Used Paint Removal for sale (8,187)

Year of construction: 2017, operating hours: 1,000 h, condition: used, functionality: fully functional, Probat Probatone 5 MK2, manufactured in 2017. The machine was ordered from Probat in 2017, installed in 2018, and used in production until the summer of 2024. Nwedpez E Rfijfx Af Sjl It comes with an optional drum speed control and a pilot roasting system (for automatic roasting). A temperature probe for measuring exhaust temperature is also included, which works with a USB stick and a third-party plug-in. Both bean and exhaust temperatures can be viewed in software such as Artisan. The machine has been cleaned and serviced according to the Probat maintenance schedule. After being removed from production, the machine was fully cleaned and serviced, including disassembly and cleaning of the cyclone, lubrication of the bearings, and cleaning of the electrode. Important: The machine has less than 1000 production hours, as indicated on the screen counter. After being removed from production, the machine was used for a few test runs in the summer of 2025. It is in full working condition but has a few scratches on the paint, as shown in the pictures. It is possible to test the machine on-site, and assistance can be provided with transport arrangements.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. Nodpjzwvb Asfx Af Sowl System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm Nsdpfx Ajzz Hp Ssf Sowl MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Nwedpsz D Ifqofx Af Sol Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Nwedjzyihhjpfx Af Ssl Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Conveyor extension at the machine outlet: 200 mm Sensor control Mechanical cap feeding system with floor-mounted storage container Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Nwsdpfx Afozhbqqj Sjl

Condition: used, Year of construction: 2009, Liebherr Crane 160 HC-L 8/16 incl. remote control: Nedpfx Aoz Edttsf Sjwl 160 HC-L 8/16, height: 37.5 m, jib length 55 m, works number 30349039, year of manufacture: 2009 incl. the following crane parts: 1 cross-shaped undercarriage 2 base ballast A 7.5 t 12 base ballast B 4.8 t 1 jib 611, 10.7 m 1 jib 621, 8 m 2 jibs 622, 10.35 m 1 jib 631, 5.18 m 1 jib 641, tip 1 base tower, 12.42 m 5 tower sections, 4.14 m "Completely refurbished, sandblasted and newly painted! This crane has been completely overhauled and is in excellent condition. Old layers of paint and rust were thoroughly removed by sandblasting before a high-quality new paint coating was applied. Subject to changes, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see our homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2017, operating hours: 23,009 h, functionality: fully functional, machine/vehicle number: 01559, TOMCO2 T-1500-P industrial dry ice pelletizer – 680 kg/hour PHOTOS TO FOLLOW.!!!!! Professional TOMCO2 T-1500-P Dry Ice Pelletizer, designed for industrial production of large quantities of dry ice. Nedjz Az Hdopfx Af Sewl TOMCO2 is a well-known American manufacturer of industrial CO₂ and dry ice equipment. According to the manufacturer, these machines are designed for reliable, continuous production and can be used for, among other things, dry ice cleaning, the food industry, transportation, and other industrial applications. Technical specifications: Manufacturer: TOMCO2 Systems Model: T-1500-P / 1500 Machine: industrial dry ice pelletizer / extruder Production capacity: 1,500 lbs/hour / approx. 680 kg/hour Drive: hydraulic Hydraulic drive: 30 HP Electrical connection according to factory specifications: 230/460 V, 60 Hz, 3-phase Control: color touch screen / HMI Dimensions: approx. 305 × 132 × 206 cm (L × W × H) Weight: approx. 2,722 kg Designed for 24/7 production Interchangeable dies Possible pellet diameters for the 1500 series: 6, 9, 12, and 19 mm The machine can be adapted for different pellet sizes thanks to interchangeable dies. TOMCO specifies diameters of 1/4", 3/8", 1/2" and 3/4" for the 1500/3000 series, which is approximately 6, 9, 12 and 19 mm. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO₂ cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO₂ blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 2019, condition: good (used), Sturm Coating System Description: For sale is a complete industrial Sturm robotic painting system, manufactured in 2019. This automated coating system was used for the serial coating of components and originates from an industrial production facility. The used painting line comprises, among other elements, a spray booth, drying and cooling zones, conveyor technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification unit. Thanks to its automated design, the robotic painting system is particularly well-suited for industrial applications in the automotive industry, metal processing, and serial manufacturing. Viewing at the Hamburg site is possible by appointment. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift (condition commensurate with age) System components: Processing units, drying and cooling zones, spray booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Nwsdpfx Afozka Sfj Sol Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal after-treatment / exhaust air purification system (VeniaKab / RNV) Condition Notes: Control technology: According to plant maintenance, it is state-of-the-art Electrical & mechanical systems: Mostly in good condition commensurate with age Cybersecurity / Data Deletion: For security reasons, all hard drives from the robots and PC-based stations have been removed. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, total width: 2,500 mm, total length: 5,600 mm, total height: 2,300 mm, type of input current: three-phase, feed length X-axis: 430 mm, feed length Y-axis: 1,500 mm, grinding spindle motor power: 20,000 W, overall weight: 7,400 kg, input frequency: 50 Hz, controller manufacturer: Sinumerik 840D sl, drive type: Siemens Sinamics S120, control type: CNC control, Schaudt precision for shafts up to 1500 mm in length and 500 mm in diameter – completely overhauled and modernized by Serwema Retrofit Solutions, Chemnitz. The PF5 is one of the most reliable external cylindrical grinding machines in its class: rigid bed, 20 kW grinding spindle, 600 kg between centers. Serwema completely rebuilds it, with a Siemens Sinumerik 840D sl, Sinamics S120, direct measuring systems in X and Z, and an automatic B-axis that swivels the grinding spindle from -45° to +225°: longitudinal, face, and taper grinding, shoulder grinding, and with an optional internal grinding spindle, also boring – in a single setup, without manual retooling. Proven Schaudt mechanics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, inspected in Chemnitz together with you. The user-friendly interface guides the operator through work piece, wheel, and cycle data screens without the need for programming. Marposs balancing and dressing systems reduce non-productive time and protect the grinding wheel; grinding wheels up to 600 mm in diameter and 125 mm in width with a peripheral speed of 50 m/s allow for high material removal rates during rough grinding and the finest surface finishes during finishing. Application areas: shafts, spindles, rollers, hydraulic pistons, and gear components in mechanical engineering, drive technology, the printing and paper industry, and contract grinding shops. Technical data: max. grinding length 1500 mm, max. grinding diameter 500 mm, work piece weight between centers 600 kg, max. grinding wheel Ø 600 mm, max. wheel width 125 mm, peripheral speed 50 m/s, grinding spindle power 20 kW, X-axis travel 430 mm, B-axis swivel range -45° to +225°. Dimensions approx. 5.6 x 2.5 x 2.3 m, weight approx. 7.4 t. Nedez E H Itopfx Af Sewl Scope of supply: new Siemens Sinumerik 840D sl control with Sinamics S120, air-conditioned switch cabinet manufactured in-house, direct measuring systems for X and Z, user-friendly interface, automatic B-axis, balancing and dressing (Marposs), machine enclosure with state-of-the-art safety technology, lubrication and hydraulic unit, new paint finish RAL 5015/7035, geometry inspection according to manufacturer's standard with protocol, operating manual. Options: internal grinding spindle, paper band filter with or without magnetic separator (Polo or Filtec), installation and commissioning, operator training.

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including small and very large projects. One advantage of this machine is that it doesn’t rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Cold Jet Applicator 2 x Nozzles – NEW One of the best machines in the world. It has no electronics, which is why it is so reliable. Furthermore, maintenance costs are relatively low. Nsdpfowg R Rmox Af Sowl For inquiries or to arrange a viewing, please contact us at Dr. Dryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Year of construction: 2000, - *Make / Model: BASKET RQG 18* - Italian manufacturer, Reggio Emilia - Spider lift - *Year: 2000* - Nwedez Dcb Tspfx Af Ssl - *Working height: 18 meters* - *Type: Tracked spider lift + hydraulic stabilizers* - *Weight: 2,800 kg* - Can pass through an 80cm doorway with the basket removed - *Engine: 8.43 kW* - Bi-fuel (electric motor 380V, visible in blue + internal combustion engine) - *Basket: 200 kg max / 2 people / 40 kg tools* - *Basket dimensions: 1.2m x 0.7m - 90° rotation* - *Outreach: ∼8.50m* - *Safety features:* 4 stabilizers with load sensors, 3° max tilt control, anemometer 12 m/s max, dual control station (base + basket) - *Tracks:* Rubber - hydraulic widening - *Condition:* As is, functional, ideal for cleaning / painting / rental. Basket needs cleaning / painting required.

Condition: new, Year of construction: 2025, warranty duration: 12 months, total width: 1,900 mm, total length: 1,800 mm, total height: 1,550 mm, SPRAY STRIPPING MACHINE – TECHNICAL SPECIFICATION 1. EXTERNAL DIMENSIONS Width: 1 800 mm Length: 1 900 mm Height: 1 600 mm 2. WORKING DIMENSIONS Width: 1 300 mm Length: 1 300 mm Height: 670 mm* 3. TECHNICAL CHARACTERISTICS Total power: 9.2 kW Heating power: 7.0 kW Pump power: 2.2 kW Njdpfx Afjghl Dzo Sswl Number of nozzles: 24 Fluid flow rate: 320 l/min Operating pressure: 4.5 bar Operating temperature: 85°C Construction material: AISI 316 (1.4401) acid-resistant stainless steel 4. TANK CAPACITY & HEATING SYSTEM Indirect heating medium: 167 l (±2%) Main tank capacity (stripping fluid): 480 l (±2%) Heating system: indirect heating jacket, separately controlled 5. MACHINE CONSTRUCTION Machine tank equipped with 4 adjustable legs for levelling. Control panel mounted on the machine base. Equipped with an industrial CLICK-CLACK quick-release connector. 6. CONTROL SYSTEM 2 × temperature controllers: One for the heating jacket One for the main processing tank Process time controller LED indicator lights for monitoring correct process operation. 7. DEVICE CAPACITY Suitable for 4–8 rims up to 23”. 8. PLATFORM GRATE Made entirely of acid-resistant stainless steel AISI 316 (1.4401). Serves as a durable, chemically resistant working area for placing rims or other items to be stripped. 9. ROTATING NOZZLE SYSTEM 2 Rotating Arms The machine features two rotating arms, each equipped with a section of the 24 specially engineered nozzles. Nozzles provide multidirectional, high-pressure spraying for fast and uniform paint removal. Designed for maximum coverage, including internal and hard-to-reach areas of the rim. 10. APPLICATION Spray stripping machines represent a modern and highly efficient method of removing paint from alloy wheels. Their use is increasingly appreciated in automotive workshops, tyre services and professional rim refurbishment facilities. Using this machine significantly improves working comfort by providing perfectly cleaned surfaces, allowing all further service operations to be performed faster and with higher precision. 11. KEY BENEFITS Ideal for rim refurbishment centres, tyre services and automotive workshops. Perfect stripping results thanks to counter-rotating spray nozzles. Extends the service life of other tools and machines due to improved pre-cleaning. Optimises employee working time and increases process efficiency. Ensures consistent, precise and repeatable stripping performance.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Nsdpfxszuzt Es Af Sowl Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901003047, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, next inspection (TÜV): 11/2026, total length: 15,350 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 265/70 R19,5, color: grey, Year of construction: 2022, length (extended): 15,350 mm, length (retracted): 13,850 mm, Equipment: EBS, tail-lift, The images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin 14 pairs of lashing eyes recessed into the outer frame, 2.5 to each 24 to two-speed landing gear, single-side operation, with straight lower section, without lateral compensation 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mud flaps behind each axle Rear corner protection 2 spare wheel carriers for 1 spare wheel, with wheel mounting kit 1 x for semi-trailer wheel and 1 x for truck wheel Spare wheel, make at manufacturer's discretion 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm Nwjdpfx Afjz E Rqrj Sjl 1 document box at the front bulkhead #Telescopic extension Central tube frame with neatly welded, interlocking telescopic frame sections Extendable by max. 1,500 mm and lockable after approx. 1,500 mm; exact dimension specified by EMPK; outer frame sections approx. 1,500 mm long for engagement in the outer frame when telescoped Locking by mechanical locking pin #Axles + suspension Drum brake axles, make at manufacturer's discretion Air suspension #Braking system Dual-line compressed-air braking system Spring-applied parking brake 2 non-interchangeable red/yellow brake coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lift and lower valve #Wheels and tyres 265 / 70 R 19.5, make at manufacturer's discretion Steel rims in twin configuration, factory silver #Electrical system 24 Volt, multi-chamber lamps, yellow LED side lighting 2 white front position lamps 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cables 1 rotating beacon with holder, switched via side lights (removable lamp) 1 additional 7-pin socket (ISO 1724) in the rear underrun protection #Floor Approx. 30 mm thick phenolic resin-coated plywood panels, suitable for high point loads, for forklift axle loads up to max. 7,100 kg Steel/tread plate covering in the wheel arch area where required #Front bulkhead / front corner posts 25 mm aluminium hollow profile, 1,800 mm high, heavy-duty steel corner posts #Side boards 25 mm aluminium hollow profile, 600 mm high (manufacturer's choice), folding down and removable #Centre posts Pair of folding posts at side-board height, folding down and removable #Rear wall / rear corner posts Pair of folding or plug-in posts, at side-board height, removable 25 mm aluminium hollow profile, at side-board height, folding down and removable #Approval / signs Country of registration: Germany With DEKRA inspection and report Prepared for single-line number plate holder 1 warning panel in accordance with ECE 70 White reflective strips: on the sides of the side boards Red reflective strips: continuous around the rear wall #Paint finish Frame: DB 7350 Novagrau Landing legs: black coated Front corner posts: hot-dip galvanised Front bulkhead: anodised aluminium Side boards: anodised aluminium Centre posts / corner posts: silver

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,100 mm, total length: 1,500 mm, total height: 2,400 mm, 🇬🇧 WHEEL PAINT STRIPPING TANK — TOP SALES | ULTRA PREMIUM BUMEX Sp. z o.o. — Industrial Chemical Stripping Technology Professional industrial stripping tank designed for intensive chemical removal of powder coatings, industrial paints and solvent-based coatings from aluminium and steel wheels as well as various metal components. Engineered for maximum process efficiency, operational safety and long-term continuous industrial use. Technical Data Working basket dimensions: 1200 × 1200 × 700 mm (simultaneous processing of up to 8 wheels). Chemical capacity: approx. 1200 litres. Construction materials: process tank — acid-resistant stainless steel AISI 304, external housing — stainless steel. Thermal insulation: fully insulated tank — 50 mm (high temperature stability and reduced energy loss). Standard Equipment ✅ indirect heating system via oil heating jacket for uniform temperature distribution, ✅ automatic heating medium temperature control, ✅ ceramic heating elements in acid-resistant protection tubes — 4 × 3.5 kW (14 kW), ✅ mixing system supporting uniform chemical circulation throughout the tank, ✅ fully stainless steel process basket, ✅ heavy-duty loading frame for safe lifting and lowering of the load, ✅ industrial control panel with LED status indicators and safety protection systems, ✅ fully enclosed stainless steel construction resistant to aggressive chemical environments. Key Advantages ✔ uniform heating of the entire chemical volume — no local overheating, ✔ high process efficiency with optimised energy consumption, ✔ designed for continuous industrial operation, ✔ excellent chemical and thermal resistance, ✔ ergonomic loading of wheels and large components. BUMEX Quality Standard Njdpfxsfmf Izo Af Sjwl CE conformity, full technical documentation, manufacturer warranty — 12 months, warranty and after-sales service, professional technical consulting. Commercial Terms ✔ short delivery times, ✔ customised configurations and dimensions available, ✔ own transport — individually priced, ✔ VAT invoice provided. BUMEX Sp. z o.o. — Industrial solutions engineered for reliability, safety and long-term performance.

