Used Paint Sprayers for sale (4,027)

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables Iiedpfx Aef Aad Nebnsf

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers Isdethcflopfx Abneif (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Iiedpfxjc R Iyaj Abnsf Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: Isdpfxezuzt Ej Abnsif - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Roller coating and puttying machine Technical data - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm Iiedpfx Abjzuzrhonsf UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Iiodpfezuzqdjx Abnsf Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, - SCM DMC System / E83 2000 sanding machine - Superfici Transporto conveying system - 2x Superfici Valiorta F1 B painting machines - 2x Superfici UV drying units Painting line Manufacturer: SCM/Superfici Painting line consisting of: Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Conveying system Manufacturer: Superfici Type: Transporto Year of manufacture: 2022 2x painting machines Manufacturer: Superfici Type: Valiorta F1 B Year of manufacture: 2022 2x UV drying units Manufacturer: Superfici Ijdpfxjzuzkke Abneif Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Iodpfezuzg Sox Abneif Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Iiedpfewu Aa Nex Abnef Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: good (used), Year of construction: 1995, Roller laquered line, Iiodozu A Rljpfx Abnjf 2 Roller giardina for oil 2 spreding brush 3 Roller hymmen 2 UV dryers About 20m length line Also i have 3 new UV lamp All this for 9800 euro

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Iijdpewu Ackefx Abnef Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Iisdjw Idbyjpfx Abnsf Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1

Condition: used, Year of construction: 2014, machine/vehicle number: A14 02 009-0040, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm Iiodpfxoztf Nhs Abnsf - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left - Suitable for solvents and water-based coatings - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Iisdpoytgpqofx Abnsf

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Iedpfx Abstpp H Ejnsif

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Isdpfx Aowydgzobnsif

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Iijdpfstxnp Nex Abnsf

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices Iodpfxozubtlj Abnsif • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Iijdpfozinzlox Abnsf Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2026, Bitumen Emulsion Sprayer BS‑200 – 200 L Asphalt Distributor | Road Construction Equipment The BS‑200 bitumen emulsion sprayer by TICAB is a compact, reliable, and easy‑to‑operate bitumen sprayer / asphalt distributor designed for road repair, resurfacing, and surface priming before asphalt laying. With its 200 L capacity, this unit is ideal for small‑to‑medium road maintenance jobs where precise and uniform spraying of bitumen emulsion is required. Key Features 200 L bitumen emulsion sprayer – compact and efficient Uniform and accurate spraying for road surface treatment Smooth operation for asphalt maintenance, patching, and repair Ideal for roads, parking lots, driveways, and pathways Portable design that can be mounted on a trailer or platform Reduces material waste with controlled dosing and spray flow Technical Specifications Tank capacity: 200 L Effective emulsion spraying system for even coverage Can be mounted on frame or trailer at customer request Heating system for bitumen emulsion Self‑pumping tank function 3‑level cleaning system (diesel fuel) Manual spray rod for targeted application Optional connection for external compressor to clean spray bar Iiodpjvphitjfx Abnjf Applications Precise bitumen emulsion spraying before asphalt paving Asphalt road repair and maintenance Tack coat / prime coat application Parking lots, sidewalks, driveways Municipal and contractor roadworks The BS‑200 Bitumen Emulsion Sprayer from TICAB is an efficient and cost‑effective solution for companies seeking a small asphalt sprayer that delivers consistent performance, accurate emulsion distribution, and reliable road surface preparation. Condition: new Manufacturer: TICAB Delivery: worldwide

Condition: new, Year of construction: 2026, Bitumen Sprayer+Crack Sealer 2in1/ BM Combo (Without trailer) Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BM-Combo runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic Iedjvptd Nspfx Abnjif CRACK SEALER 1. Bitumen tank – 120L 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Condition: new, functionality: fully functional, Year of construction: 2026, BS-500 PRO Iiedjvuaccjpfx Abnsf Even the best road coating wears during exploitation. Heavy traffic, unfavorable weather conditions, and other factors negatively affect the asphalt. Bitumen pressure distributor BS-500 PRO – is the number-one equipment to protect the load-bearing structure of the road with surface treatment. The model has a safe and inexpensive heating system, responsible for maintaining the required temperature of the emulsion. The 500-liter emulsion tank is insulated with solid mineral wool. Technical Specifications Engine power (petrol, air cooled)-4.3 kW (5.8 hp) Emulsion tank capacity-500 l Productivity-28 l/min Nozzles on the spraying bar- 7 pcs Spraying width-1.7 m Diesel cleaning system Spraying bar is modularised, consisting of 3 sections, with rubber protection plates that protect against contamination and emulsion in unplanned areas Remote control of the spraying bar Electric starter Tank self priming function Emulsion tank heating system Ability to connect a third party compressor for cleaning the spraying bar

Condition: new, functionality: fully functional, power: 10.4 kW (14.14 HP), gearing type: other, fuel type: diesel, color: green, axle configuration: 1 axle, emission class: none, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BM Combo – Two Machines in One. Maximum Efficiency on Every Road Project. The TICAB BM Combo is a powerful dual-function bitumen machine engineered for professional road construction and maintenance. It combines a 750 L bitumen emulsion sprayer and a 120 L crack sealing unit in one compact, trailer-mounted solution — giving contractors and municipalities everything they need to work faster, smarter, and more profitably. 🚀 Why TICAB BM Combo Increases Your Profitability ✔ 2-in-1 System – Save money by replacing two separate machines with one high-performance unit ✔ Faster Job Completion – Spray and seal with maximum efficiency ✔ Precise Application – Uniform coverage ensures professional results ✔ Reduced Operating Costs – Diesel engine with hydraulic system for reliable, energy-efficient operation ✔ Built for Heavy-Duty Work – Designed for demanding municipal and industrial projects Key Advantages 750 L bitumen emulsion sprayer + 120 L crack sealing unit Automatic temperature control for optimal material performance Hand wand and wide spray bar for flexible application Fully mobile, trailer-mounted design for quick transport between sites Rugged construction for long-term, intensive use Diesel-powered engine with integrated hydraulic pump & heating system Flushing system for easy cleaning and maintenance Ideal For: Road and highway construction Asphalt paving preparation & tack coat application Pothole repair and crack sealing Surface dressing & waterproofing Municipal roads, parking lots, industrial zones, airports, bike paths, and more Why Choose TICAB? With one machine, you reduce equipment costs, minimize downtime, and maximize productivity — all while delivering flawless asphalt and bitumen application. Manufactured by TICAB – a trusted European road equipment brand, the BM Combo is engineered for professionals who demand reliability, efficiency, and long-term performance. Iijdpfxox U Am Ns Abnef 📞 Get Started Today Contact us now for pricing, availability, delivery options, and full technical specifications.

Condition: new, functionality: fully functional, gearing type: other, color: orange, empty load weight: 2,000 kg, emission class: none, brakes: other, suspension: other, Year of construction: 2026, loading space length: 5,110 mm, loading space width: 2,106 mm, loading space height: 1,870 mm, driver cabin: other, Equipment: additional headlights, hydraulics, low noise, TICAB ABS-8000 Bitumen Emulsion Sprayer | 8000 L High-Capacity Asphalt Spraying Machine Take your road maintenance and paving operations to the next level with the TICAB ABS-8000. Built for demanding, large-scale jobs, this powerful sprayer delivers precise, uniform application of bitumen and asphalt emulsions for superior bonding and long-lasting results. Perfect for asphalt paving, road construction, pothole repair, crack sealing, tack coat, primer application, and surface dressing across municipal roads, highways, parking areas, industrial sites, and airport runways. Key Advantages 8000 L tank for extended, uninterrupted operation High-precision spray system for consistent, even coverage Compatible with bitumen emulsion, asphalt emulsion, tack coat, primers, and bonding layers Simple, operator-friendly controls for efficient workflow Robust, mobile design for real job-site conditions Engineered for contractors, road repair crews, and paving professionals Boost productivity, reduce material waste, and achieve professional-grade results on every project. 📩 Contact us today for pricing, delivery options, and full technical specifications. Ready for immediate deployment on your next job site. Ijdpfx Abox Uxdwonsif

Condition: excellent (used), FOR SALE: Complete Automatic Production Line for Paints, Primers, Undercoats, and Acrylic Plasters - DIAMAC (Italy) For sale: a highly efficient, professional industrial line from the renowned Italian manufacturer DIAMAC. The installation is in ideal condition - it has been used only a dozen times. KEY ADVANTAGES & WORKFLOW: Continuous production cycle (zero downtime): While the operator unloads the first tank via the filling line, the next batch of finished product is being prepared in the second dissolver. Complete system: The installation comes fully equipped with all necessary pumps, transport pipelines, filters, and electrical control cabinets. Full documentation: The machines include a complete set of design drawings, electrical schematics, technical documentation, operating manuals, and CE certificates. PRODUCTION LINE COMPONENTS: Main Dissolver Unit: 2 x Stationary Dissolver 50 HP (2 x 1500 L) with Inverter: Mounted on a high steel support structure (platform + stairs) Made of stainless / acid-resistant steel (INOX) Automatic control and cycle programming Automated dosing/filling for water, 4 types of resins, and dry/powder raw materials Integrated washing system: automatic water supply for tank cleaning + discharge of wastewater to separators (allows reuse of purified water) Direct connection to the semi-automatic filling machine Iodpfx Asztwp Hobnsif Stationary Dissolver 30 HP with Inverter (2500 L) Slow-speed Stationary Mixer 10 HP (6000 L) Column Dissolver 15 HP with Inverter + dedicated tank/vessel Laboratory Dissolver 2 HP with Inverter (stepless speed adjustment for testing and formulation) Industrial Tinting System (Dosing & Coloring Unit): High steel support structure with 16 INOX stainless steel tanks and slow-speed mixers. Application: production of colored paints or multi-component specialty products (up to 16 additives). Upgrade options: Currently configured for manual operation, but fully prepared for semi-automatic production (gravimetric/volumetric dispensers) or fully automatic production (by connecting an optional PLC + dispensers/flow meters to generate color formulas via PC). Packaging & Filling Unit: DIAMAC mod. DPC30 semi-automatic liquid filling machine: Designed for packaging finished products into containers (buckets, cans, etc.) Can be permanently connected to the main 50 HP stationary dissolvers ADDITIONAL INFORMATION: Option to purchase additional auxiliary equipment. Equipment is ready for inspection and transport. Please feel free to contact me for further details, pricing, or to arrange an inspection.