Condition: excellent (used), Year of construction: 2016, operating hours: 266 h, Combined planing and thicknessing machine from Hofmann with a 4-knife Tersa cutterhead, very robust machine construction in a compact design. Pgsdpozdk T Hsfx Aahen A special feature of this machine: The planing table does not need to be folded up for thicknessing, so no conversion is necessary. Planing width approx. 500 mm Thicknessing table electrically adjustable with digital display Rubber-coated feed roller, new Rubber-coated outfeed roller, new Planing height approx. 4 - 245 mm 2 feed speeds, 7 + 14 m/min Table length 2400 mm Drive motor 7.5 kW with automatic motor brake and soft start device 4-knife cutterhead with new Tersa reversible knives Slotted table lips Cutterhead guard TX-GL Fence swiveling with a guide strip Concave/convex edge setting of the planing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160 mm Emergency stop switch Original paint, only a few spots have been touched up V-belt renewed Tersa knives renewed Rubber rollers renewed Operating manual CE marking Machine from a small company in top condition, ready for immediate use, operating hours recorded: 266 hours. No scratches on the tables. Dimensions approx. 2400 x 1200 x 1200 mm (LxWxH). Weight approx. 1400 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, bore 70 mm length 10 mm Pjdpfx Aozdk H Tsahjgn knife system WP Z8 V8 circle diameter 220 mm material Stahl Available: 16

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm Pjdpfxsyr Dclj Aahogn single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg

Condition: good (used), Year of construction: 1990, Maximum cross-section of finished workpieces: 220 x 120 mm Minimum cross-section of finished workpieces: 25 x 6 mm Minimum workpiece length: 300 mm Feed length: approx. 2000 mm Pgedozfy Ntepfx Aahen Diameter of the cutter shaft: 40 mm Diameter of the cutter heads (4 cutters each): 120 mm Maximum diameter on the left and right vertical shafts: 160 mm Infinitely variable feed rate: 0-30 m/min Dimensions: approx. 3980 x 1750 x 1530 mm Weight: approx. 1800 kg The data was taken from a brochure, therefore no guarantee is given.

Condition: used, bore 50 mm length 150 mm Pgodpfjzc Rx Uox Aahen knife system RVZ circle diameter 150 mm number of blades 4 Z material Stahl Unused stock. Set of 2.

Condition: used, bore 70 mm length 12 mm knife system WP Z8 V8 circle diameter 220 mm Pjdezc Rxzepfx Aahjgn material Stahl Available: 3

Condition: used, bore 70 mm length 14 mm knife system WP Z8 V8 circle diameter 220 mm material Stahl Pedpfx Aaszc Rxuehsgn Available: 8

Condition: good (used), Pressure shoe for Weinig planer and moulder Pgjdeyryzkspfx Aahsn

Condition: excellent (used), Catalogue number 7988 TECHNICAL DATA - spindle width: 510mm - 4-knife planing shaft - max thickness of workpiece in thicknesser: 200mm - max thickness of workpiece on side heads, 3-sided: 100mm From above: - pawls - toothed infeed pulling roller - planing shaft - pressure beam - smooth outfeed pulling roller From below: - 2 adjustable rollers in lower table - guide rail From rear: - 2 side spindles + pressure beams - spindle height: 100mm - max spindle spacing: 510mm - spindle diameter: 30mm - manual left/right spindle adjustment - motor approx. 2x3kW Podpfx Aaszc Nk Nohegn - main motor: 7.5kW - exhaust port: 2x120mm - overall dimensions (L/W/H): 1700x1200x1000mm - weight: 1060kg ADVANTAGES – made in Poland – 4-knife shaft – DTR documentation – very good condition – used planer Net price: 12,900 PLN Net price: 3,070 EUR at 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 Pjdpjzc H T Usfx Aahsgn 214 KW

Condition: used, Year of construction: 2004, Speed 60 m/min Capacity 260/150 mm Tool holder diameter 50 mm Composition: Lower spindle sander 15kW Planer straight 11 kW Gauche planer 11 kW Pjdpfszc Nb Iox Aahjgn Top planer 15 kW Planer straight 11 kW Gluing left? Wait: 'Raboteuse gauche 11 kW' in French means 'Left planer 11 kW'. Planer for top finishing 15kW Planer bottom finishing 11kw Drive power 11 kW 8 workstations Digital positioning Chrome table Counterplayers Lubrication 400 V

Condition: good (used), Code: 0408 Brand: CMC - ITALY Model: SP 630 - CE Standard Automatic thickness planer for joinery, furniture, custom-made furniture, wooden joinery, sawmills, timber carpentry, plastics and various - CE Standard Technical specifications: Working width 630 mm Max working height 300 mm Min working height 4 mm Pgedpezc Hrdsfx Aahsn usefu thickness capacity 8 mm N° 4 knives Rotational speed 5000 rpm Feed speed 4–20 mt/min Working height display Motor power Hp 7,5 Table lifting motor power 0,5 Hp Feed motor power 0,75 Hp Suction inlet diameter 120 mm Overall dimensions mm 1200 x 1120 x 1150 h Weight kg 870

Condition: used, bore 50 mm length 130 mm knife system Streifenhobelmesser circle diameter 125 mm number of blades 4 Z Pgodpfszczg Aox Aahen material Stahl

Condition: good (used), Year of construction: 2021, functionality: fully functional, Multifunction machine minimax cu 410 F 26 TERSA Multifunction machine minimax cu 410 F 26 with TERSA cutterhead, Pgjdpfoyz Sdwex Aahen Year of manufacture 2021, 30 mm spindle arbor, Miter cutting device and pivoting milling spindle, ø 315 mm main saw blade, Saw unit with double pivoting segment guide, Scoring device can be retrofitted, Rip fence 1115 x 335 mm, Saw unit can be pivoted from 90° to -45°, Right-hand/left-hand rotation of the milling spindle, Separate saw parallel guide and tenoning guide, Planer table 410 x 1810 mm, Chip removal 5 mm, 3 dust extraction ports, ø 120, Thicknessing table 775 x 410 mm, Working height for thicknessing 3 - 230 mm, 400 V, 50 Hz, 5 kW, Format sliding table 2660 x 360 x 142 mm, Table 1250 x 430 x 900, Weight 560 kg Transport possible for an extra charge.

Condition: excellent (used), functionality: fully functional, working width 220mm working height 120mm 4 heads spindles diameter 40mm variable regulated feeder delta/star start two axes heads regulation electric regulation of pressure beam spring pressure of feeding rolls Pgjdpfxsyxlqxo Aahen spindles speed 6000 RPM

Condition: excellent (used), Catalogue number: 7265 TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted Pgodpfszcvh Iox Aahen – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)

Condition: new, Catalogue number S0232 - New machine, in stock - CE certificate - Shaft width: 410 mm - 4-knife shaft - Protected cutter head Ø 125 mm - Planer knives: 410x35x3 mm - Cutting depth: 8 mm - Speed: 4700 rpm - Motor: 4.0 kW - Power supply: 3x400 V - Table length: 2650 mm - Infeed table length: 1500 mm - Outfeed table length: 1100 mm - Tilting fence 0°–45°, 1500x155 mm - Extraction port Ø 160 mm - Dimensions (L/W/H): 2650/900/1000 mm Pgedpezcu Uasfx Aahon - Weight: 720 kg Net price: 21,000 PLN Net price: 4,900 EUR (based on 4.20 EUR exchange rate) (Prices may change due to currency fluctuations)

Condition: excellent (used), CATALOGUE NO. 7916 TECHNICAL DETAILS - Working width: 510 mm - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min Pgodpfx Aaozcu Tvehsn - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW Psdpfx Aaszcu Rzshegn 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm • Min. Working height 6 mm Pgodpfx Asxxkt Ajahsn • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ RPM: 3000 rpm Hydraulic motor: 2.2 kW Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Pgjdpfx Aaeyrnxkshjn Weight: approx. 1350 kg

Condition: used, Year of construction: 2007, Used LMG Leadermac Smart MA 423 model LMC-423S 4-spindle edge trimming machine workable width: 15-230 mm workable height: 10-150 mm minimum individual piece length: 200 mm spindle rotation speed: 6000 rpm 2-axis positioning with electronic control automatic motor start absorbed current: 52.5 A motor power: 1st motor: 7.5 HP 2nd/3rd motor: 10 HP 4th motor: 10 HP feed motor: 4 HP with cardan drive Pgjdozfgvgopfx Aahon weight: 2200 kg year of manufacture: 2007 compliant with CE regulations

Condition: used, bore 35 mm length 180 mm knife system Streifenhobelmesser circle diameter 140 mm number of blades 3 Z material Stahl Pedpfxszcq Ate Aahsgn Available: 2

Condition: not inspected (used), Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Weinig Powermat 500, year of manufacture 2010, window version ----- technical details short summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pedpfeyq S Dujx Aahogn Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: ----- - Existing planing and molding tools by Leitz (price on request!) (Technical specifications according to the manufacturer, without guarantee!)

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Pgedpoyy A Iqofx Aahsn Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...