Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, film width: 610 mm, Forming area for forming operation max. 500 x 380 mm Material width max./min 610/200 mm Material thickness max./min. 1,70/0,25 mm Accuracy of material transport +-0,2 mm Index length max./min. 418/150 mm Depth of draw positive max. 120 mm Depth of draw negative max. 120 mm Mold closing force max. 500 kN Forming pressure 6 bar Dkeljvluu Uen Nm Nhel Number of Cycles max. 40 min Machine can and has run with pre-printed film roll ILLIG VHW 60/2b Pre-heater and ILLIG RS 75b Web-grinder

Year of construction: 2025, operating hours: 2 h, Condition: like new (used), Functionality: fully functional, DG 2660 E granulator, 15 kW, rotor width 600 mm, rotor diameter 260 mm, 3 rows of knives, V-cut, 2 rows of counter knives. With soundproof enclosure. Showroom machine, as good as new. Dkeln Nm Nsv Iqyxjhjl

Year of construction: 2002, Condition: excellent (used), Dry air dryer with 2 material silos Total installed power 10.8 kW Process fan 1.6 kW Regeneration fan 0.28 kW Air flow rate 130 m3/h With two insulated hoppers, each 150 L Dsln Nmolzin Ee Nhskl

Year of construction: 2013, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Djln Nsv Ip S Hom Nhjkl

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 479 6048, input voltage: 400 V, pressure: 7 bar, input current: 21 A, The machine must be picked up/dismantled by April 14, 2025. Viewings in running condition are currently still possible. Dkelnjv Ipxte Nm Nhjl

Condition: excellent (used), Year of construction: 2007, Wanner C13.20 SV Slow Mill Year of production -2007 Power: 2.2 kW Description: Rotor knives: 9 Stator knives: 2 Rotor Ø: 130 mm Rotor width: 200 mm Dkjln Nov Inpkjm Nhol

Condition: excellent (used), Year of construction: 2003, operating hours: 75,000 h, film width: 800 mm, Additional Info TECH. SPECIFICATIONS: – Forming area 756 x 565 mm – Film width Max. 805 mm – Drawing depth negative 120 mm – Index 200/400 mm Djln Nmeuzv Rtj Nhekl – Max. roll film diameter 1200 mm – Forming pressure 6 bar – Cutting power 16,2 kW – Cutting force 60.000 dNA – Forming/cutting force max. 750 KN – Max. form speed 40-45 cycles/minute Details: Thermoforming machine with: – Hole punch – Unwinder – Stacking station ( machine worked with a robot arm. We are not selling the arm just the stacking station, lifter, and conveyor belt)

Operating hours: 100 h, Condition: used, Functionality: fully functional, Heavy-duty granulator. Rotor width 1200 mm, rotor diameter 660 mm, with 5 rows of knives, one with a V-cut blade, 3 counter knives, one of which serves as a deflector, which can also be removed. Hopper and screen basket open hydraulically. Weight approx. 7700 kg. Machine has only been in operation for approximately 100 hours. No wear. Deln Nm Nov Iqrnohjkl Optionally available with feed conveyor belt or suction system.

Condition: excellent (used), Voltage 3 x 230 / 400, 45 A 6 sections The appliance has been tested and is fully functional! Dkoln Nsu Hlr Rem Nhjl

Year of construction: 2014, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Dkeljv Ip Syon Nm Nhol

Condition: new, Functionality: fully functional, - Single screw extruder - 25/25 LD screw Dkoln Nm Nerg Ebcshol - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: Djln Nm Nov Iflpohjkl • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: used, Functionality: limited functionality, machine/vehicle number: OPTIMALHC2500, total width: 3,000 mm, Oil-hydraulic sub-piston press with 5 cylinder sub-piston press system, continuous pressing force 2500 tons, upper and lower pressure plate reinforced, 2 cylinders for rapid feed, mold box 1,700 x 800 mm, without switch box and control Dslsv Ic T Djn Nm Nhekl

Condition: excellent (used), Functionality: fully functional, Motan Luxor S120 granulate dryer for sale in very good condition. Works perfectly, has been used very little. - Type LS 120 - CN - V2 - 0 - 0 + EU - Serial number 12 EU 0022 - 400 V - 120 m3/h dry air volume - Heating output 10.5 kW Djlnev Ic Inj Nm Nhjkl - 32A connection Shipping possible by arrangement. If you have any questions, please contact us at any time.

Condition: excellent (used), Functionality: fully functional, Output 24.5 kW Dslnjuxch Te Nm Nhokl 7 sections The appliance has been tested and is fully functional!

Year of construction: 2005, Condition: ready for operation (used), Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible. Dkeln Nsv Ip Rvem Nhsl

Year of construction: 2005, Condition: good (used), Krauss Maffei MC3 controll panel Fully functional tested. Dolenvtwvjn Nm Nhjkl

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, The extruder is a single-screw extruder with an output of max. 120 kg/h. The screw diameter is 90mm. PVC pipes up to 150mm were produced on the system. The system is fully functional. It was replaced by a new one with a larger output. Dkjlnjufxxro Nm Nhsl The tools and calibrators are not included.

Condition: used, Year of construction: 2004, operating hours: 32,000 h, clamping force: 75 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, overall weight: 4,700 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Ferromatik Milacron Type: EE75-300 Condition: technisch überarbeitet Operating hours: ca. 32.000 CLAMPING UNIT: - Clamping force: 75 t Öffnungsweg: 320 mm Mould installation height min.: 150 mm Mould installation height max.: 480 mm Tie bar distance (h x v): 405 x 380 mm Plate dimension (h x v): 575 x 570 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU300 Screw diameter: 30 mm Injection weight in polystyrol: 103 g Stroke volume: 113 cm³ Einspritzdruck: 2.500 bar CONTROL: IQT44 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x hydr. + 1 x pneum. Air valves: 1 Hot runner control devices: - Robot interface: Euromap 67 Other equipment: - Dkolnom Nnzgs Nm Nhsl GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 4.700 kg Total size L x B x H: 4,4 x 1,5 x 2,0 m

Condition: good (used), Functionality: fully functional, Heating output 4.5 kW Connected load 5.05 kW Medium: Oil 2 pieces available Price 500 EUR / piece Dkslouwdmuen Nm Nhol

Year of construction: 2007, Condition: ready for operation (used), Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible. Dsln Nmjv Ip R Ne Nhokl

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Manufacturer: E. Braun Type: BT 6 OT Dsln Nm Nsuwdq Tshjkl Medium: Oil Heating capacity: 3/6 kW Heating temperature: 150C Tested and fully functional.

Year of construction: 1998, operating hours: 62,144 h, Condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Dsln Nev Ifwxem Nhokl

Condition: excellent (used), Functionality: fully functional, power: 1.1 kW (1.50 HP), Material vacuum cleaner from Lanco Type LA 11-N1 Power 1.1 kW Dkelnov A Ah Ro Nm Nhel Air 4-6 bar Tested and fully functional!

Condition: excellent (used), Year of construction: 2016, Type BAFAG ATU 25 Power 2 kW Dkeljuvg Dxjn Nm Nhel Material conveyor Labotek Power 1.1 kW