Condition: used, Used Equipment Features and Technical Specifications: - The convenient Varioflex shelving cart is designed for the flexible and gentle storage of painted workpieces. - In addition, its 4 swivel casters also allow for the transport of workpieces. - Its sturdy tubular frame construction is adjustable from 200 to 2000 mm. - With 17 inner and 17 outer support tubes on each side, the cart can support weights of up to 400 kg with an evenly distributed load. - The plug-in inner and outer support tubes can be removed as needed and reinserted from the rear. - When not in use, the rack cart can be nested to save space. Optional Accessories: - Plastic-coated support tubes - Additional rakes Technical Specifications: - Length: 200–2,000 mm - Depth: 870–1,180 mm - Height: 1,855 mm - Support tube length: 650 mm extended to: 1,150 mm Clear spacing between tubes: 70 mm Load capacity: 400 kg Availability: available shortly Nwsdpozk Npaofx Af Sol Storage location: Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Nwjdpeun R Ufsfx Af Sjl Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: refurbished (used), Year of construction: 2015, operating hours: 33,630 h, ASCO A120P Dry Ice Pelletizer – Refurbished We have various new parts in stock for Cold Jet machines. Nwjdpszquixjfx Af Sel A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transport. Specifications Brand: ASCO Type: A120P Operating hours: 33,630 hours Ready for immediate use Major maintenance performed (2024) The machine underwent extensive maintenance by ASCO Germany in late 2024. During this process, several critical wear parts were replaced, and the press unit was refurbished. Among the parts replaced: ✔ New press chamber kit ✔ New piston ✔ New guide bushings ✔ New sintered bushing ✔ New hydraulic filter ✔ New solenoid valves ✔ New pressure regulator (latest version) ✔ Hydraulic valve replaced ✔ Various springs ✔ New seals ✔ Various fasteners Service documentation available The machine comes with the original documents, including: Original ASCO service report Test results after maintenance This confirms that extensive refurbishment work was carried out on the press chamber and hydraulic components. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine to buy, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient Nodoc Uthxopfx Af Sjwl ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: good (used), Year of construction: 2000, functionality: fully functional, LA MACCHINA UTENSILE s.r.l. – FVA 20" PR 180° Automatic wheel brushing machine for processing and deburring aluminum rims. Technical data Manufacturer: LA MACCHINA UTENSILE s.r.l. (Italy) Model: FVA 20" PR 180° Serial number: 2100 Year of manufacture: 01/2003 Machine weight: 3,000 kg Mains voltage: 400 V Frequency: 50 Hz Connected power: 19 kW Rated current: 40 A Max. operating pressure: 50 bar CE marking: Yes Machine description Automatic brushing machine for the post-processing of aluminum rims Processing of rims up to 20 inches Two opposing brush units (top/bottom) Digital adjustment of: Brush speed (top) Brush speed (bottom) Brush current (top) Brush current (bottom) Automatic rotary table / workpiece positioning Pneumatic or hydraulic workpiece clamping PLC-controlled processing Application area The machine is used for: Removing burrs Cleaning wheel contours Brushing the spokes Surface finishing after casting or machining Preparation before painting or final inspection Nedjw Rrwzepfx Af Sowl

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, feed rate X-axis: 3 m/min, workpiece weight (max.): 500 kg, working width: 1,300 mm, type of input current: AC, volume flow: 12,000 m³/h, suction capacity: 6,000 m³/h, compressed air connection: 6 bar, A fully automatic coating system in excellent condition is offered for sale, consisting of the following components: 1 -----VEN SPRAY SMART Spray System----- Year of manufacture: 2019 Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920 ± 20 mm Nodpozcmy Ujfx Af Sswl Working width: 1,300 mm Min. workpiece size: 300x100x10 mm Max. workpiece size: 3,600x1,200x50 mm Coating material: Water-based paints, solvent-based paints Spray process: Air, Airmix, Airless 326 operating hours 2-----VEN MOVE TRANSFER----- Type: VEN MOVE TRANSFER 180° Year of manufacture: 2022 Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3 -----VEN TRANS BELT (x3)----- Type: VEN TRANS BELT belt conveyor Year of manufacture: 2022 Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours 4 -----VEN TRANS BELT with dust protection hood----- Type: VEN TRANS BELT belt conveyor Year of manufacture: 2022 Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920 ± 20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 5 -----VEN MOVE TRANSFER with drying chamber----- Type: VEN MOVE TRANSFER with drying chamber Year of manufacture: 2022 Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber: Manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h 6 -----Supply air unit HC12----- Manufacturer: Berliner Luft Recirculation air volume flow: max. 12,000 m³/h Max. heating temperature / heating capacity: 70°C / 174.14 kW 1620 operating hours -----Technical Features----- - Fully automatic coating process - Multi-layer coating programmable - Automatic control of the entire coating process - 6 freely programmable spray guns - Suitable for water-based and solvent-based paints - Suitable for automated coating processes in industrial applications The system was installed in 2022 and was in operation for only about 1 year (326 operating hours in the spray gun drive). It is in very good condition, is fully documented and is ideal for industrial coating processes with high quality requirements. The original investment value in 2022 was approximately €760,000. The selling price is negotiable.