Used Rake Angle for sale (7,794)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke Gbedpfx Asmck Ryjk Ujt - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_20250008, functionality: fully functional, operating hours: 500 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System Gjdpfxozymb So Ak Uebt CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 used Petschauer PLT800 Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment. Gbodpfxezz Rlkj Ak Ust Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle. Additional applications: Setting the tooth back Setting the chamfer on TCT saw blades Face grinding with the help of a diamond grinding wheel Re-sharpening on the circumference of the saw blade at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm Depth: 72 cm Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Diamond cutting disc: 150 or 175 mm Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz Fuse protection: 3 slow-blow fuses 10 A

Year of construction: 2013, condition: used, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Gbsdpfxjzf N Ire Ak Uet Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable Gbedpfx Akevi Enas Uot blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR Gjdpfotrkmnjx Ak Uebt MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. Gbjdpfxszzkwge Ak Ust A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Gsdozzkvcopfx Ak Uebt Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Gsdpfezyccxsx Ak Uobt Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

Condition: used, Year of construction: 2018, machine/vehicle number: A0221E1033, functionality: fully functional, operating hours: 31,621 h, table width: 1,500 mm, table length: 3,000 mm, Power: 3000 W Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee. Godpfxjzzyl Hs Ak Uobt

Condition: good (used), Year of construction: 2007, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 570 mm, overall weight: 315 kg, - Universal measuring device for measuring tools in transmitted light (2D) and incident light. - Easy to use thanks to photorealistic input dialog on 2 displays and automatic cutting edge recognition. -Swivel device for radial and axial measurement in incident light. - Special measuring programs for radius contour, rake and clearance angle, chamfer width, wobble compensation, step drills, concentricity and much more. - Contour progression measurement >lasso< with nominal/actual comparison. - Incident light image processing >metis 2D< - Protocol editor >Matrix< Technical data Travel Z 570 mm X 152 mm Measuring range - Longitudinal axis Z 570 mm - Diameter 250 mm - Repeat accuracy ± 0.002 mm - Setting accuracy < 2μ Gjdpjqc Tkbefx Ak Ujbt - Display accuracy 0.001 mm - Positioning accuracy 0.001 mm - Concentricity accuracy 0.002 mm Optionally, another machine can be offered as a spare parts carrier. However, this is defective.

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Gjdpfxsyypb Re Ak Uebt Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: used, Year of construction: 1994, Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades. Accessories: Gjdpfxezgucds Ak Uobt Motorized rake angle adjustment, Coolant system, Automatic central lubrication, Machine light, 2 grinding wheel holders, 1 sawblade mounting bolt. sheet thickness: up to 8 mm Tooth pitch: 6 to 120 mm rake angle: - 15° to + 25° Tangential free angle: 0° to 6° Radial free angle: - 4° to +6° Connection value: ca. 1,1 kW (400 V / 50 Hz) Weight: about 1150 kg Grinding wheel diameter: Max. 125 mm Bore diameter: 32 mm Dimensions L x W x H: 1340 x 1400 x 2000 mm colour: green Circular saw outer diameter: 80 to 460 mm

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Gbedozzbafopfx Ak Uet Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Year of construction: 2023, condition: ready for operation (used), Automatic Cut, Strip and Terminate Machine manufactured in 2023. This WIRMEC AM310-117 features a programmable wire deposit unit, crimping unit with 20 kN force, and a 2 m conveyor system. It offers various processing functions including automatic wire cutting, double-sided wire stripping, and terminal insertion. If you are looking to get high-quality wire processing capabilities, consider the WIRMEC AM310-117 machine we have for sale. Contact us for further details. • Power Supply: 400 V • Electrical Configuration: 3 Phase + Neutral + Ground (3F + N + T) • Frequency: 50 / 60 Hz Godpfx Akoyr Rg De Usbt • Installed Power: 10 kW • Main units included: • Cut, strip & terminate unit • 2 m conveyor system • Programmable wire deposit unit (active and passive) • Twisting unit • Fluxing and soldering station • Crimping unit – 20 kN with quick locking tool system • Crimp force monitoring system • Terminal detecting device • Pick & Place inserter unit with 3 motorized axes • Belt drive feeder system • Processing functions: • Automatic wire cutting • Double-sided wire stripping • Single-side terminal crimping • Single-side wire twisting • Single-side wire tinning (soldering) • Automatic terminal insertion into connector housing • Combined processing operations in one cycle • Connector flexibility: Machine can be modified or adjusted to process different connector types. Additional equipment • Cut and strip V blades (R0.5, rake angle 30°/15°, tin-coated steel) • Wire straightening unit • Wire guide system

