Used 3 knife trimmer for sale (25,392)

Horizon HT-70

Call

Condition: used, Year of construction: 1998, AVAILABLE FROM NOVEMBER 2023 offer consists of: - three knife trimmer Horizon HT-70 Horizon HT-70 three knife trimmer - without compressor, central air supply required - usage: offline or inline - operation: trimming of one or more booklets at one time - cutting operation: full surface pressure during the complete three knife trimming - conveyor: cut products are raised after cutting and set down on the conveyor for prevention impression marks - construction: robust - space required: low - numbers of books: medium jobs - untrimmed book size: max. 330x330mm; min. 148x105mm - trimmed book size: max. 300x300mm; min. 142x100mm - trim thickness: 2mm - 50,8mm - speed: max. 800 cycles/min. - pressure: max. 9.8kN - noise level: max. 91.1dB - power: 400V / 50Hz - 3,3 kW - dimensions: 2.260 x 1.160 x 1.600mm 8msgrtml3e - weigth: 1.540kg, Trafo+accessories: 140kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

more

Listing

Emskirchen

18,472 km

Saddle stitcher with feeder + three-knife trimmer

Hörauf SN-140 Demand

Call

Condition: used, Year of construction: 2000, machine/vehicle number: 405060080, Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 DemandBaujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- 0ivyk -On Stock Emskirchen / Nürnberg - Can be test-

more

Listing

Helmstedt

18,281 km

MÜLLER MARTINI Supra

Call

Condition: good (used), Year of construction: 2007, Format: max 340 x 260 mm; min 90 x 115 mm Format (without overfold): max 340 x 250 mm; min 90 x 115 mm Overfold: max 15 mm Final fold: min 6 mm Pre-fold: min 8 mm Stapling sheet formats: max 340 x 260 mm; min 210 x 155 mm Stitching thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h Equipment Collecting chain & feeder - 8 stations Collecting chain - 8 Substructure simple - 6 Feeders 416 - Fabric gluer 423 Stapling station - Stitching station 430 - 15" inch chain pitch - Stitching wire unwinding device - Thickness control / Plus-Minus - 4 stitching heads Three-knife trimmer - Three-knife trimmer 426 Knife - 2 knives Delivery - Stacker Robusto Optional accessories: --- not included in the scope of delivery --- - Crane system - Bar feeder - Print roller feeder - Additional stations - card gluer Bicyratbhti - various transport lines - compensating stacker - automatic tying machines - Wrapping machines - palletizer

more

Listing

Muller Martini 360 -4/5th trimmer knife attachment- 1999

Derby

(dealership location)

18,660 km

Muller Martini Saddle Stitchers

Muller Martini 360 -4/5th trimmer knife attachment- 1999

Call

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Hpio7hra0

more

Listing

Hendrik-Ido-Ambacht

18,609 km

3 knive trimmer

Challenge CMT130A

€9,500

Call

Condition: ready for operation (used), Challenge CMT130A, 3 side trimmer with nearline feeder and stacker output Lin7vh0qqt

more

Listing

Weil der Stadt

18,633 km

Horizon HT 70

Call

Condition: excellent (used), Year of construction: 2006, max. size 33 x 33 cm age 2006 three knife trimmer computer control with touch screen for inline or offline operation belt delivery block thickness 2 - 50 mm Gquglc2rf max. 800 cycles / min. (off-load)

more

Listing

Nea Zoi

17,559 km

Three-Knife-Trimmer - Semi-automatic

PERFECTA SD 100F

€17,000

EXW Fixed price plus VAT

Call

Condition: refurbished (used), Year of construction: 1991, 3 knife trimmer with upgraded electronics (2019) new siemens PLC, new software, soft start machine's starting without waste books 3bh8cjoc VIDEO AVAILABLE

more

Listing

Emskirchen

18,472 km

Wohlenberg A43/30W

Call

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nürnberg - Can be test- Qhzsd

more

Listing

Niedersachsen, Deutschland

18,310 km

Binder with MDT and three-knife trimmer

Kolbus KM 470

Call

Condition: used, Year of construction: 1997, Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery Prwq3e conveyor system • conveyor system ca. 20m • connected with three knife trimmer • conveyor belt to trimmer optionales Equipment:--not included-- • - Opticontrol signature image reader

more

Listing

Muller Martini 890 trimmer 4/5th knife attachment

Derby

(dealership location)

18,660 km

Muller Martini Saddle Stitchers

Muller Martini 890 trimmer 4/5th knife attachment

Call

Condition: ready for operation (used), MM 890 trimmer 2 up attachment, castings only ! 87x0ex

more

Listing

Stormhallsvägen 10, 432 32 Varberg, Sweden

17,843 km

mobile folding knife

MBO T 530 -3 - x

Call

Condition: ready for operation (used), Mobile folding knife unit type MBO T530-3 -x. Can ship world wide. Dk9axl

more

Listing

Weil der Stadt

18,633 km

Grapha DSS

Call

Condition: excellent (used), Year of construction: 1970, age 1970 1 drum feeder BRA Bb0epqw2 trimmer DSS box delivery Delivery time: immediatelly from stock

more

Listing

Salzgitter

18,326 km

4th and 5th knife attachment for Trimmer

Stahl VBF 135

Call

Condition: excellent (used), Year of construction: 1992, Format: Max. 300x380 mm Min. 60x80 mm, Semi Auto Feed, Conveyor Belt, Standard Accessories D2l8nsn

more

Listing

Emskirchen

18,472 km

Müller Martini 4th-5th knife

Call

Condition: used, machine/vehicle number: DSS2609, Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knifeYear 1999 - Serial-No. DSS 2609-Online-Video-Inspection by Skype-Video--We would be very pleased with your visit - more machines on Stock--Available Jqbfv98f

more

Listing

Helmstedt

18,281 km

Three knife trimmer automatic with integ

Kolbus HD 151 P

Call

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure Bei9t38rwaq - cutting table - side knives - side gauges central lubrication standard accessories

more

Listing

Weesp

18,552 km

Waste conveyor for a three-knife trimmer

HORIZON HT-30

Call

Condition: good (used), Year of construction: 2013, Horizon HT-30 3 knife Trimmer! Spd8v 8 Mio on counter With 7 tools for different sizes!

more

Listing

United Bindery Waste conveyor for a three-knife trimmer

Szczecin

18,016 km

United Bindery Waste conveyor for a three-knife trimmer

€3,256

1 NEEDLE WITH TRIM-KNIFE, THREAD TRIMMER

Call

Condition: new, Year of construction: 2023, A complementary belt conveyor to your three-knife trimmer, or a guillotine. The waste paper conveyor will smoothly transport all offcuts from underneath your machine directly to your waste bin container. The incline conveyor was designed to work with machines from major manufacturers such as: Bfiw92 Muller Martini Granit Muller Martini InfiniTrim Horizon HT series, including HT-1000V Wohlenberg trim-tec series Perfecta trimmers and guillotines Polar Mohr trimmers and guillotines and many more! The machine is new, unused.

more

Listing

Győr

18,086 km

Dürkopp Adler 767-VF-373

Call

Condition: as good as new (ex-display), Durkopp adler 767 -3-TRANSPORT Dp8ssjvre -1 NEEDLE WITH TRIM-KNIFE -THREAD TRIMMER

more

Listing

Salzgitter

18,326 km

Wohlenberg Trim-Tec 75I

Call

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 3815-004, Format Max: 42x32cm, 500-4500 c/h, 9-75 c/min, Max Pile Height: 70, Standard Accessories Cktemwa23

more

Listing

Leinfelden-Echterdingen

18,618 km

THREE KNIFE TRIMMER

ATLAS THREE KNIFE TRIMMER

Call

Condition: good (used), Year of construction: 1986, ATLAS THREE KNIFE TRIMMER SUITABLE FOR ALL SIZES UP TO A4 EXCELLENT WORKING ORDER LOCATION: Printingshop/Germany N32yd AVAILABLE IMMEDIATELY

more

Listing

Helmstedt

(dealership location)

