Used Mist Extraction for sale (4,467)

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model Iaodpszdgawjfx Aquou AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Iaodpfxsbumr Se Aquju Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Iedpfovvizkjx Aqueau Storage location: Garbsen

Condition: used, Year of construction: 2022, Volume flow rate: 18,000 m³/h, active filter area 237.6 m², condensate drain, designed for 10 machining centers, mounted on a custom-built steel frame above the hall entrance gate, complete with piping, manufactured to the dimensions of the hall, and intended as a supply line to the individual CNC machining centers. Subject to prior sale. Iedoy T Nxvepfx Aqueau

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box Iasdpfet Rv Txex Aqusu

Condition: good (used), Motor : 1.5 kW Ijdpfx Aqohc Sypsueau Quantity : 2 pieces Price/ piece

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change Iedehw Ev Sopfx Aqueau - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels Iedpfju Aafdox Aqujau - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: Iedpfewqdycex Aqueau - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Iaedpfownr Ipox Aqusu

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Iaedpfewydgzsx Aquou

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Iaodowv Nbcopfx Aqusu Power consumption: 2.3 A Weight: approx. 120 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Iaedpfx Aqewv T R Uouju Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Iodpfjy Ezapsx Aqueau Depth: 1319 mm Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: FilterStufe2 L1020/300/2 – 4 pcs HEPA LH 1020/1 – 2 pcs

Condition: ready for operation (used), Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Manufacturer: GTI Glob Tec Model: GT 40L Dimensions: 1374 x 857 x 2283 mm Weight: 400 kg Airflow rate: 4000 m³/h Iasdpoy Ezbasfx Aqusu Electrical power: 3.7 kW Max. 400 V; 50 Hz Total filter surface: 38.9 / 108 m²

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Length: 4000 mm 2x cardboard filters Pint Stop filters Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW Iaodpfoyh E Hnex Aqusu CE marking

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 Iajdou T Hrpspfx Aqusu ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Edge extraction with fan Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Iasdpfsyuf S Hex Aqueu Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: excellent (used), Dust and mist extractor IMAS Ijdjyw Hrbopfx Aqusau

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Iaedpjy R Aldofx Aqusu Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Ijdoyn Rkuopfx Aquoau Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: excellent (used), functionality: fully functional, Olimpia SE3BSTD spray booth wall Length: 3000 mm 2x cardboard filter Ijdpjy Rmyxefx Aqueau Pint stop filters Filtration capacity: approx. 11,000 m3/h Motor power: 2.2 kW CE mark Dimensions: 335x150x238 cm (H)

Condition: excellent (used), Year of construction: 1997, Hurrican Dambauer complete paint spray booth system Iedpfx Asy Sv Alequeau

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h Iodpfsy Nikkex Aqujau year of production 2022 CE marking

Condition: excellent (used), Servatechnik extraction Ijdpfx Asx Nbnnequjau