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm Godpfx Aksz Aa Eij Usbt - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Gedpfx Akjzxngge Ujbt Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Stroke: 100 mm Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Gbodpoyvgf Dsfx Ak Ust Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: used, Year of construction: 2021, machine/vehicle number: 12986, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 12986 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Gbjdpfxez Aa Ecj Ak Ujt Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2022, machine/vehicle number: 13180, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2022 - Serial number: 13180 - Bending force: 40 t - Working length: 1300 mm Gedjz Aa E Nspfx Ak Uobt - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Gbedpfxjzx Anxj Ak Ujt Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Year of construction: 1994, condition: ready for operation (used), - USED - CNC HYDRAULIC SHEAR WITH DRIVEN BACK GAUGE CUTTING LENGTH: 3100 mm MAX CUTTING THICKNESS: 6 mm Gsdpfx Aoxy Tpcok Usbt BACK GAUGE TRAVEL: 750 mm ANGLE VARIATION: 0°30' - 2°30' CONTROL UNIT: ENC1 TASK84 No OF PLATE HOLDERS: 16 WEIGHT: 6700 Kg OVERALL DIMENSIONS: 3290 x 2130 x 1705 mm NOTE: RAKE CUTTING ANGLE; ADJUSTABLE BLADE GAP; SHEET METAL CONVEYOR

Condition: good (used), DEM GP4520 APM Angle Sealer with Shrink Tunnel Made in France. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Gsdpfxezurzmj Ak Uobt Automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel, including sealing time, material feed time, sealer open time, conveyor belt speed, etc. Sealer dimensions: 470 x 555 mm Weight: 400 kg Power supply: 380V Installed power: 8 kW Capacity: 900 pcs/h

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Gbodpfozzwy Iex Ak Uet Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW

Condition: refurbished (used), functionality: fully functional, grinding wheel diameter: 150 mm, year of last overhaul: 2026, disc diameter: 150 mm, grinding spindle motor power: 2,200 W, compressed air connection: 5 bar, The machine has been completely disassembled, all wear parts have been replaced, and it has been repainted – it is in like-new condition. Sale includes a functional guarantee. Key features: - For resharpening and re-toothings of HSS segment, CV, and solid carbide saws using the CBN deep grinding process Tooth form A, Aw, B, Bw, and C according to DIN1840 - Grinding of Vario teeth (option) - Grinding of special teeth (option) Gbodpjpgkgqjfx Ak Ujt - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely adjustable (programmable) tooth geometry - Grinding of repair segments for segment saws - Chamfering on alternating top/bottom or on one side - Rake and clearance angles can be continuously adjusted - Improved machine guard for easy opening/closing Key advantages: - Short grinding times with high surface quality due to stable machine design with adapted clamping flanges for the saw blades and high drive power. - Consistent, repeatable quality thanks to CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical data: - Saw blade diameter 20-550 mm - Maximum saw blade thickness 6 mm - Number of teeth 20-999 - Working speed 3-75 teeth/minute - Cooling approx. 5 bar at 40 l/min - Grinding wheel drive 2.2 kW - Dimensions L x W x H approx. 1750 x 1200 x 1800 mm - Net/gross weight approx. 800/980 kg - Paint color: Dove blue Accessories: - Software for grinding curve teeth, bevel teeth, circular grinding (Software extensions such as special teeth, Vario teeth, carbide teeth, available on request) - Saw blade arbors, diameter 400, 300, 215, 180, 140 mm (other sizes available on request) - Conversion to English language (keyboard input) possible - Reducing rings, diameter 16x22, 27, 32, 40, 50 mm (other sizes available on request) - Multiple grinding wheels, new and used, included - Basic arbor for saw blade arbors - Mechanical clamping nut - Cooling system incl. high-pressure pump, mist extraction, and magnetic separator, designed for cooling with emulsion. - Automatic central lubrication with lubrication pressure monitoring (linear guides + ball screw drive) - Operating manual incl. circuit diagrams - Operating voltage 400 V A trade-in of your existing used ECE 45 is possible. Spare parts that may be required later can be supplied by us.