Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Lamina GL 1400 Year: 2017 Max size: 1400 x 2150 mm Redpfx Adewna R Esasn Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Extras: 2 cold tape guns adhesive Very good condition Available immediately Located: Europe Eastern

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Redpfxjx Hzm So Adaon

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 97300080, Used Slitting & Rewinding Machine – Kampf Universal 5 (U5) Manufacturer: Kampf Maschinenfabrik, Germany Year of Manufacture: 1989 Serial No.: 97300080 Working web width: 13200 mm Maximum speed: 600 m/min Working speed: 200–450 m/min Web type: Roll-fed Purpose: Longitudinal slitting and rewinding Materials: BOPP, PET, PE, PP/CPP, paper, foil, laminates Unwind section: Single unwind station Max. unwind diameter: 1000 mm Max. roll weight: 600 kg Core diameters: 76 mm (3”) / 150 mm (6”) Clamping system: Cone chucks Tension control: Electronic, DC drive Braking system: Mechanical or pneumatic Slitting system: Razor blades and rotary shear knives Minimum slit width: 25–50 mm Knife positions: 10–20 Bottom shaft: Steel, ground Top knives: Pressure-adjustable Trim removal: Aspiration system Rewind section: Duplex rewinding (two-shaft) Max. rewind diameter: 800 mm Max. roll weight: 150–250 kg Shaft type: Cone chucks or air shafts Supported cores: 76 mm (3”), adapters available Winding quality: Uniform, controlled tension Drives: DC Siemens SIMOREG 6RA21 Power supply: 380–400 V / 50 Hz Total power: 20–45 kW Rsdpfox Hgkiox Adasn Machine length: 4.5–5.5 m Machine width: 2.2–3.0 m Machine height: 1.8–2.2 m Machine weight: 3500–5000 kg

Year of construction: 2005, condition: used, Rotary die-cutter Curioni Plus 240x165 vacuum introduction 3 colors Polishing machine Castaldini year 2005 equipped with soundproof cabin Rsdox Hgf Tjpfx Adasn

Year of construction: 2024, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: ZH-500, Folding and gluing machine for folding and gluing cardboard. Minimum size 3 cm, maximum 30 cm. Includes spare wear parts. The machine is as good as new and can be seen in operation in Enschede. Rsdpfxex Hfh Ho Adaen

Condition: used, Year of construction: 2023, functionality: unexamined, DYSS X7-1630C Digital Cutting Machine DYSS X7 Super-Head cutting head with 2-position tool holder and router Rodpfxox E Uw Ij Adasn Conveyorised bed (note mat/belt damaged) Cutting area 3000mm x 1600mm 2 vacuum pumps Starmix Electrostar NSG ADL-1445 mobile vacuum cleaner Lightguards Control 4 cutting tools X7 TKT (correx & foamex) X7 KKT (vinyl) X7 MPT (creasing) unmarked foamex cutter

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kolbus NM + PK + SW Offered as a bundle Machines are available for demonstration (The Hörauf laminating machine shown in the video is not included in this offer) Redpfx Ajwxvfgodaon

Year of construction: 2018, condition: used, Automatic and Compact Rjdpfx Adsx E Awioaon

Condition: used, Year of construction: 1997, Vacuum feeder n°3 colors Automatic Slotter Rodpjx E Aqpofx Adasn Rotary Die Cutter with Serra Rapid system Folder Gluer with Counter Ejector Boundle strapper Emmepi year 2006 mod pc 1450

Year of construction: 2014, condition: used, Technical data: Material: PET aluminium-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4–153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) • max. 270 N (φ1000 mm) Winding tension: • φ200 mm: 50–300 N/m • φ400 mm: 50–170 N/m • φ700 mm: 50–100 N/m Mechanical specifications: 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback sensor • Dancer roller included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” with adapter • Web guide: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and contact rollers with pneumatic pressure adjustment 3. Slitting Mechanism • Upper/lower NC shear cutters • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Precision: ±0.1–0.2 mm • Dust extraction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Location: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roller control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Contact roller with pressure adjustment • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilting function Electrical & control: Line drive motor: 7.5 kW AC servo Winding drive motor: 11 kW AC induction Unwinding drive motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwinding panel, mini winder panel, auxiliary panel PLC: Fuji Electric Rodpfx Adox Ez Umoaon Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Required floor load capacity: ≥ 2 ton/m² Documentation: 2 operating manuals Spare parts: • Drive belts (4 types for line drive) • Winding drive belt (1 type) • Unwinding drive belt (1 type) • Standard tool set

