Used Paint Drumming for sale (6,384)

Condition: used, Year of construction: 2020, operating hours: 3,000 h, Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4 Cpjdpfx Aajygu Rvj Esw Roller width: 2130 mm

Condition: good (used), Paint mist extraction DIT-FNA 20/18 - with upper and side guide plates - 2.7 kW Codpfjyrnyhox Aa Espw - 380 Volt

Condition: good (used), Vibratory finishing system, vibratory finishing machine, vibratory finishing drum, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, vibratory finishing bell, rotating bell, drums, bells, vibratory finishing -Manufacturer: Max Spaleck, vibratory finishing bell -Type: SC 2 -Speed: 15/32 rpm Cpjdpfxsx Nfyno Aa Eew -Filling weight: 180 kg -Filling opening: Ø 265 mm -Accessories: incl. 127 kg of vibratory abrasive material (see photos) -Machine for: Deburring, polishing, edge rounding -Transport dimensions: 1515/800/H1400 mm -Total weight: 294 kg

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Codpfevnmcvox Aa Eopw

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Codpfx Aasyqynue Eopw External reference: 7615

Year of construction: 2000, condition: used, Condition: used Location: Bremen Manufacturer: Heinkel Type: HF 300 Year of manufacture: 2000 Filling volume: 6.5 L Drum diameter: 300 mm Max. speed: 3000 rpm-1 Material of product-contact parts: V4A / 1.4571 Complete control system & comprehensive documentation available Product data Volume: 6 liters Overall height: 1,850 mm Overall length: 2,700 mm Cpjdpfx Asypizbea Esw Overall width: 1,100 mm Remarks 1 attachment on pallet; this attachment was not included in the stated dimensions.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Cjdpfxexmlinj Aa Ejpw

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) Cpsdoyrr Rqopfx Aa Eow 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, Automatic door painting line comprising: Automatic door destacker, door by door Automatic painting robot with spraying Door stacker onto trolleys Cpodpfx Aasyrr Dke Eew Door dimensions: lengths from 2000 to 2600 mm widths from 730 to 1030 mm

Year of construction: 2025, condition: new, Dimensions (L/W/H) 940x640x136 mm Cpodov A Hzbopfx Aa Esw Weight 96 kg Total power requirement 1,5 kw

Year of construction: 2013, operating hours: 200 h, condition: good (used), functionality: limited functionality, General Characteristics of KALTENBACH Equipment Csdpfoyrfv Tex Aa Espw 1. Drilling / Profile & Plate Processing Machines Function: Precise drilling of steel profiles and plates, threading, countersinking, and marking. Suitable for pipes, profiles, and plates with complex hole patterns. Features: - CNC control for high precision. - Automatic tool changer for multiple operations. - Servo motors and ball screws ensure accuracy. - Multi-axis spindle for flexible operation. Purpose: Preparation of holes and welding points in metal structures. 2. Cutting / Band Saws and Saw Lines Function: Straight and mitre (angled) cutting of steel profiles, tubes, and plates. Features: - Band saws or circular saws. - Mitre cutting capability. - Automated conveyor systems for efficient material handling. Purpose: Production of structural elements and construction parts. 3. Shot Blasting Systems Function: Removal of rust, scale, and contaminants from metal surfaces. Features: - High-speed shot blasting turbines. - Configurations for profiles, tubes, and plates. - Robust construction for continuous, high-throughput operation. Purpose: Surface preparation before cutting and painting. 4. Painting and Surface Treatment Systems Function: Application of primer and top coats to protect metal surfaces and enhance appearance. Features: - Painting booths and robotic spray systems. - Integrated drying units. - Conveyor and transfer systems for continuous workflow (blasting → painting → drying). Purpose: Corrosion protection and achieving a professional surface finish. Overall Characteristics - Modular and customizable system configurations. - CNC control and automation enhance productivity and precision. - High throughput and industrial-grade accuracy. - Complete production line integration: cutting → blasting → painting.

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. Cpjdpfjyrffhox Aa Eow The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm Cpsdpfoym Rvbsx Aa Eew power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 209981-002-2018, pressure (max.): 448 bar, WIWA Airless 28064 Delivery rate DH: 153 cm³ Transmission ratio: 64:1 Max. material temperature: 80 °C Max. operating pressure: 448 bar Max. inlet pressure: 7 bar Weight: 80 kg Serial no.: 209981-002-2018 Cjdsyqx Utjpfx Aa Espw Further information available on request.

Condition: new, CATALOG NUMBER MR001 Cedpfex Uz Rmsx Aa Eopw - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2021, operating hours: 2,500 h, manufacturer: MDS year of construction: 2021 type: MDS 515 length: ca. 5.500 mm diameter: ca. 1.500 mm hours: ca. 2.500 h engine: CAT 4.4 96 kW weight: ca. 48 to capacity: ca. 500 to/h top condition, as good as new Csdper Nb U Sefx Aa Ejpw with 2 screen drums Screen opening 1. trommel: 0/200 mm - 10/60 kg, 60-300 kg Screen opening 2. trommel: 0/30 mm, 30/80 mm ca. 13m³ Bunker

Condition: excellent (used), Year of construction: 2019, Type: TS 1.8x10.5 Year of manufacture: 2019 Only approx. 2,900 hours, TOP condition Length: approx. 10,050 mm Diameter: approx. 1,800 mm Fractions: 4 plus riprap / oversize material Csdpox Ei Sgsfx Aa Eopw Screen 1: 100x100 mm mesh, product 0-100 mm Screen 2: 120x200 mm mesh, product 63-180 mm Screen 3: 270x270 mm mesh, product 5-40 kg (90-250) Screen 4: 420x340 mm mesh, product 10-60 kg

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed Cpsdpfx Aajymnnho Eew variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel Cpjdjymnnbspfx Aa Eow adjustable speed mobile outfeed conveyor belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm Cpsdpeu Rl Ruofx Aa Ejw max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Condition: used, Year of construction: 2020, operating hours: 108 h, Used vehicle Cedsyn Uq Eopfx Aa Espw Vehicle No. 3205, Hamm HD 8 VV, year of manufacture: 2020, operating hours: 108, articulated steering, rollover protection bar, Kubota diesel engine with 16.1 kW, unladen weight: 1,450 kg, operating weight: 1,590 kg, drum width: 800 mm. Please note for inquiries: errors and interim sale reserved.

Year of construction: 2018, condition: used, Fully functional Spanish (RECALOR) sawdust dryer Cpodpfx Asv Rfuvea Ejw Chip quantity at dryer outlet approx. 12,000 kg/h (10% w.b.) Selling because we built a more efficient one

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber Cpsdpfx Asc Spguoa Esw 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Cpodpfx Aozdr Tsa Eow Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert AUTO compaction cycles Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Press, Barrel Compactor for Metal drums / Plastic drums

Condition: used, Used O'Hara Technologies model Labcoat IIX 316 stainless steel coating pan system. Unit has (1) 762mm diameter perforated drum, (1) 482mm diameter drum & (1) 381mm diameter drum. Approx batch sizes range from 1kg to 40kgs. Unit has local controls. Unit includes Servolift units for drum handling. Codpfsyma Dnsx Aa Ejpw