Folder gluer

VEGA MAYOR 1430 T + ERO

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms Tedpfxjzlqzgo Apdsd - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: Tedpfx Apoycv Dvsdsd 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation Tsdpfx Aozg D I Njpdjd - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Lead Edge type Sun with alignment table LONG Feeder and OS and OOS squaring joggers Die cutting station with center line II Stripping station with Quick Lock clamping of male and female tools Removal of grip edge High pile delivery Max speed 5,500 cycles/hour Max size 1,200x1,650 mm Tjdpfxozmrnws Apdsd

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials Tedpezlqwzofx Apded - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Tsdpfsykam Dex Apdod Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 201023, DICER MOD. F-36 HEAVY SERIES SOUNDPROOF DICER for granulating continuously extruded plastic sheets, for thermoplastic products. Maximum width of the sheet to be ground 350 mm and thickness 6 – 8 mm. HP 20 V. 400 Hz 50 motor Rotor in wear-resistant steel with high chromium content, multiple blades with 14 cuts and speed from 10 to 30 m/min. Transmission by belts Tsdpfx Apev Tadwsded Steel towing rollers with progressively variable trino speed and in accordance with the number of cuts. Size of the granule obtained 3 x 3 mm Pneumatic presser Base in solid steel structure The machine is soundproofed Electrical panel in compliance with CE standards with remote control switch and safety micro. SPEED VARIATOR WITH INVERTER

Condition: used, Year of construction: 2000, operating hours: 130,000 h, functionality: fully functional, overall weight: 22,000 kg, We are offering this used ENGEL ES 2050/300 HL injection molding machine, manufactured in 2000, for sale. Type: ES 2050/300 HL Machine No.: 40505 Year of manufacture: 2000 Weight: 22,000 kg Tjdpez Hvvisfx Apdod Operating hours: 130,000 2 hydraulic core pull units EM 67 interface for robots Sold without a magnetic plate For sale: Engel ES2050/300HL (EUR 10,000) and Wittmann W753 (EUR 10,000). Together for EUR 19,000. Production continues until January. Inspection and collection possible at the end of January. Location: 7343 Neutal, Austria.

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. Todpfsxwnb Iex Apded No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar Tsdozq Df Nepfx Apdsd The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.