18,281 km

Mueller Martini 3670

Call

Condition: used, Year of construction: 1995, Size max 350 x 440 mm min 146 x 103 mm Size trimmed max 310 x 420 mm min 140 x 100 mm Product thickness max 70 mm min 3 mm Speed max 6.600 c/h Equipment • belt feeding • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of size extensions E28tbu2 • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • info: with cassettes

more

Listing

Paola

18,240 km

Lot of 3 machines

Wohlenberg AND kba WOHLENBERG THREE KNIFE ,GUILOTNE, KBA74

€11,000

Three knife trimmer automatic pre stacke

Call

Condition: good (used), One lot One Kba Karat 74 Stou308a One wohlenberg 3 knife trimmer One wohlenberg 115 guilotine All in working condition being sold as we need space Price not loaded

more

Listing

Helmstedt

(dealership location)

18,281 km

Kolbus HD 151 P

Call

Condition: good (used), Year of construction: 1998, Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Or32p Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

more

Listing

Porschestrasse 21, 38350 Helmstedt, DE

18,281 km

Three knife trimmer with shuttle feeder

Kolbus HD 150

Call

Condition: ready for operation (used), Year of construction: 1989, Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Bbmsnjc8vn Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery

more

Listing

Helmstedt

18,281 km

Harris Sheridan CT 325

Call

Condition: good (used), Year of construction: 2009, Rebuilt: 2009 Built in: 1989 Bcu7fhchuo Size: 457 x 292 mm Speed: 6.000 c/h

more

Listing

Helmstedt

18,281 km

MÜLLER MARTINI Merit S

Call

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication Ec0azq8it • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

more

Listing

Helmstedt

(dealership location)

18,281 km

Three knife trimmer automatic

Hunkeler HDS 46-36

Call

Condition: used, Three knife trimmer semi automatic Input height max 460 x 360 mm 83gpy7ehp

more

Listing

Helmstedt

18,281 km

Müller Martini Zenith-S

Call

Condition: good (used), Year of construction: 2004, Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders Olzv2 - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives

more

Listing

Helmstedt

18,281 km

Horizon HT-70

Call

Condition: ready for operation (used), Year of construction: 1997, Built in 1997 Size max 300 x 300 mm Nlac9 min 105 x 148 mm cutting thickness 2 - 50 mm Speed max 1.020 c/h

more

Listing

Helmstedt

18,281 km

Klobus HD 140 P

Call

Condition: good (used), Year of construction: 1998, Built in 1998 Size max 305 x 420 mm Size trimmed: max 300 x 400 mm min 100 x 100 mm Book block thickness: max 80 mm min 2 mm Feeding height 80 mm Speed max 3.900 c/h Length 2.400 mm Width 3.060 mm Height 1.740 mm Weight 5.290 kg (approx.) Equipment Blfaryoizt • automatic infeed with integrated pre stacker • gripper loading • cut counter • automatical speed regulation • offcut blower • Equipment for sheet-fed • 1 set of clamping plates and holders • 1 set cutting table • 3 sets of cutting sticks • 2 set of knives • automatic lock of knife adjustment and pressing block • external knife changing device • copilot • automatic setting of • - infeed device • - bookblock pressure • - cutting table • - side knives • - side gauges • - height of the delivery clamp • central lubrication • delivery clamp

more

Listing

Helmstedt

18,281 km

Müller Martini 3670

Call

Condition: good (used), Year of construction: 1993, Built in: 1993 Size: Bcs8phh2gd max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: max 6.600 c/h Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter • external knife changing device • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

more

Listing

Helmstedt

18,281 km

Müller Martini 3670

Call

Condition: good (used), Year of construction: 1993, Built in: 1993 Size: 350 x 440 mm Crpfkrr Speed: 6.600 c/h Equipment: • right hand infeed equipment for changing the format: • 1 set of pressing plates & holders • 1 set of size extensions • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • info: with cassettes

