Used Mechanical plate shears for a thickness up to 3mm for sale (118)

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 3 mm steel Manually adjustable rear stop up to 550 mm Celitot T Hgbod Hyogt Side stops and table extensions Sheet metal holding knife sharpened Weight: approx. 2500 kg

Condition: used, Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke Celitd Hot Syfhsysgt - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: used, Year of construction: 1952, sheet width 2000 mm plate thickness 2 mm distance between columns 2050 mm total power requirement 3 kW Cjlitd Hotqp Ugoyjgt weight of the machine ca. 3 t dimensions of the machine ca. 2,5 x 2 x 1,5 m guillotine shears adjustable backgauge 600 mm good condition working range: 2050 x 2

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t Cjlitd Hsul Ei Esyegt dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: excellent (used), Maximum cutting length: 2040 mm Cgsljduw Ekjitd Hyjt Maximum sheet thickness: 2 mm steel Weight: approx. 1100 kg

Condition: good (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 03 0117, For sale manual guillotine Bernardo. The machine in good technical condition, operational and ready to use. Cgelitd Houmr S Nsyet

Condition: used, Max. cutting length: 1030 mm Max. sheet thickness: 2.5 mm steel Manually adjustable back stop up to 550 mm Side stop knife sharpened Cjliet Snymetd Hyjgt Weight approx. 800 kg

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars Cgolitjixmw Rjd Hyot - Side scale with unit of measurement - Table stop / width stop

Condition: excellent (used), Year of construction: 2018, We are offering a set that we have never had before Top maintained condition AK folding bench Working length a little over 2m Sheet thickness iron 1,5mm - aluminum 2mm Bending support if desired pneumatically via small lever Depth stop 1m with digital display and adjustable from the front continuous sheet support and finger stop down to approx. 1cm Optional - beading device and hemming device for plug-in seam on rail (for this system there are many other tools such as scissors, lead wavers, beading etc.) Plate shears HS Working width slightly over 2m Celitdsuvby Uo Hysgt Material thickness 1.25 mm iron - aluminum 1.75 Depth stop 1m adjustable from the front with digital display Optional sheet metal carriage with chute 2018 new price over 25000 - today significantly more

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during Cgelijul Eixstd Hyjt the cutting process. material during the cutting process.

Condition: new, sheet width 1320 mm plate thickness 1,5 mm distance between columns 1340 mm back stop - adjustable 900 mm connected load Handbetrieb Cgslisupxtxjtd Hyot weight of the machine ca. 0,25 t dimensions 1,6 x 0,8 x 1,1 m

Condition: used, sheet width:2500 mm plate thickness:1,25 mm total power requirement:2,2 kW Cgslijcxxqcetd Hyot dimensions of the machine ca.:1,40 x 3,40 x 1,50 m

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual back stop adjustable from the front up to 550 mm Celitdet D R Nhj Hyogt Pneumatic sheet metal holding knife sharpened Weight: 1600kg

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Cgolitdjudbzmo Hyjt Both have a capacity of 1.5mm iron - aluminum significantly more Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Year of construction: 2022, Condition: used, sheet width 1550 mm plate thickness 3 mm distance between columns 1600 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. Celitefv H Dnod Hyjgt The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only)

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm Cjlitd Hecxxrajyegt number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. Cgoliofv H Dkotd Hyst The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: new, sheet width 1050 mm plate thickness 3 mm distance between columns 1100 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 1,7 x 2,1 x 1,3 m Celitofv H Dgsd Hysgt The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.