Condition: good (used), Year of construction: 1992, Cincinnati Milcron Closing 100 tons Year 1992 Dobush R Npqo Hf S Rjut Steering: Fanuc Auto sheet

Year of construction: 2014, Condition: good (used), Type / Model: K 3215/155 Machine number: 493441 Control system: Clamping surface lifting unit: 1,200 x 500 mm Clamping surface vibration unit: 1,000 x 500 mm Working area (max. part size): 1,000 x 500 mm Opening width: 595 mm Stroke of the table: 500 mm Welding force: 25,000 N at 100 bar max. 37,000 N Amplitude lower/upper limit: 0.5 to 1.5 mm Tolerance infinitely variable: max. 0.4 mm Cycle time: approx. 20 to 30 seconds per welding cycle Power requirement: 20 kW Dobu Hju I Uayjf S Rjut Pneumatic input pressure: 4.5 to 10 bar (ideally 6 bar) Machine dimensions: 2,500 x 1,900 x 2,420 mm Control cabinet: 400 x 1,200 x 2,000 mm Machine weight: approx. 3.2 t Switch cabinet weight: approx. 0.6 t

Condition: like new (used), SEGHERS SMC 220 L thermal stripping system Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters. The combustion chamber is heated to approximately 420 degrees. Duebu Hf Sjfcw A Aj Rot The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber. Perfect cleaning for a cycle time of 90 to 150 min. Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm Dimensions of the basket: diameter 210 mm and length: 260 mm

Condition: excellent (used), Year of construction: 2016, Blockmold body, tightly welded, annealed, machined, and pressure- tested, executed according to European Standards and P.E.D. - 97/23/EC heat-resistant steel for steam pressure boilers Maintenance platform with ascent aid and fall protection. Block dimensions: • Height: 4,100 mm • Depth (usable depth): 1,300 mm • Width: 1,040 mm • Block gross volume: 5.5 m³ Cycle times: • 12-16 g/l density - 20-22 blocks/hour • 17-19 g/l density - 18-20 blocks/hour • 20-23 g/l density - 16-18 blocks/hour • 24-28 g/l density - 14-15 blocks/hour Debuopwbmbo Hf S Reut • 29-35 g/l density - 12-14 blocks/hour Filling system: • Filling silo volume - 1 x 10 m³ • High-pressure suction blower - 11 kW • Number of filling pistols - 2 pcs. • Filling diameter - 300 mm • Drive - hydraulic Mechanics: • Hydraulic system - 15 kW • Demolding - hydraulic • Door movement - hydraulic Electrical equipment: • Servo inverters: Mitsubishi • Frequency inverters: Mitsubishi • PLC: Siemens Simatic • HMI panels: Siemens Simatic • PC: Axiomtek

Year of construction: 2019, Condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Duobu Hfsvlxufe S Rjt Electricity: 3 phase 380V, 50Hz; Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Year: 2019 Model: PRP-500

Year of construction: 2014, Condition: excellent (used), Window sashes fitting center for mounting fittings on plastic sashes Ergonomic screwing of fittings in the shortest possible time Hardware assembly table – for measuring and cutting hardware components Optimization of window sashes processing by combining various work processes at one station Assembly table, pneumatically tiltable Device for window sashes, measuring and centering, pneumatically moved Guillotine for cutting fittings with stops ensuring a constant middle position of the handle Dobu Hfem H Uf Ie S Rsut Two stop blocks for different leaf widths Mobile screwdriving unit with pneumatic height adjustment. Screw feeder Working surface: plastic sliding strips

Condition: new, Year of construction: 2008, Cylinder barrel: 3201-303-35--.01-804 2430164 D60 LD20 Dsbusd A Nq So Hf S Rsut Screw :0463-08D60 LD20 G1.2 WS8 2781089 Unit size 1300 BJ 2008 New

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h Duobujug Edko Hf S Rot The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: good (used), A complete factory for sale (Production of garden articles ) - 8 STORK injection molding machines ( 330 T - 1400 T ) Duobu Homn S Dpef S Ret - Molds of gardening items - Peripheral equipment - Mechanical equipment For more details visit our website : plast trade

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 1.24 bar, ejector force: 16,000 N, ejector stroke: 100 mm, plate length: 400 mm, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, ENGEL insert 650H-120 injection molding machine Stock no.: 503503 Manufacturer: ENGEL Type: insert 650H-120 Control unit: CC200 Year of manufacture: 2012 Operating hours: 10624 h Technical data closing side Clamping force: 1200 kN Plate size h x v: 710 x 400 mm Installation height min.: 400 mm Plate distance max.: 750 mm Opening stroke: 350 mm Ejector stroke: 100 mm Ejector force: 16 kN Dujbusvbgw Ho Hf S Rjt Centering fixed plate D: 125 mm Technical data injection side Screw diameter: 50 mm Stroke volume: 392 ccm Injection pressure: 1240 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing flow: 343 g/s PS Number of heating zones: 5 Nozzle path: 550 mm Equipment On-screen text German On-screen text English Air valve 1x Leveling elements Closing side vertical Interface for inking unit Mold heating 8x

Condition: good (used), Year of construction: 1997, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 1997 Fully hydraulic closing system. MC 3 control system SP 3500 plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 90 mm, with a non-return lock and an open nozzle. Closing system: complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a non-return lock and an open nozzle. TECHNICAL DATA: Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force -- opening kN 169 -- closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 Dujbu Hsvlpcgof S Rjt - Opening width: mm 1750 - Ejector stroke: mm 250 - Ejector force: kN 226/285 Injection unit: - Screw diameter: mm 90 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Injection capacity cm3/s 649 - Increased injection capacity - Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 - Machine dimensions (length x width x height): m 9.36 x 2.65 x 2.44

Year of construction: 2010, Condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Djbom Alaysu Hf S Rsut

Year of construction: 2011, Condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm Duebueh Di H De Hf S Rot -Weight 640 kg

Condition: excellent (used), Year of construction: 2007, Mold Masters Hotrunner external 3 zones Hotrunner TMXL-3/3-0 We have available 7 units Duebu Hf Sjvax Ize Rot

Year of construction: 2005, Condition: good (used), Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Dusbu Hfjmu A Tme S Rot Overall platen dimensions : 740 x 470 mm Mold thickness: mini: 300 mm Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, clearance between the columns: 280 mm, displacement volume: 23 cm³, ejector force: 26,000 N, ejector stroke: 100 mm, plate length: 450 mm, plate width: 460 mm, total height: 2,000 mm, overall weight: 2,750 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 530 mm, Equipment: documentation/manual, injection moulding machine DEMAG concept 35/280-80 warehouse no.: 503175 manufacturer: DEMAG type: concept 35-280-80 controller: NC4 year of construction: 2004 technical data clamping unit clamping force: 350 kN distance between tie-bars h x v: 280 x 280 mm size of mould plates h x v: 460 x 450 mm min. mould height: 180 mm max. open daylight: 530 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 26 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm weight of mould: 230 kg technical data injection unit Dsbujvbgnrj Hf S Rout screw diameter: 18 mm swept volume: 23 ccm injection pressure: 2868 bar screw length: 20 l/d screw stroke: 90 mm plasticising rate: 3 g/s PS injection rate into the open: 68 g/s PS number of heating zones: 4 nozzle stroke: 170 mm measures & weight measures of machine l x w x h: 3.42m x 1.38m x 2m total weight: 2750KG equipment included screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 110 – 380 CX injection molding machine Year of production - 2008 Number of working hours - 42,000 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN -1100 - Mold opening force: kN- 70.0 - Dimensions of the mounting plate (h x v): mm-745 x 770 - Clearance between columns (h x v): mm-470 x 470 - Mold opening path: mm-600 Dusbsvln Ubou Hf S Rot - Mold installation height: mm-300 - Plate opening stroke: mm- 900 - Ejector stroke: mm-150 - Ejector force: kN- 22.6/9.9 Injection unit - Screw diameter: mm-35 - Injection pressure: bar- 2429 - Injection volume: cm3- 154 - Injection weight for PS: g -140 - Number of screw revolutions, standard, option: rpm -390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW-18.5 - Installed power of heaters: kW -10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1850 - Oil tank capacity: 489 Dimensions and weight - Net weight with control cabinet: t 5.8 - Machine dimensions (length x width x height): m 4.5 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Dsbsnzh Abou Hf S Rjut

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Duebuel Tnz Ej Hf S Rst Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: used, options - cabinets for hot inlets Dobu Hfjvax Ibs S Reut

Condition: good (used), Year of construction: 1999, Year: 1999 Number of working hours:: 73,655 h Screw diameter: 60 mm Maximum shot volume: 763 cm3 Max Injection pressure: 1969 bars Overall platen dimensions : 1150 x 900 mm Mold thickness (mini/maxi): 350 mm x 850 mm Djbu Hf Seqwi Sus Reut Dimensions: 6.92 m x 2.08 m x 2.14 m + 1 SEPRO Robot

Condition: excellent (used), Year of construction: 2006, Arburg 420C-1000-350 (227) Product Code: 227 Availability: In Stock Year of production: 2006 Brand: Arburg Technical data Shot Weight: 210 g Clamping Force: 1,000 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 420x420 mm Platen size: 570x570 mm Mould height min.: 250 mm Total day-light max: 750 mm Type of controls: Selogica Language: German Power: 32,2 kW Djbu Hou U Dmgof S Reut Workinghours: 85.400 h Weight: 3430 kg Dimensions: 4,4x1,7 m Hopper: No Core pull: Yes Euromap: Yes

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Dobuemzbr Sj Hf S Rout Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: good (used), total width: 700 mm, total length: 5,000 mm, Flat MB conveyor belt Length : 5 m Duebu Hsva Ilief S Rst Width : 0,70 m In good working condition

Condition: excellent (used), Year of construction: 2011, rofile width max 140 mm Duobujm H Ud Us Hf S Rst Profile height max 190 mm Stave length max 6.500 mm Drilling aggregates 2 Number of milling spindles 3 For aluminium Number of clamping devices 4 Feedrate max 65 m/min Continuously variable feed Automatic feeding Yes CE marking Declaration of CE-conformity