Used paint fume extractors for sale (32)

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW Rodpfx Aexdpl Ujdaon - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Year of construction: 1994, condition: good (used), Working area approx. 2-080 x 1,430 mm, Rsdpepvil Tofx Adajn lateral baffles right and left, Filter area approx. 1,800 x 1,300 mm, 2 rows of paper volume filters approx. 650 x 1,800 mm inside fine filter G4 approx. 1.350 x 2.000 mm, air capacity 4.500 m³/h, pressure max. 500 Pa, motor 1,1 kW / 1.400 rpm.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. Rsdpfjxwz H Rjx Adaon - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: excellent (used), Tecno Azzurra CS3A painting wall – after technical review – heater – year of manufacture 2007 – CE marking TECHNICAL PARAMETERS: width 3200mm height 2350mm depth 1500mm Redpfx Ademmb Eujaen fan motor power 2.2 kW heater motor power 7.5 kW power supply 380V capacity 11000 m3/h

Condition: used, Year of construction: 2023, functionality: fully functional, For sale due to purchase of a larger system! Was only in operation for 1 year and was covered with cardboard. See photos. Redpfoxtucdex Adaen

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,550 h, functionality: fully functional, Paint mist extraction wall with dry separator Complete supply air system with exhaust, control cabinet, lighting, and piping inside and outside Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Year of manufacture 2011 From carpenter workshop closure / retirement, IN GOOD CONDITION Redpfexltm Sox Adaen ex workshop

Condition: used, Year of construction: 1990, Used machine Built approximately 1990 Technical specifications: W x H 2000 x 1600 mm + 2 side baffles and 1 top baffle Fan diameter 500 mm Availability: Short term Rjdpfjwb Ehvsx Adaon Location: Rhineland-Palatinate

Condition: new, Year of construction: 2022, Paint mist extraction Redpfx Aew I Uygsdaon New device Year of construction 2022 Ideal for woodworking companies, joineries/carpentry workshops and the trades in general Highly efficient air purification with high separation efficiency Mobile device for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Delivered ready to plug in Suction nozzle diameter 300 mm L x W x H approx. 1012 x 1135 x 1405 mm Connection 1.5 kW / 400 V Filter area 1 m² Noise emission max. sound pressure level 72 dB(A) Volume flow max. 500 Pa Weight 175 kg incl. starter set for FAG 1-4 Diameter 300 mm (3 m hose, 2 hose clamps, 1 collar with flange ring, 1 cover flap for outer wall) Availability: short term Storage location: Hochheim

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories Rjdpfx Adewv T R Uoajn

Condition: not inspected (used), M.-No. 105813, built in 1988, max. air flow 6500 m³/h, motor power 2kW, with heat exchanger, 1" water connection, LxWxH: 2150 x 820 x 820 mm, 2 return air ducts 2000x950x400mm, 1 return air duct 950x950x400mm, external wall connection 700x700mm, bird screen 660x590mm, heat exchanger outlet 400x400mm, WITHOUT connections to return air ducts Rsdowhncpjpfx Adajn

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Rodpfjv Svcyex Adasn

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long Rodpfsiau Tzjx Adajn 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Rsdpfxovwfm Ss Adaon

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Rjdpfjv Svc Hox Adajn