Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Hjdpfx Asyg Edgopdow Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: excellent (used), Year of construction: 2002, operating hours: 20,000 h, functionality: fully functional, working width: 1,700 mm, type of input current: three-phase, total width: 4,500 mm, total length: 8,030 mm, total height: 2,150 mm, power of the servo motor: 20 W, overall weight: 34,000 kg, input voltage: 380 V, Semi-automatic die-cutting machine. Manual sheet feeding, Hodpfxjzidhbo Apdow die-cutting section, waste removal section, and palletizing.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems Hedpfjy Ufgrex Apdsw A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Year of construction: 1996, condition: ready for operation (used), machine/vehicle number: 960606 (= tevens de dag dat machine fabriekspoort verlaat), PRICE LOWERED for quick deal ! Hedpfx Apexz Ncbedow

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm Hsdpfozq Tz Tox Apdjw * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: used, A laminating station with roller guidance for processing sheet material is offered. Equipped with a roller unit for material processing, material feed with guide elements, infeed and delivery tables, manual controls and a mechanical drive unit. Viewing possible by appointment. Hsdpo Agn Rfofx Apdjw

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 12-032-SP, total width: 1,900 mm, total length: 17,370 mm, total height: 850 mm, Linear folding and gluing machine equipped with 4 electronically adjustable glue guns for gluing 4/6-corner boxes (ERO). Hjdpfxozin Hhs Apdsw

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords Hedpfszlqzgsx Apdjw - ERO cold glue system (3 guns + side glue wheel with reservoir)

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Hsdsy Ed Hfepfx Apdjw Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Year of construction: 2010, condition: used, Agnati Master glue unit for corrugator with Vary Bond glue system Hjdoz Ekd Sopfx Apdow Working width 2500

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. Hjdev Nwwaspfx Apdew This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Year of construction: 2010, condition: used, Maximum Working Width Dimensions: 2.800 mm Minimum Working Width Dimensions: 570 mm Maximum Working Length Dimensions: Any Length Hsdpfx Asz R Uhzepdsw Minimum Working Length Dimensions: 320 mm Length Of Machine: 7.022 mm / Total Width Of Machine: 4.220 mm / Height: 850 mm

Condition: excellent (used), Year of construction: 2003, Size: Box length: 80-535 mm Box width: 50-500 mm Equipment: Standard version, laser counter, right-hand turning, - possible left-hand turning Types of packaging: 1-point packaging, 4-point packaging (min. side height 40 mm), 6-point packaging (max. 400 g/m²) Packaging material: 200 - 600 g/m² Packing scheme: 1-5 rows side by side, 1-5 layers stacked, Hedpsw H N Spefx Apdew Depending on the box type, up to 7 layers are possible Performance: up to 200,000 boxes per hour, cleaned, tested Overhaul 2023: all worn parts replaced The machine can be relocated quickly as speed is taken from the encoder. Machine changeover takes 5 minutes. - Possible installation at customer site by our operators with commissioning warranty +2500 EUR + travel costs, to be agreed individually - Additional set of new belts

Year of construction: 2018, condition: like new (used), machine/vehicle number: 228240C0016, We offer this like-new, Delta Neu C1X63 belt-driven RDO 30kW high-performance shredder fan, manufactured in 2018. Manufacturer: Delta NEU Model: C1X63 belt-driven RDO 30kW Year of manufacture: 2018 Power: 30 kW Maximum speed: 2700 rpm Voltage: 3×400 V If you have any questions or require further information, please do not hesitate to contact us via message or phone. Hjdpfx Apjzn Ulbsdew The high-performance shredder fan is in its original packaging and has never been used. A manual/operating instructions in German is available. The machine is located in 59823 Arnsberg.

Year of construction: 1989, condition: used, Folder Gluer bottom lock 4 gluing points it works to EB flute and solid board from 350 gr to 800 gr. Hedpfxsz Atf No Apdjw

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Hjdpsuk I Nxefx Apdsw

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Hsdpoz Smtrjfx Apdjw Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, Year of construction: 2007, machine/vehicle number: CC19, Used Case Sealer APSOL 3500 bph The Used Case Sealer APSOL 3500 bph performs automatic sealing of American-type cartons using hot-melt adhesive. Specifically designed for high-output bottling lines, this automatic case sealer provides reliable solutions that ensure tight closure, consistent efficiency, and enhanced operational safety. With a rated speed of 3500 bottles per hour, it meets industrial demands. Moreover, the machine accommodates multiple container formats and integrates seamlessly with standard configurations in the beverage industry. Technical Specifications of the ACS30HM Model APSOL manufactured this machine in 2007, and it currently operates in production. The structure, although compact, offers robust mechanical performance. Additionally, the integrated DELTA-type PLC system controls the sealing cycle, thermal adhesive regulation, and overall workflow with precision. As a result, operators benefit from accurate process control. The Used Case Sealer APSOL 3500 bph runs on a 400 Volt three-phase power supply, consumes 5 kW, and operates at a frequency of 50 Hz. Therefore, it remains fully compatible with European industrial standards. Supported Formats and Production Flexibility In terms of versatility, the Used Case Sealer APSOL 3500 bph processes various carton formats containing 500 ml, 750 ml, and 1000 ml bottles in 4×3 and 3×2 configurations. Furthermore, it offers high production flexibility and quickly adapts to different layout requirements. Operators can perform format changeovers rapidly; consequently, they minimize downtime and optimize line efficiency. In addition, the design facilitates routine adjustments without requiring extensive reconfiguration. Hot-Melt Adhesive Sealing System The machine uses a hot-melt adhesive applicator to ensure secure sealing. Unlike mechanical closure systems, this method provides strong adhesion that withstands both mechanical and thermal stress during transport and handling. Notably, the integrated sensors maintain a consistent operating temperature, while the adhesive distribution system guarantees even application. As such, the Used Case Sealer APSOL 3500 bph offers high-quality and repeatable sealing performance. Simultaneously, it reduces the need for rework and rejects. Safety Systems, Manuals, and Regulatory Compliance The Used Case Sealer APSOL 3500 bph includes safety systems that protect operators during operation and maintenance. In particular, safety barriers, emergency stop buttons, and certified electronic controls ensure compliance with European workplace safety regulations. Additionally, APSOL supplies the machine with comprehensive manuals covering installation, maintenance, and troubleshooting. Consequently, technicians can integrate and operate the machine efficiently from day one. Beyond basic documentation, the manuals also contain detailed schematics and recommended service intervals. Operational Summary Thanks to its structural strength, processing speed, and format adaptability, the Used Case Sealer APSOL 3500 bph serves as a reliable solution for end-of-line automation in bottling plants. Moreover, the inclusion of an advanced PLC, combined with its compatibility with hot-melt adhesive systems, enhances overall performance. In conclusion, this machine provides dependable sealing, minimal downtime, and seamless integration—making it an ideal choice fo... Hodps Adt Tmofx Apdjw

Condition: used, Year of construction: 2014, OMS with two heads no lance Hedez I Twgspfx Apdow up corners inserter

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Hjdpezt Idusfx Apdew Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Hsdpfx Apey Nc H Eedsw

Condition: like new (used), functionality: fully functional, Model 2DS: Measurable sheet sizes: 100 - 2000 mm Scale graduation: 1/2 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Angular deviations: 1/2 mm Hedpfxsygi A Te Apdjw Glare-free built-in illumination: 4 fluorescent tubes (210 Watt) Voltage: 220V - 50 Hz Exterior dimensions in mm: 2120 x 1150 x 220 Weight (ca.): 108 kg

Condition: excellent (used), Year of construction: 2025, operating hours: 1,260 h, functionality: fully functional, machine/vehicle number: 548, inner diameter: 38 mm, cutting length (max.): 4,000 mm, The core winding machine is designed for the production of 25-layer paper tubes with an internal diameter ranging from Ø 38 to Ø 250 millimeters. 3-year warranty. Hedpfoyvgcvox Apdew

Year of construction: 1988, condition: used, functionality: fully functional, PAAL RS 40/250 paper roll saw, Manufactured by Paal’s Packpressen-Fabrik in Germany. The machine is designed for cutting paper rolls and is suitable for industrial paper processing applications. Technical specifications: Manufacturer: Paal’s Packpressen-Fabrik Model / Type: RS 40/250 Year of manufacture: 1988 Machine number: 24458 Hedpfoxu A U Dsx Apdsw Motor power: 17 kW Rated current: 34 A Voltage: 380 V Frequency: 50 Hz Weight: 2,350 kg Condition: Used Price: €7,000 The machine is available for inspection. Category: Paper, cardboard & foil processing machinery → Cutting machinery Keywords: PAAL RS 40/250, paper roll saw, paper roll cutting machine, roll cutting machine, paper processing machinery, Paal’s Packpressen-Fabrik, paper rolls.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Paper cup 7OZ year of production 2022 ed 110 cup/min Auto lubricating Hodpfx Ajyrz Apspdew Cup colector