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, heating capacity: 22 kW (29.91 HP), total width: 1,070 mm, total length: 1,555 mm, total height: 1,058 mm, warranty duration: 24 months, Equipment: crane, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 6-8 weeks after payment receipt 📦 Please also inquire about the current stock availability. ➖➖➖➖➖ ⭐ Proton BSK Paint Stripping Tank – BSK-1200-700×700 PROFESSIONAL SOLUTION FOR CHEMICAL PAINT STRIPPING! The BSK-1200-700×700 paint stripping tank was developed for the simple and safe removal of paint from workpieces, suspension devices, incorrectly coated parts, or parts to be reworked. The heated tank can be operated with various suitable paint stripping chemicals. The selection of materials and design depends on the chemical used and the process conditions. ☘️ Easy to use ☘️ Clean working environment ☘️ Fast solution ✅ Heated paint stripping tank ✅ Suitable for powder and wet coating processes ✅ For suspension devices, workpieces, and incorrectly coated parts ✅ Automatic thermostat for temperature control ✅ Digital timer with signal at the end of the process ✅ Hinged lid to reduce vapor distribution in the work area ✅ Drainage via stainless steel ball valve ✅ CE-compliant design ✅ Various optional extras available ➖➖➖➖➖ Technical Specifications: ✔️ Model: BSK-1200-700×700 ✔️ Usable dimensions: 1200 x 700 x 700 mm ✔️ Internal dimensions: 1270 x 770 x 820 mm ✔️ External dimensions: 1380 x 880 x 1058 mm ✔️ Max. filling capacity: approx. 724 L ✔️ Heating power: 4 x 5.5 kW ✔️ Installed power: approx. 22 kW ✔️ Rated current: approx. 31.8 A ✔️ Recommended fuse: 50 A ✔️ Exhaust fan: 1 x 1.5 kW ✔️ Exhaust connection: Ø250 mm ✔️ Average heating: approx. 15.4 kWh/h in the first 3 hours ✔️ Average consumption: approx. 62.8 kWh / 8 hours ➖➖➖➖➖ Material design and chemical resistance: As standard, the components in contact with the media, such as the tank interior, workpiece basket, and filter unit, are made of V2A / AISI 304 stainless steel. Depending on the chemical used and the process conditions, these components can also be optionally manufactured from V4A / AISI 316 stainless steel. V4A is particularly required for aggressive, chloride-containing, or highly corrosive chemicals. For the correct material selection, please provide the technical data sheet or the chemical composition of the intended paint stripping agent before preparing the quote. ➖➖➖➖➖ ⚙️ Optional available extensions Njdpfx Afofw Nvxe Sjwl ✅ Stainless steel immersion basket ✅ Drip tray ✅ Crane support and crane ✅ Paint stripping/cleaning booth ✅ Pneumatic lid opening ✅ Stainless steel mixer ✅ Exhaust hood with explosion-proof fan ✅ Special sizes and individual designs available upon request ➖➖➖➖➖ Other BSK paint stripping tanks in various sizes are available. The dimensions and technical data of the other models can be found in the attached catalog. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire purchase, or installment options. Special sizes or individual designs are possible upon request. We will gladly plan a suitable solution for your paint stripping processes. Request a quote now – make your paint stripping cleaner, faster and more professional!

Condition: new, Year of construction: 2025, FILTER WITH A MEMBRANE PUMP !!! A bathtub for removing the varnish coat from rims and other objects covered with various types of paints, solvent varnishes and powder varnishes. Basket working dimensions (mm): 1250 x 800 x 700 mm * The bathtub is made of high-grade 304 acid-resistant steel. * Insulated on all sides with 40 mm insulation material, it allows us to efficiently and quickly heat the liquid to the desired temperature. * The shell of the device is made of stainless steel. Equipment of the device: - Indirect heating (heating mantle), - Automatic temperature control of the heating medium, - Baskets made entirely of stainless steel, - LED indicator lights, - Ceramic heaters in the cover of 2 x 4,5 kW acid-resistant pipes, - Aeration system for the entire bottom of the bathtub, - 12-month warranty. Our devices are made with great care and attention to detail. Nwjdsgwg Haspfx Af Sel CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Nwodpfx Aozi D T Dof Sjl Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours