIGITAL RULERS OPKON MOLDS ITALIAN ROLLER BRAND

Condition: good (used), functionality: fully functional, Year of construction: 1999, with control conversion to CYBELEC Visitouch 19 Pressure 125 t Bending length 4050 mm Frame width 3550 mm Throat depth 300 mm Installation height 560 mm Stroke 240 mm Back gauge - adjustable 5-1000 mm Hjdowqfaqjpfx Afiefn Control CYBELEC Visitouch 19 Dimensions L-W-H 5200x2200x3000 mm Total power requirement 18.5 kW Machine weight approx. 14,500 kg Equipment: - front bending aid - back gauge with 8 stop fingers - AKAS laser safety device in front of the machine - V-die block - segmented - upper tool - die shifting - two-hand operation - manual crowning - pneumatic upper and lower tool clamping

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps Hfsdogi Dldepfx Afisn - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 1999, Press force 230 t Bending length 3060 mm Distance between uprights 2690 mm Stroke 365 mm Control DELEM DA 66 T Distance between posts 2690 mm Dimensions 3660 x 2310 x 3100 mm Machine weight approx. 17,700 kg Equipment: - 2-hand foot switch Hodjwn Efujpfx Afijfn - Side safety doors - Safety door behind the machine - Control renewed in Delem DA 66 T