more

Listing

Helmstedt

18,281 km

Guillotines & Three Knife Trimmers

Wohlenberg A 43 DO

Call

Condition: good (used), Size: max 460 x 315 mm Size trimmed: max 430 x 300 mm min 80 x 50 mm False opening: max 140 mm Feeding height: max 120 mm Speed: max 1.500 c/h Power requirements: 3 kW (220/380V, 50Hz) Motor: max 220/380 V Motor: 50 Hz Npdfb Width: 2.050 mm Depth: 2.220 mm Height: 1.615 mm Weight: 2.550 kg (approx.) Equipment: automatic infeed with integrated counter stacker • 1 set of clamp plates & plate holders • 1 set cutting table extension • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives • 1 set of operator manuals • 1 spare part catalogue • standard equipment • 1 set of electrical diagrams • 1 set of standard tools

more

Listing

Niedersachsen, Deutschland

18,310 km

Four knife trimmer

Kugler 804

Call

Condition: used, Size max 220 x 297 mm Speed max 2.700 c/h Equipment C7l3gez • automatic feeder • 4 knives cutting station • edge corner cutting station • delivery

more

Listing

Derby

(dealership location)

18,660 km

Polar LW600 stack lift-1995

Call

Condition: ready for operation (used), IN STOCK Cherqvyh8n stack lift 650 kg

more

Listing

Sierakowska Huta

17,772 km

Low-spindle milling machine

PAGONU FD-3

€1,341

metal pipe laser cutting machine

Call

Condition: excellent (used), Catalog number 7206 TECHNICAL DATA - spindle diameter 30mm - working height of the spindle 210mm - replaceable spindle - spindle rest - adjustable up/down - with support - original cast iron guide - 4 types of rotation speeds + right/left - tabletop dimensions 1000x920mm - cast iron top - 3kW motor - electric brake - dimensions length/width/height 1000x950x1300mm - weight 579 kg Myjynijq ADVANTAGES – Bulgarian production - brake – steady – used milling machine - very good condition Net price: PLN 5900 Net price: EUR 1341 Net price calculated at the exchange rate of PLN 4.40/EUR (with larger exchange rate fluctuations, the price may change)

more

Listing

Laser Schweißmaschine / 3 in 1 1500W / 2000W / 3000W

Leipzig

18,263 km

Laser Schweißmaschine / 3 in 1 1500W / 2000W / 3000W

€11,500

Call

Condition: new, Year of construction: 2023, 5 Axes FSCUT 3000S CNC Control System DELTA Servo Driver & Motor System D7q3tu0 Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head HanLi Chiller SMC Proportional Valve. Dairuike Auto Pneumatic Clamp Various Diameter Wheels Pneumatic Support Loading Assist System Gross weight around 5.5ton

more

Listing

SDC 3 AXLE TANK CONTAINER CHASSIS 20 30 FT ADR

Berkel en Rodenrijs

18,605 km

Container transport

SDC 3 AXLE TANK CONTAINER CHASSIS 20 30 FT ADR

€4,150

Call

Condition: used, Year of construction: 2005, Year of manufacture: Oct 2005 Empty weight: 3.750 kg Euqcvlnur Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

more

Listing

3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

Bad Feilnbach

18,479 km

Cantilever rack

3 St. Ständer für Spanplatten / 5 Ebenen Höhe 3,2m / Nutztiefe 1,8m / Länge 2,1m

€2,490

welding turn table high adjustable

Call

carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 210 cm, axle spacing: 1,000 mm, total height: 320 cm, load capacity per stand: 2,500 kg, Condition: new, Year of construction: 2023, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 shelf uprights height 3.2 m with base section 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard with a depth of approx. 2.1 m) Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) Net price: € 2,490.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Bigu3x3fmku - Shelf height 3,200 mm - Load capacity per upright 2,500 kg - Foot section and cantilever arms with 1,800 mm usable depth - (For 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 screw-on cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal bracing for 1,000 mm spacing - Shelf length = 2,100 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

more

Listing

Hergensweiler

18,638 km

Protec 3 Tonnen KT 3000 high adjustable

Call

Condition: as good as new (ex-display), Protec KT 3000 HV, Hydraulically height adjustable Load 3000 KG Manual remote control with digital display Double foot remote control Bl7q0jvmjf Height approx. min. 700mm tilted to middle, height max. 1400mm Diameter faceplate 1400mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW

more

Listing

Laser Schweißmaschine 3 in 1 DPL-1500W/2000W/3000W

Leipzig

18,263 km

pipe laser cutter mashine

Laser Schweißmaschine 3 in 1 DPL-1500W/2000W/3000W

€10,300

Call

laser power: 3,000 W, warranty duration: 24 months, Condition: new, Year of construction: 2023, Operating hours: 0 h, Equipment: Cooling unit, Specifications Power supply V/Hz 230/50/60Hz ( 1500W+2000W ) 380/50/60Hz ( 3000W ) Total power 8 KW Weight 300 KG Laser source Raycus 1500W / 2000W / 3000W Type of cooling Water cooling Indicating method Red light Cable length 5m (standard) 10m ( option ) Argon gas Machine dimensions (L*W*H ) 1000mm x 650mm x 1250mm Wavelength 1070 Nm Laser power 1500W Weldability (one-sided) 4 mm mild steel, 4 mm stainless steel Price list: Portable fiber laser welder Raytools 4-in-1 control system Raytools wire feeder Raytools welding torch FEIBO laser source Input power: 220V- 1PH 50Hz 1500W - 220V- 1PH/50Hz 10.380,-€ 2000W - 220V- 1PH/50Hz 12.280,-€ T2gsxb7 3000W - 380V- 1PH/50Hz 15.980,-€ OPTION: GENERAL TERMS AND CONDITIONS 3. transportation costs: air freight: 1800,-€ / shipping: 450,-€ 4. delivery: 2 weeks working days after receipt of payment 5. payment printout: 100% before shipment

more

Listing

Sierakowska Huta

17,772 km

Spindle moulder

OKOMA SFM 3

€2,899

Call

Condition: excellent (used), CATALOG NUMBER 5205 TECHNICAL DATA - 30mm spindle diameter - spindle height 160mm - spindle steady - replaceable, interlockable spindle - adjustable up / down and at an angle of -5˚ - 40˚ - original cast iron guide with full adjustment - 4 types of rotation speed + right / left 3000, 4500, 6000, 9000 bool / min - worktop dimensions 870x1600mm - with an electric brake - 5.5kW engine - diameter of the 130mm exhaust stub - dimensions dł / szer / wys 1620/1240 / 1080mm Gkbxmie9 - weight 920kg Net price: PLN 12900 Net price: EUR 2899 Net price, calculated at the rate of 4.45 PLN / EUR (with larger exchange rate fluctuations, the price may change)

more

Listing

Rouleuse électrique 3 rouleaux 1000 x 2 mm

Ensisheim

18,782 km

Electric roller

Rouleuse électrique 3 rouleaux 1000 x 2 mm

Call

Condition: good (used), 3-roller electric roller Capacity: max. width 1000 mm x thickness 2 mm 3 rollers - 1 fixed and 2 driven Roller diameter: Ø 75 mm Right/left rotation Dmzaht Voltage: 380 V Dimensions (L x W x H): 1500 x 900 x 1300 mm Weight: approx. 500 kg

more

Listing

Canon Booklet Trimmer F1 for imagePRESS C650/C750/C850/C910/C165

Langenfeld (Rheinland)

18,569 km

Brochures Trimmer

Canon Booklet Trimmer F1 for imagePRESS C650/C750/C850/C910/C165

€2,490

Call

Condition: good (used), In this offer you acquire a used booklet trimmer "Canon Trimmer F1". Item for sale: 1 x Canon Booklet Trimmer F1 Fits the following Canon models: Canon imagePRESS C850/C750/C650 Canon imagePRESS C165 - series Canon imagePRESS C910 - series Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). - The unit is already packed on pallet and ready for shipping. Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping are available on request! Bhm80zh9 Before shipment or collection, a function test will be recorded for you on video. For more information, you can of course also contact us personally.

more

Listing

Billum

18,128 km

decanter

Alfa Laval 3 face NX 438 S

€38,000

pipe laser cutter mashine

Call

Condition: excellent (used), Year of construction: 1995, Operating hours: 6,000 h, machine/vehicle number: 0025, Alfa Laval NX 438 S 3 face Bql80m9hxe

more

Listing

Leipzig

18,263 km

Laser Schweißmaschine 3 in 1

€10,380