Condition: used, Year of construction: 1996, Technical Data: Working width: 1200 mm Materials: BOPP, OPP, CPP, PET, OPA Parent roll diameter: 800 mm Final roll diameter: 600 mm Rjdpex Ezwzofx Adasn Maximum speed: 300 m/min Web guiding system: Yes Knife type: Razor & rotary blades Trim exhauster: Included

Condition: good (used), Year of construction: 2018, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Rodpfx Adou Upupoaen Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min COATED WEB BOPP 12 - 80 μ PETP 10 - 30 μ LDPE, LLDPE 30 - 200 μ OPA 12 - 18 μ NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 60 - 150 μ PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ PETP 8 - 30 μ LDPE, LLDPE 20 - 200 μ OPA 12 - 18 μ NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ PP CAST 20 - 150 μ COEX FILM 25 - 200 μ PAPER 40 - 150 gr/m2

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 610, Cutting and printing line for 3-layer cardboard with flexo printers (2-colour printing) - maximum sheet size 950 x 2200 mm (skip - feed 1200 mm) - minimum sheet size 260 x 280 mm Rodpfjwl Izysx Adajn Machine dimensions length - 3550 mm width - 3660 mm height - 3500 mm weight 8000 kg power consumption - 8 kW Feeding unit to the device using a strip. The operation is supported by sucking the sheet with an air pump

Condition: good (used), Year of construction: 2018, HEIDELBERG DIANA SMART 115 Manufacturer: HEIDELBERG Year of construction: 2018 • 2018 Rsdoxyuapepfx Adajn • Folding carton line • Longitudinal seam carton: • max. 1,150 x 600 mm • min. 75 x 55 mm • min. 45 x 55 mm (with small carton device) • Crash-lock bottom carton: • max. 1,150 x 600 mm • min. 146 x 80 mm • 4-point erect carton: • max. 1,150 x 680 mm • min. 120 x 110 mm • 6-point erect carton: • max. 1,150 x 630 mm • min. 250 x 130 mm • with BELKHOFF control system • Rolling and drying tunnel • TÜNKERS EAS 480 delivery station, right, 2019 • In production • Available: immediately • Location: Germany

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate Redpfx Adeuwru Hoaon

Condition: excellent (used), Year of construction: 2014, HMB rotary punching machine working width 125cm, 400v power supply Redpfovdyinsx Adaon

Year of construction: 2003, condition: not inspected (used), Hello, I sell a rotary die-cutting machine for the production of corrugated cardboard packaging with sloter function of Polish production PRYMAT. The machine has 2 sections flexographic printer, creasing and punching sections and vacuum feeder. Max format 2400/1400, printing area 2200/1360. It makes cardboard boxes from 3 and 5 layer cardboards. Rodeu A I Tvepfx Adaon

Condition: good (used), working width: 2,500 mm, type of input current: three-phase, input voltage: 380 V, Bending machine for the production of corrugated cardboard packaging. 4 creases 3pkt ( regulation of height of each crease separately), 1 pair of knives for cutting.The machine has 5 shafts Rodpfx Aot Syrbodaon

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. Rjdpfx Adon Hxiijaon - Rotary cross section - cutting width max. (mm): 2100 - heating: included - cooling: included

