Used Airless Paint Sprayer for sale (3,788)

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Nlsdpfxjy A Tpqe Amyod Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Nledpezinzljfx Amyjd Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. Nlsdpof Aad Njfx Amyjd The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm Nodpfethcflex Amyjld The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: used, Year of construction: 1997, rate of flow 34 l/min 28 : 1 Nledpfx Ajd Ih R Hsmyod 7 bar

Condition: new, Year of construction: 2026, BITUMEN EMULSION SPRAYER ABS-8000 Bitumen Emulsion Sprayer ABS 8000 – is the optimal equipment for performing large volumes of work in the shortest possible time. Autonomous diesel engine makes it possible to install the equipment on any truck. Theelements of control are located on a separate panel in the driver’s cab with partial redundancy in the control cabinet, which facilitates the adjustment of equipment and the transition of its working bodies from the transport to the working position. High quality bitumen pump and shut-off valves ensure trouble-free operation of the equipment. SPECIFICATIONS Density of surface coating – from 100 g / m2 to 1600 g / m2 Spraying width – from 2 m to 3.7 m Cleaning system. Tank capacity 8000 l. Function of tank self-pumping. Spraying barblowing by compressor. Rear view camera with monitor in driver’s cab. Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver’s cab. The system for heating the bitumen emulsion with a diesel burner (Italy). Spraying rod control equipment (lowering and expanding) by means of a remote control in the driver’s cab and on the vehicle body. REQUEST A CALL Buy BITUMEN EMULSION SPRAYERS TM TICAB – the best decision for you! Our price is competitive today and tomorrow. Specifications: Density of surface coating – from 100 g/m2 to 1600 g/m2; Nlodpfxsvpt Dcs Amyjd Spraying width – from 2 m to 3.7 m; Cleaning system; Tank capacity 8000 l; Function of tank self-pumping; Spraying bar blowing by compressor; Rear view camera with monitor in driver's cab; Bitumen emulsion spraying dosing control (g/m2) via touch screen display in driver's cab; The system for heating the bitumen emulsion with a diesel burner (Italy); Spraying rod control equipment (lowering and expanding) using a remote control inside the driver's cab and on the sprayer body.

Condition: used, pressure 3 - 6,5 kg / cm² bar rate of flow 26 l/min diameter of die - min./max. -- mm Ratio 73 : 1 rated current 1,65 KW weight of the machine ca. 100 kg Nlodpfjgvkliex Amyed dimensions of the machine ca. 730 x 760 x 1200 mm noise level 78 dB(A)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, workpiece weight (max.): 750 kg, working width: 380 mm, working height: 950 mm, input voltage: 400 V, power: 2.5 kW (3.40 HP), IPM380 Industrial Brushing Machine – For Planing Mills and Large Timber Construction Wherever even more performance or convenience is required, the hybrid brushing machine IPM380 steps in. This machine delivers results that are hard to match: 8 axes, infinitely adjustable, paired with 4 different brush types that can be finely tuned for outstanding finish quality. Your advantages at a glance: Nlsdpfxjw Av T Es Amysd Fast: 20–120 m/min feed speed Minimal downtime: 5 minutes setup // 20–45 minutes full cleaning Solid PP material: Almost nothing sticks – easy to clean Hybrid design: Can be converted into a profile spray machine using a quick-swap insert Durable: Made in Denmark, electronics from Germany Expandable: With matching drying technology, automation, and sanding units – we supply complete finishing lines Expert support: We know what we’re doing – and we’re here to advise and assist so that you’re 100% satisfied And for those who need more: We also build this model series in larger formats: 640 mm height × 380 mm width 1,300 mm height × 900 mm width What configuration do you need? You’ll find more details on the Bruhn Lackieranlagen website as well as in the attached video. And of course, we’re personally available to assist you. Simply get in touch to receive a solution tailored specifically to your needs. We look forward to impressing you!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, working width: 400 mm, total length: 2,150 mm, total height: 1,600 mm, total width: 1,000 mm, working height: 950 mm, input voltage: 400 V, year of last overhaul: 2025, power: 1.5 kW (2.04 HP), warranty duration: 12 months, compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. Nljdjffc Rajpfx Amysd You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Nledpfexr Rbmox Amyjd Air consumption 3500 m³/h Motor output 1,5 kW weight of the machine ca. 150 kg

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Max. working thickness: 60 mm Njdezmmulopfx Amysld Number of painting guns: 4

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call. Nlsdpfxoyx Sv Ue Amyed

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² Nlodpfxoyhbggj Amysd - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Nledjwu Aa Nopfx Amyod

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Nedpfx Aey Tiaasmyeld Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 250 mm, Coating machine / brushing machine Manufacturer: Ceetec Type: A 250 Coating machine with brush applicator Workpiece dimensions: Width max. 250 mm Height max. approx. 100 mm Length from approx. 800 mm The coating machine is suitable for applying paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Nsdpfxeyuaptj Amyold Technical data: - Electronic diaphragm pump (no compressed air required) - Spray nozzles for all-round application of wood preservatives - 12 rotating applicator brushes on 8 axes (standard: nylon bristles) for 4-sided application of coating agents Workpiece feed adjustable via feed roller, approx. 16-45 m/min. Capacity approx. 960 – 2500 meters/hour Power connection 3 × 380 V EU Machine weight approx. 350 kg Machine currently cleaned and technically inspected. Hose connections, diaphragm, and brush set will be replaced! Delivery time: approx. 1 week

Condition: used, Year of construction: 2000, power: 157 kW (213.46 HP), Equipment: all wheel drive, cabin, More data and images will follow! More photos and details coming soon! -----Internal vehicle number: 12255 Errors and prior sale excepted. Nodpfx Ajw Nfb Romyold

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Nlodpfx Ajw Tl S Demysd

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, Line marking machine: + Graco + LineLazer Striper GM5000 + Airless + Honda GX 160 engine, 5.5 hp + Gun Receive notifications about all newly added vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale! Nljdpfx Ajzmtktjmyjd

Condition: as good as new (ex-display), Year of construction: 2026, The outstanding advantages: Space-saving, compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air deflectors – also suitable for larger workpieces. Separation rate of paint mist up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in a long filter life! Easy and quick filter change on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray wall made of galvanized steel sheet with welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan incl. throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in consumption. The IPE dual filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats, thanks to its folded filter pockets. The subsequent fiberglass secondary filter only absorbs the finest residual particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors at the floor level or from floor pits. Thanks to this additional intake opening at the bottom, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also makes filter changes easier. Nedpfx Amocnz Iqsyeld Standard extraction capacity Easy Paint 3500 Item No. 600025 Airflow rate with standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Connection fitting for extraction hose D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine at a special price.

Condition: new, Year of construction: 2026, Variable, adjustable painting turntable • Numerous adjustment options for small and large, solid workpieces Nledpfxebzmage Amysd • Stable • Can be operated by one person; rotatable with fixed outriggers and adjustable swivel arms • Height-adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality product Can be shipped by us via UPS. Assembly is required. Location: In stock at Bitburg warehouse.

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints Nlodpfx Aobu Dziomyed - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Condition: new, Year of construction: 2026, Rehnen Spraying Table Lacky The advantages: Thanks to its arms, which can rotate 360°, it always provides the best support and a good surface for all workpieces. Easily adjustable in height and rotatable by 360° for quick and efficient work. Thanks to its covers, even after intensive use, the arms can still be moved. Nljdpfelrrrmex Amyed Height in mm: 950-1250 Width in mm: 600-1120 Length in mm: 700-1260 Diagonal in mm: 900-1680 Load capacity in kg: 100 Location: in stock – available immediately.

Condition: as good as new (ex-display), Year of construction: 2026, The compelling advantages: Space-saving, compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area due to air guide plates – making it suitable for larger workpieces. Separation rate of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Easy and quick filter replacement on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan including throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in operation. The IPE double filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² of filter area) due to the folded filter pockets than conventional filter mats. The downstream fiberglass secondary filter only captures the finest remaining particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only after every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors on the floor or from floor pits. Due to this additional intake opening facing downwards, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also simplifies filter replacement here. Standard extraction capacity Easy Paint 7000 Article number 600027 Air flow rate with standard delivery * 7000 m³/h Primary filter area 3.7 m² Nledpfx Aodqc U Hemysd Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Connection nozzle extraction hose D = 355 mm Width in mm 2845 Overall height in mm 1955 Depth in mm with capture area 1015 Weight in kg 180 Location: In stock in Bitburg Exhibition machine at a special price.

Condition: new, Year of construction: 2024, Advantages - Compact design, space-saving Nljdpfx Amjbpg E Eoyed - Powerful, high extraction capacity, low operating costs - Easy to maintain, long filter life - Universally applicable, variable accessories - High flexibility - Mobile design - Extraction technology with front plate system Technical data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Airflow: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg