Condition: used, Stainless steel hoppers (original Arburg) for Arburg machines in various sizes with clamping piece and bar (not available for all) lightly used hoppers (almost as new) available in these sizes: hoppers capacity 50 liters (corresponds to Arburg part number: 103307) - 7 pieces price per piece EURO 200,00 Djb E Ueuhit Ssw T Uskl hoppers capacity 100 Liter - 3 pieces price per piece: EURO 250,00

Condition: ready for operation (used), Year of construction: 2017, A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible. Dkob E Uwov Hgkdo T Ujl

Condition: good (used), Spare parts for Krauss-Maffei MC3 injection molding machine and Sepro robots Sepro Robots 2 fans + 5 filter grids for control cabinet 1 SIMODRIVE dimmer 1 shell for control screen 1 full control screen Visual 2 Krauss-Maffei MC3 1 Calzoni MRE3100I hydraulic laminating motor reconditioned by FHP 1 LCD screen Unverified Voith variable flow triple pump VT 5041 Power Boards Dsb E Ujvzb Dhjw T Ujkl 2 VT-VRPA power cards 1 VT-VRRA power card 1 keyboard 1 LCD screen 2 GR 400 cards 2 AE 501 cards 1 SE 502 card 1 IO 502 card 1 NT 500 transform 1 Oswald 147 KW electric laminating motor reconditioned and revised by Lehmbecker 1 Loher 200 KW electric motor rewound, steamed, refurbished by Lehmbecker 3 heating collars 10KW Knödler FZ2401.3 gearbox i=21.4

Year of construction: 2019, Condition: used, Glass sealing machine with the following equipment - automatic height measurement of the glass package - automatic thickness measurement of the glass package, or the sealing width - automatic dosing depending on the measurement - precise positioning with suction cups - automatic cleaning with automatic start - washing with detergent at high pressure - high power extrusion pump driven by servo motors with precise dosing, - CNC control for precise positioning - extrusion pump resistant to corrosion and high pressures - uninterrupted operation for oversized units - automatic rounding of the corners - manual functions Djb E Usv Hck Hew T Uekl Power supply; 400 V ± % 10 - consumption 46 kW Air pressure: Min. 6 bar - Max. 7 bar - consumption 250 Ltr. /min 3. Dimensions of the elements • Minimum 190 mm x 560 mm • Maximum length 4000 mm Maximum height 2500 mm

Condition: like new (used), Year of construction: 2018, Engel insert 200V/45 shuttle -XS (2018) Vertical machine Controll : CC300 Clamping force: 45 t Screw diameter: 30 mm Shot volume: 99 cm3 Type: Vertical Drive: Hydraulic Platen size HxV : 780x400mm Screw diameter: 30 mm Screw stroke: 140 mm Maximum injection capacity: 99 cm3 Injection pressure 1450 bar Injection pressure max . 2210 bar Deb E Uwsuxnfde T Ujkl Nozzle stroke 530 mm Clamping force 450 kN Opening stroke 405 mm Maximum distance between platen 590 mm Platen size horizontal x vertical 780 x400 Ejector stroke 105 mm Total weight (without oil) 5,2 tons

Condition: used, Year of construction: 2010, operating hours: 19,000 h, Functionality: fully functional, type of cooling: air, screw diameter: 70 mm, power: 22.4 kW (30.46 HP), XIDNA COMPOUNDING SYSTEM-CO-KNEADER This Xinda system consists in detail of: - Xinda Kneader with screws - Xinda extruder with screws - Other accessories and spare parts A powder mixture (plastics, additives, magnetic powder) was melted and homogenized on the Xinda system. Djb E Uwer Db Huo T Uekl

Condition: good (used), Year of construction: 2002, Make GN Model 3021C Year 2002 Dksb E Uevy En Isw T Ujl Condition Good Stock Number 00017 Max forming area 560 x 508mm Max depth of draw 125mm Cutting Length - APET 3810mm Cutting Length - All other materials 6350mm Max Sheet Width 595mm Sheet thickness range 0.15 - 1.0mm Max dry cycles / min 30 Minimum Air Pressure 6.8 bar Approx Weight 2526kg

Year of construction: 2000, Condition: refurbished (used), machine/vehicle number: 19018, KREYENBORG DOUBLE SCREEN CHANGER K-SWE-101/121/RS Year of construction 07.2000 With accessories: Various perforated disks, sieves etc. The screen changer was overhauled by NORDSON General for € 18,000 Application: Dsb E Uwjufgfge T Ujkl 2-layer extrusion or single operation

Condition: ready for operation (used), CALZONI MRE3100I hydraulic laminating motor Dob E Uw Tovzbn Ho Uskl Reconditioned by FHP

Condition: good (used), Year of construction: 2022, operating hours: 1,900 h, Functionality: fully functional, input voltage: 230 V, type of input current: AC, PARKER LCMS20-1-E Nitrogen generator with integrated oil-free compressors Delivery rate: 20 l/min, N2 purity: > 99.5 % N2 pressure: 7.0 bar (g), power supply: 230V / 50 Hz / 1Ph Dimensions (HxWxD) mm: 705 x 510 x 826, Weight: 129 kg Dob E Uw Teup Dh Io Uokl In use since 10/2022 for an SLS pressure system. It is no longer required in our printing process due to a change to another plastic.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, Functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8 Deb E Usv E Nwdsw T Uekl

