Used Peddinghaus 210 13 for sale (124)

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Bodpfei Duh Iox Ak Eswl Weight 2000 kg good condition

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bwodpfxjh Uhb So Ak Eol Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm Bjdpjcxxrpofx Ak Ejwl hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t Bwedpfx Aewth N Hok Eol dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Bwjdpey I Rc Sefx Ak Esl Price: €1,500 plus VAT, ex site

Condition: used, Year of construction: 1978, serial number 4412956673057 95 to. ca. engine output 7,5 kW weight of the machine ca. ca 5 t dimensions of the machine ca. 2,2 × 1,0 × 2,3 m Bjdpfx Asy Hl Rbjk Eowl Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Bwjdpfewcqmajx Ak Esl Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear Bsdpfeyh Rnkjx Ak Eowl bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Very well maintained Bodpfxoyg D Nns Ak Eswl Punching force 45 t Incl. various punching dies

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Bjdpfxew Ip D Hs Ak Ejwl Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg Bwodpecc Ubusfx Ak Esl

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm Bsdpfovh I T Nex Ak Eowl L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Bjdpfx Aew Sy Ecok Eswl Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller.

Condition: used, PEDDINGAUS Type: 210/20 EXCELLENT CONDITION Bodpfx Aks Dv Nnj Eswl

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW Bwsdpfsit T Hyex Ak Esl - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 0401-260013, The Peddinghaus HS FDB-2500 is a high-performance CNC plate processing center for the precise and economical processing of steel plates. The system combines drilling, thread cutting, countersinking, marking as well as oxyfuel and optional plasma cutting in one fully automated system - ideal for modern steel construction, plant engineering and industrial production. Bodpfey Ianksx Ak Ejwl

Condition: used, functionality: fully functional, Year of construction: 2016, Flat shear blades, 520 mm long, with four cutting edges, also for shearing angle iron 45° material support table with gauge stops on the flat shear station section shear knife for shearing angle iron 90° as well as rounds and squares quick-change punching attachment up to 39 mm Ø, for punches and dies of the blue series or with universal die block for die no. 3 height-adjustable and swing-away stripper with exchangeable plate square notching attachment material support table on the notcher station two two-stage foot pedals and electric control elements on the punch station and notcher station hydraulic low pressure spotter for foot operation connecting sockets for external engagement, e. g. via electrical length stop Bodey Ndt Hspfx Ak Eswl integrated hydraulic power-pack

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Bwedpfxey I Rc Eo Ak Eol Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 5053-4053040H002, power: 11 kW (14.96 HP), Bar shears Peddinghaus Caddy 50 used, very good condition Bodpfx Astuknysk Ejwl year of construction 1999 Technical data: Shearing force/diameter (max.): 900 kN/50 mm Drive power: 11 kW Equipment/special features: bar magazine, 6 m, length stop, safety device

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Technical data: Shearing force/diameter (max.): 2000 kN/63 mm Drive power: 30 kW Bwedotukpaopfx Ak Ejl Equipment/special feature: bar magazine, 6 m

Condition: used, Punching force: 300 kN Bsdpfx Aoy Epkgjk Eowl Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table Assortment of tools is included in the price

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Stroke discharge: 510 mm Hole 31 in 25 mm Flat bar: 500 x 22 mm Hydraulic hold-down for the flat bar blade Four-square latch Weight: approx. 5000 kg Bwedof Nwn Uepfx Ak Eol Very good condition

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Bwsdpfxey E N Hde Ak Eel 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: used, Year of construction: 2002, functionality: fully functional, Detailed description to follow Bedpfx Akoy D N Rgs Eswl

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Bsdpfx Ajymfbfsk Eewl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum