Used Papers for sale (2,390)

Condition: excellent (used), mileage: 579,675 km, power: 265 kW (360.30 HP), first registration: 07/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2015, Equipment: differential lock, Tractor MAN TGX 18.360 First commissioning: 20.07.2015 Read speedometer reading: 579,675 km Automatic gearbox: 12 gears Emission class: 6 Unladen weight: 7320 kg Wheelbase: 3.6 meters Tires on the first axle: +/- 50 Tires on the second axle: +/- 80 Laodpfx Ajwx Evusffok Brake lining on first axle: 99 - 98 % Brake pad on second axle: 44 - 42 % Adaptive cruise control Automatic air conditioning On-board computer Central locking Differentiated locking system Electric windows and mirrors GPS Orthopaedic seats Seat heating .... Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Year of construction: 2013, condition: reconditioned (used), We have a KAS C4 compact envelope inserting system, year 2013, available.The total counter is just 629.426 envelopes in its lifetime!!! This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Lodpskvpbpofx Affoak Configuration: - Single sheet feeder - Folding feeder in-line - 2 insert feeders (bottom feed) - Envelope section - Conveyor belt We sell this machine after complete maintenance

Condition: refurbished (used), Year of construction: 2008, We have a as new KAS 465 HS envelope inserting machine available, with optional Mueller transactional channel/feeder for feeding/collating/folding a4 documents with reading or counter. 3 Insert feeders (friction). This KAS 465 HS envelope inserter, year 2008. This machine was bought new by the same customer where the machine was at up to the last minute. This machine was a back-up system for mostly c4 production so therefore not used that often. We did completely maintain this machine and changed all parts which needed to be replaced. Lsdpfxji A Ixbo Affsak Configuration: Optional - mueller apparatebau 6809c transactional channel with autoloader - 3 insert feeders (bottom fed, friction) - Envelope inserting section KAS 465HS - Closing section - Conveyor This machine is now available for a demo

Condition: used, Year of construction: 2012, We have a KAS C4 465 HS envelope inserting system, year 2012, available. Counter is 4.509.335. This envelope inserter can process DL up to C4 envelopes. C4 envelopes with the flap on the long side. Lasdswqpipepfx Affsk Configuration: - Single sheet feeder - Folding feeder in-line - 3 insert feeders (bottom feed) - insert feeder in line - Envelope section - Conveyor belt We sell this machine as is or after complete maintenance

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift Laodpfx Asx Hqlwjffek This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? Laodpfeuanqaex Affsk We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Laodpfju Tg Sisx Affsk

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. Laedpfxoxzulhj Affek This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 cm

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH AIR SUPPLY: YES NOTES: *3 MODES * ROLL TO ROLL FABRIC Laedpfx Aov Dpyveffsk *ROLL PRINT TO PIECE FABRIC *ROLL FABRIC TO PIECE PRINT Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Laedpfxsx Nm Dzo Affsk Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: used, Year of construction: 2017, Universal Machining Center Machine type: DMG DMF 260 / 11 linear Lodpfx Aox Dr Ureffeak Control: CELOS Siemens 840D sl Operate Year of manufacture: 2017 TECHNICAL DATA: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Options: - Main spindle: 15,000 rpm, 46/30kW, SK40 - Dynamic package rapid traverse x-y-z: 80/60/60m/min - X-axis linear motor - Separate electronic handwheel - 60-position chain magazine - Bed flushing via M-function - High-pressure coolant pump 40 bar - 600L coolant tank with paper band filter - Rotary table integrated into table - B-axis in head - Automatic door - Coolant gun - Spindle probe - 2 pcs. Roto clear - Scraper belt chip conveyor This offer is non-binding and subject to prior sale. Changes, errors, and interim sale expressly reserved.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 60 mm, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², production capacity: 5,000 unit/h, Duplo Bookletmaking System 5000 The offer includes: 2x DC-10/60 Collating Towers Transfer Unit LUL-HM Stapling and Folding Unit DBM-500 Front Trimmer DBM-500T Batch Counter DBM-K Long Delivery Stacker DBM-400LS 2x DC-10/60 (20 Stations) Paper size: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height: 60 mm per station Feeder: Suction/blower air Sensors: Double feed, misfeed, paper jam, empty station detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Folding and Stapling Unit DBM 500 Paper size: min. 120 x 170 mm; max. 350 x 500 mm Speed: 5,000 cycles/h (A5) 4,600 cycles/h (A4) 4,000 cycles/h (A3) Stapling capacity: 5 mm (50 sheets, 80 gsm) Folding capacity: 25 sheets Number of stitching heads: 2 Lodpex Niupofx Affsak Sensors: Paper jam detection, sheet position display, wire end Memory: 12 jobs Folding and stapling types: folding without stapling; saddle stitching/folding; corner stapling/folding; corner stapling; block/side stapling Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Weight: 412 kg Front Trimmer DBM 500T Booklet size: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final size: min. 75 x 120 mm Speed: >5,000 cycles/h Processing thickness: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Condition: like new (used), Year of construction: 2017, operating hours: 23,043 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain TNC 640, workpiece weight (max.): 250 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 35,000 W, Year of construction: 2017 CNC controller: Heidenhain TNC 640 Laedpfxsx Nhras Affok Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Milling/turning table nc: Number of pallets: 30 places with robot Table dimensions mm: 450x400 Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/86 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper Equipment Chip conveyor Infrared probe Rinsing gun NC swivel rotary table Preparation for the use of the 3D quickSET Laser tool measurement for measuring tool length and diameter Direct measuring system XYZ Spindle active cooling unit MPC – Machine Protection Control Prepareted for automatation via M65 Paper band filter Machine running times Under power: 43989 Spindle Working: 23043

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000046, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, The printer's original purchase price was EUR 143,250! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Laodsx Ngkbopfx Affsk - Print speed A4: up to 328 pages/minute - Print speed A3: up to 171 pages/minute - Maximum monthly print volume: up to 10,000,000 A4 pages - Resolution: 600 x 1,200 dpi Paper Specifications - Paper weight overall range: 50 gsm – 300 gsm - Plain paper (Canon recommended media): 50 – 300 gsm - Coated media (Canon recommended media): 80 – 250 gsm - Paper format: 203 x 203 mm up to 350 x 500 mm MACHINE DETAILS Main Machine Dimensions - Dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm - Weight: 779 kg Meter Counts - A4 simplex: 67,535 - A4 duplex: 52,601,622 - A3 simplex: 0 - A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: excellent (used), Year of construction: 2017, Ref:11050 . 2017 Foliant Vega 400A Laminator. New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs. Equipped with: Integrated deep pile vacuum feeder and a high-speed bump separator Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system. Pneumatic high-pressure system (with integrated compressor inside machine frame) Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm). Feeder: Equipped with a rising pile front separation stream feeder and with a vacuum belt head. Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum. Overlaps are controlled, in an ‘in-run’ mode. Accuracy is +/- 2 mm under-lap (in a constant speed). Fitted with a lifting plate and its capacity is a 28 cm pile of paper. Laminator: Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4). The minimum sheet size is 20 x 30 cm. Compressor is integrated inside the machine frame as standard. Laminating unit is equipped with an adjustable twin decurl unit: • With a decurl blade for offset printed sheets decurling • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks). Roll of a film is mounted on a quick-changed shaft with a film tension control breaker. Shaft capacity is up to 3000 m of the 24 - 42 microns film. Film holder unit is equipped with an in-line trim slitter and a perforating wheel. 2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface. Pressure is pneumatically adjustable. Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. Warming up time is shorter than 10 minutes. Controlled by an interactive, easy understandable icon based touch screen System includes many automation items for an easy control of the machine and a reliable lamination. Separator: Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. Separated sheets are delivered into a vibrating jogger Laminating Films: BOPP films (24 – 42 microns) Nylon films (24 - 35 microns) Specification: Maximal Speed: single side 18 m/min. Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm Paper Weight: 115–500 g/m² Main Roller Pressure System: Pneumatic Minimal Sheets Size (w×l): 20×30 cm Maximal Sheets Size (w×l): 38x66 cm Maximal Performance: 2100 B3 / hod. Temperature Control: 80–140 °C, Warming Up Time 8 min Power Supply: 230 V AC, 50-60 Hz Ledpsx Nftnefx Affjak Power: 3150 W Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg

Condition: good (used), Year of construction: 1994, Machine-Details : Stock-No. 1022-2397 Type of machine Cavity Sinking EDM - Machine Make ZIMMER & KREIM Type PEC 850 Year of manufacture 1994 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information : With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Lajdpfx Afsx Nfzrefjk Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Condition: ready for operation (used), No 2 - USED- 4-AXIS HORIZONTAL MACHINING CENTRES WITH MULTIPALLET SYSTEM X-AXIS TRAVEL: 1200 - 1460 mm Y-AXIS TRAVEL: 800 - 1000 mm Z-AXIS TRAVEL: 1200 - 1200 mm RAPID FEEDS X-Y-Z: 36 m/min SPINDLE: 25 - 6000 rpm; 900 - 1130 Nm; ISO 50 - DIN PALLET: N.18+N.12 ; 800X630 + 1000X800 mm; 15 rpm MAX ADMITTED LOAD: 1800 - 4500 Kg MAX MACHINABLE PIECE DIMENSIONS: 1250X1250X1400 - 1700X1350X1400 mm Lodsn Ny A Dopfx Affoak TOOL MAGAZINE: CHAIN-TYPE ; 300 POS MAX TOOL DIAMETER: 125 (250) mm MAX TOOL LENGHT: 650 mm MAX TOOL WEIGHT: 40 Kg CONTROL UNIT: SIEMENS 840 D OVERALL DIMENSIONS: 10000 x 6000 x 3800 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER NOTE: LINEAR MULTI-PALLET SYSTEM LPP WITH No 30 PALLETS AND No 2 LOADING AND UNLOADIND STATIONS; 290 yom 2009, 2.500Kg; 230 yom 2008, 1.200Kg.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, stack height: 60 mm, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², production capacity: 5,000 unit/h, Duplo Booklet Production System 5000 The offer includes: 1x Collating Tower DC-10/60 Transfer Unit LUL-HM Staple and Folding Unit DBM-500 Front Trimmer DBM-500T Preset Counter DBM-K Long Delivery Stacker DBM-400LS DC-10/60 (10 Stations) Paper size: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height: 60 mm per station Feeders: Suction/blast air Controls: Double sheet, misfeed, paper jam, empty station detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Folding and Stitching Unit DBM 500 Paper size: min. 120 x 170 mm; max. 350 x 500 mm Speed: 5,000 cycles/h (A5) 4,600 cycles/h (A4) 4,000 cycles/h (A3) Stapling capacity: 5 mm (50 sheets, 80 gsm) Folding capacity: 25 sheets Number of stitch heads: 2 Controls: Paper jam, paper position indicator, wire end Memory: 12 jobs Folding and stapling styles: folding without stapling; saddle stitching with folding; corner stapling with folding; corner stapling; block/side stapling Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Laedpfx Afjx Nimrofjk Weight: 412 kg Front Trimmer DBM 500T Booklet size: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final size: min. 75 x 120 mm Speed: >5,000 cycles/h Processing capacity: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: Laedpfxox Nc Ats Affsk – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Lsdpfsx Nfr Rex Affsak Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Self-diagnostic system with error indication on display Metric and imperial changeover Specification: Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min Lajdowla Hnepfx Affjk TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: good (used), Atom SE 25 Hydraulic Arm Press This machine is in perfect condition and ready to operate. It is ideal for die-cutting difficult materials, particularly in the leather goods and printing industries. It can be used with both leather goods and bookbinding dies. It cuts paper, cardboard, leather, plastic, etc. Pressure: 25 tons Power: 380V Table dimensions: 1000mm x 500mm Hammer dimensions: 500mm Maximum stroke: 90mm Motor power: 0.9kW Lajdsx Nc Agjpfx Affjk Weight: 1030kg Two-handed control.

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Laodpfx Aox Nfr Deffsk Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE Ljdpfxsh Hfrns Affsak

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Ledpfxsx Nfp Ae Affoak Diameter of the drill: 2-10 mm, Stack height: 60 mm.