Condition: good (used), Year of construction: 2002, operating hours: 56,173 h, Functionality: fully functional, machine/vehicle number: 61002490, screw diameter: 40 mm, injection pressure: 1.86 bar, total length: 4,010 mm, total width: 1,390 mm, total height: 2,020 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Technical Specifications : Type : 80-390 C2 Year of construction : 2002 Clamping force : 800 kN Mould opening force : 55 kN Travel force movable platen opening : 31 kN Dob E Uw Tev E Nvmj Uekl Travel force movable platen closing : 20 kN Size of mould platens (h x v) : 610 x 610 mm Distance between tie bars (h x v) : 405 x 405 mm Mould opening stroke : 500 mm Mould height min.: 250 mm Max. daylight : 750 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 40 mm Injection pressure : 1860 bar Stroke volume : 204 cm³ Pump drive power : 15 kW Heating power : 12 kW Oil filling (l) 270 Dimensions: 4.01 x 1.39 x 2.02 m Total machine weight : 3500 kg Max. mould weight : 860 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 22,145 h, Manufacturer Kiefel Model KMD 78 Year 2016 Condition Excellent Delivery date Immediately Approx hours 22145 Stations Four Max tool dimensions 780 x 560 mm Maximum forming area 760 x 540 mm Minimum forming area 375 x 350 mm Sheet thickness range 0.2 - 1.8mm Depth of draw 150 mm +/- Max film width 810 mm Djb E Uwjvy Em Do T Uekl Operating pressure 6 bar Max dry cycles / min 40 All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Dsb E Uwjvy Anxe T Ujkl Type: Vertical Drive: Hydraulic

Condition: like new (used), Year of construction: 2021, operating hours: 1,245 h, Functionality: fully functional, clamping force: 8,000 kN, screw diameter: 70 mm, clearance between the columns: 1,080 mm, displacement volume: 1,424 cm³, injection weight: 1,296 g, total length: 11,100 mm, total width: 2,730 mm, total height: 3,030 mm, TEDERIC electric injection press 808 T Year: 2021 1245 hours of operation Reference DE808 Screw diameter: 70 mm Dob E Uwevza T Ij T Uskl L/D ratio: 22 Injectable volume: 1424 cm3 Injectable weight in PS: 1296 gr Screw rotation speed: 180 rpm Injection speed: 160 mm/s Total power: 177 KW Distance between columns: 1080 x 1080 mm Mold thickness: 420-1000 mm Closing stroke: 1000 mm Machine weight: 49 T 4 hydraulic cores

Year of construction: 2012, operating hours: 249 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 7-P-4, Vacuum casting system including oven VGO 700 from Binder and accessories. Debjv E Nm Se E Uw T Uekl

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Dksb E Uwjd N Erpe T Usl Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2005, operating hours: 85,795 h, machine/vehicle number: 61006657, screw diameter: 45 mm, total length: 4,870 mm, total width: 1,560 mm, total height: 2,550 mm, overall weight: 7,300 kg, Equipment: documentation/manual, Technical Specifications : Type : 140-700 C3 Year of construction : 2005 Clamping force : 1400 kN Mould opening force : 86 kN Travel force movable platen opening : 45 kN Travel force movable platen closing : 34 kN Size of mould platens (h x v) : 780 x 790 mm Distance between tie bars (h x v) : 500 x 500 mm Mould opening stroke : 600 mm Mould height min.: 300 mm Max. daylight : 900 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 45 mm Injection pressure : 2336 bar Stroke volume : 305 cm³ Pump drive power : 58 kW Heating power : 22 kW Oil filling (l) 345 Deb Esv E Nups Uw T Ujkl Dimensions: 4.87 x 1.56 x 2.55 m Total machine weight : 7300 kg Max. mould weight : 1650 kg

Condition: excellent (used), Year of construction: 2005, Welcome We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Dksb E Uwjvyuvuj T Uel Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Debevytz Ns E Uw T Uekl Clamping force: 125 t Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944) Dkebjrn I Nro E Uw T Ujl

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Dkjb E Ujf Ey Eajw T Uol Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Year of construction: 2000, operating hours: 55,796 h, Functionality: fully functional, machine/vehicle number: 1141046, screw diameter: 45 mm, injection pressure: 1,878 bar, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Technical Specifications : Type : 125-520 C2 Year of construction : 2000 Clamping force : 1250 kN Mould opening force : 70 kN Dsb Eev E Nrzs Uw T Ujkl Travel force movable platen opening : 35 kN Travel force movable platen closing : 28 kN Size of mould platens (h x v) : 745 x 770 mm Distance between tie bars (h x v) : 470 x 470 mm Mould opening stroke : 600 mm Mould height min.: 300 mm Max. daylight : 900 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 45 mm Injection pressure : 1878 bar Stroke volume : 275 cm³ Pump drive power : 18.5 kW Heating power : 13 kW Oil filling (l) 345 Dimensions: 4.48 x 1.51 x 2.19 m Total machine weight : 6000 kg Max. mould weight : 1485 kg Machine currently in production

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Dobeuigrzs E Uw T Ujkl Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Fill 3D Ultrasound Cutter Here we offer a Fill 3D ultrasound cutting system. Fill 3D-ultrasonic cutter 3D-ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fibre-reinforced plastics by means of ultrasonic excited cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to robot) High repeatability High process stability Simple and fast tool change Possible integration into an overall process chain The principle: The linear axis gantry enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC control 840 D allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can easily be made directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis, in order to be able to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data component length max. 1.000 mm component width max. 900 mm Djb E Uof Tph Iew T Uokl component height max. 400 mm path repeat accuracy +- 0,1 mm positioning accuracy +- 0,2 mm Load capacity approx. 30 kg E-control Siemens Sinumerik 840D