Year of construction: 2015, condition: good (used), We are selling 3 used paper pulp thermoforming machines in good condition and additional equipment. Model TPM-1500, manufactured by "Taiwan Pulp Molding" - one of the world's leading companies in this area. Thermoforming Line Description: 3 stage production (forming + drying 30t + hot pressing 50t). 480 v, 60 Hz; Manufacture date - Oct. 2015. Effective Molding Area, mm - 1500 x 900 x 120; Overall dimensions, mm - 7600 x 2250 x 3700; Weight - 16 tonnes; Production speed - up to 80 kg/h; The necessary quantity of operators - 1; Press pressure (critical for quality and performance) - 40t (1st) / 50t (2nd); Movement mechanism - Servo drive + ball screw, encoder positioning, accuracy +/- 0.01 mm for the drive, 0.05 mm for the mechanics; Automated sprinkles for quality improvement - For molds: adjustable time interval (15-20 bar). For products: automatic (2-3 bar); Redpfx Aonab Evsdasn Safety - emergency stop button, optical sensors, zone security fences. Installed power - Up to 400 kW, depending on the type of product and quantity of heating elements. Features: 1. Completely dry-in-the-mold pulp product. 2. No distortion or variation in shape & size. 3. Smooth surface, highest quality finish in the industry. 4. Maximum mold utilization. 5. Suitable for various product's wall thicknesses. Suitable for the production of the following products: High-finish molded paper packaging; Single-use paper dishware; Single-use paper Cup lids; Paper Cup holders; Paper egg cartons; etc. Each Thermoformer set includes: Taiwan Pulp Molding Auto Stacker - TPM-AS-1500 0.5 HP, Two-Stage Auto Stacker 480 v, 60 Hz, Belt Width: 1500 mm; Cutes Water-ring Vacuum Pump (2017) - Cutes NN-1001FCD vacuum pump, 75 HP, 880 RPM, 1,000 CFM. Price per 1 Set: Thermoforming machine 300 000 euro + Autostacker 20 000 euro + Cutes water-ring vacuum pump 5 000 euros = 325 000 euros per set. If purchase few sets discount can be discussed. The last set includes a pulp preparation system and costs + 50 000 euros: 1. Taiwan Pulp Molding Co. Hydropulper w/Auto Feeding Conveyor (2017) - stainless steel hydropulper w/ 100 HP motor, 90" x 80" tall, w/ 47" x 44" x 31" dump hopper, including auto feeding conveyor; 2. BTG Instruments Consistency Control Unit - MnCPM-1300 type HX/Q0/C2/5/10 consistency transmitter unit; 3. Conical Refiner 75 HP; 4. Taiwan Pulp Molding Co. Cleaner Screen (2017) - 30 HP;

Condition: ready for operation (used), Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit. Rjdpex Db Twefx Adajn

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, working width: 1,600 mm, M&M Mediterranea de Maquinaria, Pizza box machine Rotary cutter line M&M WRC 98 1150-1600mm Fustellatore rotativo M&M MODE WRC 98 1150-1600mm The box production process is as follows: -Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colors, cuts the box and sends it on with a tape and stacks it. -The machine makes about 50,000 boxes in one shift. Redpfx Adoru Hl Ijaen -The largest dimensions of cardboard that can go into the machine are 1150*1600. -The machine has about 15 to 20 tools for different sizes of pizza boxes. -New electronics are in the machine Video of machine in production available on demand.

Condition: good (used), Year of construction: 2023, Casemaker DE Pack QYKM-1400x2900 4-color flexo printer with ceramic anilox and doctor blade system Year: 2023 Max. size: 1400x2600 mm Skip feeding area: 2180x4000 mm Min. size: 350x750 mm Redpsxw Nmrofx Adaen Max. speed: 200 pcs/min Rotary die cutting Vibration Stacker

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: Nr.7723202, total width: 2,500 mm, total length: 3,400 mm, total height: 2,500 mm, overall weight: 9,000 kg, input current: 20 A, input voltage: 400 V, Best hand-built letterpress machine in 72 x 101 format. Requires very little space for this size. Extremely robust construction. Motor has only run for 3 years after overhaul, feeder table belts made from Habasit. We have three of these machines in daily production ourselves, used for die-cutting, creasing, perforating, and blind embossing. Output per hour is easily 3,000 to 3,500 sheets. Can also be converted to 72 x 102 cm format. Die-cutting plates for these machines are available from us. We have four of these Condor machines in stock, and they can be purchased in a package of 2 or 4 units. Rjdpjx A S Ipofx Adaon

Condition: ready for operation (used), Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Rsdpfx Aex A Izlsdasn