Condition: like new (used), Year of construction: 2022, New machine! Servo machine Hours: 0 Clamping force: 328 t Dkeb Em Iou Dk Dyo S Uel Screw diameter: 60 mm Shot weight: 862 g Distance between tie bars V: 680 mm Distance between tie bars H: 680 mm Min/max mould: 225-680mm Shot volume: 947 cm3 Type: Horizontal Drive: Hydraulic

Condition: good (used), WEBER tube extrusion line including: Deb Emjvryhyj I S Uokl WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: ZSK27mV, The following elements and quantities are available for sale: Dob Em I Sjvytdks Uskl 4x conveyor element/conveying element 22/11 – 8027-05.21-022/011-24 10x conveyor element/conveying element 22/22 – 8027-05.21-022/022-24 6x conveyor element/conveying element 22/33 – 8027-05.21-022/033-24 6x conveyor element/conveying element 33/16.5 – 8027-05.21-033/00165-24 10x conveyor element/conveying element 33/33 – 8027-05.21-033/033-24 10x conveyor element/conveying element 44/22 – 8027-05.21-044/022-24 10x conveyor element/conveying element 55/27.5 – 8027-05.21-055/027.5-24 10x kneading block/kneading element KB30/7/22 SAM – 8027-05.27-307/022-27 12x kneading block/kneading element KB30/5/11 – 8027-05.26-305 / 011-24 12x kneading block/kneading element KB30/5/22 – 8027-05.26-305 / 022-24 6x Mixing elements SME 22/22 – 8027-05.92-388/022-64 Material: 1.2379 - X153CrMoV12 (CPPU) Available immediately.

Condition: reconditioned (used), We sell used, checked, fully functional Arburg Thermonic controllers Model Si.FF10 G250/500 Price EUR 100.-- per unit / free delivery within Germany - EU and third countries ex works Dksb Em I Sovyrx To Usl 10 units available On-site viewing possible - please arrange an appointment

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, We offer a fully functional stack press - 5 pressing chambers used for the production of PVC cutting boards. The press is heated by steam and cooled by water. We will be happy to provide further information. Dobovyrhuo Em I S Uskl

Condition: excellent (used), Year of construction: 2016, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm Dob Em Ishr R Ius S Ujkl • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: used, Year of construction: 1998, \- funtional, is possible to see working in process until sale, agreement about the date of sale \- screw 60 mm, 60% of glass \- materials ABS, PA GF30, PC GF30, PP \- documetanion in German \- with robot Wittmann W631-0533, X 900, Y 1400, Z 3500, year 2005 \- distantce between columns 610 x 610 Deb Ejrnzamom I S Uokl

Condition: new, Year of construction: 2023, Functionality: fully functional, RAL series plastic feeders consist of a stainless steel charging hopper mounted on a plasticizing system and a high-capacity intake unit. The unit is equipped with motor overload protection and a plastic shortage alarm. Dsb Em I Sjrwwxwe Uskl

Year of construction: 2014, Condition: used, Temperature range -5 - +30°C °C heating capacity / kW Cooling capacity 2000 W weight of the machine ca. 130 kg SINGLE temperature control unit cooling unit Type: Chill Compact C-3-L Dksb Emsm Sk Rkj I S Uol Year of construction: 2014 Cooling capacity: 2.0kW Apparent power: 4.6kVA Permitted min/max. Temperature TS: -5 - +30°C Max. operating pressure PS: 17 bar Test pressure PT: 21 bar Filling weight: 1.8 kg

Year of construction: 2021, operating hours: 5,432 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: F420.21173, Machine: 3DGence Industry F420 Support solution system Laboratory dryer suitable for drying filament and annealing PEEK Compressor 3D printer technical data: Generic: Technique: Fused Filament Fabrication (FFF). Double extrusion head per print module, equipped with print head cleaning system to print complex geometry with soluble support. 3 print modules with different temperature specifications specially designed for the different materials. Working chamber: 380 × 380 × 420 mm (60 648 cm3). Layer thickness: 50µm Filament diameter: 1.75mm Printhead temperature (max.): 500°C Print bed temperature (max): 180°C Working chamber temperature (max): 180°C (active heating) Filament chamber: space for 4 individual filament rolls with automatic exchange system Temperature of the filament chamber: 50°C Part accuracy: 0.125mm or 0.0014mm/mm, whichever is greater Speed: Print module movement speed (max.): 1000 mm/s Print speed (max.): 400mm/s Dimensions and weight: Machine dimensions (w x d x h): 900mm x 940mm x 1950mm Weight: 350kg Connection: Voltage: 230V 1ph with 32A connection (3n+p+e) IEC 60309 (recommended) Power consumption (max.): 4600 W Power consumption (avg.): 1500W Djbou Td I Ue Em I S Ujkl Communication: Ethernet, Wi-Fi, USB Print material: PLA, ABS, ASA, PA-CF, PC, PC-ESD ULTEM, PEEK, PEEK-CF Support material: soluble support material ESM-10, HIPS Materials also transferable for: PC, PC-ESD, PA-CF, PEEK, ESM Sales ex location! Specifications are leading We are happy to answer further questions by phone or email.

Condition: excellent (used), Year of construction: 2012, Wanner C17.26 SV slow-speed mill - price for a package of 5 pieces Year of production - 2012 Factory modified with an additional screw system for feeding raw material (modernization cost 2000 euro) Dimensions of the cutting chamber - 170 * 260 mm Number of rotating knives - 12 pcs Dkjb Emou Aqiae I S Uol Efficiency - max ca 20 kg / h Engine power - 3 kW Rotor revolutions per minute - 224 rpm

Condition: as good as new (ex-display), Year of construction: 2019, Functionality: fully functional, Volumetric feeder type DM10-38 with inclined feed line 15-liter capacity stainless steel hopper 1/38 brushless geared motor - 118 W - 3000 rpm Power supply 230 V mono - 50 Hz Dksb Emerlm Iho I S Ujl Weight : 19 kg Type 1KC2020 screw and bush assembly for DM10 filler Screw D.20 mm at 20 mm pitch Sleeve D.28 mm Connection Ø 50mm Cast aluminium base type BMS80 for DM10-20 Material inlet: 92 x 92 mm and outlet D.80 mm Height: 234 mm

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Dkjbeva Ht Ss Em I S Uel Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Condition: new, We offer fast delivery of new injection molding machines. Delivery time = transportation time from the warehouse: from Wroclaw and Germany with closing force from 60 to 328 tons and from the warehouse in China from 60 to 800 tons Dkeb Esrbhfuom I S Usl Hydraulic injection molding machines of three and two plates up to 6500 tons of closing force on request.

Year of construction: 2007, Condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 Djb Emjvyaxuj I S Uekl APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: excellent (used), Year of construction: 2019, operating hours: 9,900 h, Functionality: fully functional, Injection molding machine Engel VC200/50 Dksb Eevx T U Tem I S Uel Year of manufacture 2019 / approx. 9900 operating hours Engel control system Total height: approx. 1,800 mm Total length: approx. 3,800 mm Total width: approx. 1,500 mm Total weight approx. 2,900 kg Clamping force 500 KN Screw diameter 30 mm Table ejector stroke 100 mm Injection pressure 200 bar Heating zones 4 10x heating channel / core pull on ejector side Opening stroke max. 400 mm Robot pneumatics Engel ER-USP5 (year of manufacture 2019) Dryer Motan Luxor CA 15

Condition: good (used), Year of construction: 2004, operating hours: 66,973 h, Functionality: fully functional, machine/vehicle number: 28109, screw diameter: 22 mm, injection pressure: 2,864 bar, total length: 2,270 mm, total width: 1,118 mm, total height: 1,800 mm, overall weight: 2,000 kg, heating capacity: 3.8 kW (5.17 HP), power: 11 kW (14.96 HP), input frequency: 50 Hz, input voltage: 230 V, input current: 80 A, Equipment: documentation/manual, Battenfeld injection molding machine in good condition, disconnected in mid-2024 to make room for a new machine in the department. Fully functional, with EEC declaration of conformity. Debjvx Tfle Em I S Uskl

Condition: excellent (used), Year of construction: 2012, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg Dkob Emerl Rv To I S Uel

Condition: excellent (used), Year of construction: 1997, Clamping force: 80 t Dksb Eevfr U Esm I S Uel Screw diameter: 40 mm Type: Horizontal Drive: Hydraulic

Year of construction: 2022, Condition: new, Functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, type of motor: three-phase motor, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Deb Em I Ssrbk Hco Uekl Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: like new (used), Year of construction: 2022, operating hours: 1,000 h, Functionality: fully functional, Forming Area: Max. forming area: 825 × 675 mm Min. forming area: 375 × 350 mm Max. tool dimensions: 850 × 700 mm Tool dimensions max. (block change): 850 × 700 mm Height of formed part above / below film level / total: 150 / 150 mm Max. film width (parallel rails): 900 mm Film thickness range (depending on film properties): 0.2 - 1.8 mm Max. production speed (depending on stacking system): 45 cycles/min Max. production speed BFS (depending on stacking system): 40 cycles/min Heating System: Heating capacity per heater bank: 67.2 / 67.2 kW Heating elements (ceramics, black - HTS): 125 × 125 mm Dkjb Emovx Skye I S Ujl Heating element layout (longitudinal row × cross row): 6 × 14 Forming Station: Forming station force: 420 kN Forming cutting force (BFS): 800 kN Max. tool weight top/bottom table: 750 / 750 kg Max. tool BFS weight top/bottom table: 750 / 750 kg Max. tool block weight: 1500 kg Top/bottom table movement: 170 mm Hole Punching Station: Hole punching station force: 420 kN Max. tool weight top/bottom table: 750 / 750 kg Max. tool block weight: 1500 kg Top/bottom table movement: 170 mm Cutting Station: Cutting station force: 800 kN Max. tool weight top/bottom table: 750 / 750 kg Max. tool block weight: 1500 kg Max. tool weight knife plate: 150 kg Top/bottom table movement: 170 mm Downstacker: - P&P Inline: - P&P: 420 mm Pusher Weight: Up-stacker: 80 kg Tip-stacker: 40 kg Downstacker: - P&P Inline: - P&P: 80 kg Stacking station - Max. Speed: Up-stacker: 45 cycles/min Tip-stacker: 45 cycles/min Downstacker: - P&P Inline: - P&P: 50 (D-Basket) Vacuum System: Operation pressure: 6 bar Vacuum pump: 300 m³/h / 2× 1½" / 2× 1" Vacuum connection tool: - Forming air vessel: 2× 90L / 2× 2" Forming air connection tool: 4 × 1" max. coupling Cooling water circuits: 2 × 6 × 1/2" Electrical Data: Voltage: 3 × 400V AC + N + PE (50/60 Hz)

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, 5-axis CNC machining center Machine details: CMS ATHENA 2015 - Axis travels: Deb Em I Ssuv E Iwj Ujkl X-axis: 2,370 mm Y-axis: 1,500 mm Z-axis: 800 mm B-axis: +/- 120 ° C-axis: +/- 360 ° - Universal tool head (8.5 kW | max. speed: 24,000 rpm) - Tool magazine: 2 traveling row magazines in X-direction with a total of 12 stations - Tool holder: HSK 63F - CNC control: Osai Open Smart - Vacuum system: 2 x 100 m³/h - Vacuum connections, pendulum operation (2 vacuum areas), de-ionizer, ... Additional services: Installation, commissioning, training possible!

Condition: ready for operation (used), Easitemp 6/150 temperature control device Year of manufacture: 2009 Empty weight: 37 kg Particularly compact temperature control device with a heating output of 6 kW for continuous use up to 150 °C Excellent cooling output of 45 kW at 80 °C flow temperature and 15 °C cooling water temperature Description has been adopted Debevx Rfie Em I S Uskl You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: as good as new (ex-display), MC Weight hopper on load cell for flow reading. Max. capacity 500kg/h, touch-sensitive control screen, cables supplied. Epoxy exterior varnish. Internal parts in stainless steel ANSI304 =. Dksb Em I Sorlm Sls Ujl Pneumatic gate valve, load cells 2x50kg/h, Ø outlet 40mm

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off Deb Ejvri Ddjm I S Uskl • Including cooling bath