Used Paint Shop for sale (9,639)

Condition: used, Höcker Polytechnik paint booth consisting of: * Spray booth approx. 3 x 2.5 m * Air supply duct * Heat exchanger * Explosion-proof lamps. Csdpfx Aoxvb Sqefnspt Technical specifications: on demand

Condition: like new (used), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 20700114-2016, year of last overhaul: 2025, Equipment: documentation/manual, Piston pump for sale due to surplus. Cedpfx Afjxyt T Usnept It was only used to spray four front doors with water-based high-build coating, so it is practically as new! Without spray gun. Service and spare parts are easily available from Hendrichs, Eupen or B&M.

Condition: good (used), Year of construction: 2005, Complete industrial paint booth, manufacturer Walther: 1 single booth + 1 double booth. Drawings with dimensions are available upon request. Cpedexvbdmopfx Afnot

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Cpedpfxjxhcx As Afnot Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Load per suspension traverse: 400 kg Corresponding technical drawing available

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - dry wall with extraction system and filters. The paint shop was used for painting window frames. Cpodpfx Aexmr Tysfnst

Condition: new, Year of construction: 2025, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Cpsdpfx Afjrvi Rienjt

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Documentation available Cpjdpfxsxtnfre Afnot

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Codpfx Asuyy A Dsfnept Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. Cpodewzl Hxspfx Afnst ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: used, functionality: fully functional, Painting line/spray hook conveyor with 19 hooks, continuous loop, consisting of 2 rails of 5000 mm each, 2 rails of 800 mm each, with 4 bends. Available at the beginning of August. Cpjdpfx Asw Eb Rhsfnjt

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Csdswn Tvuopfx Afnept Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: reconditioned (used), Year of construction: 1992, The automatic machine is after a major overhaul the whole structure was sandblasted and repainted in 2013/2014. The control system, automation, inverters have been replaced - with brand new ones, by a company specializing in automatic paint machines. The control is in Polish - touchscreen controller, very intuitive. BDB condition - everything is in working order. Cpjdpfx Aor Eratsfnot The automatic machine consists of: - integrated feeding table, - blowing section additionally equipped with deionizers before and after blowing, - scanner - transmission belt (the belt is relatively new - it worked for a few months until it was taken out of machine from use) - water-jacketed spray booth equipped with 4 Kremlin ATX guns, - integrated receiving table - belt washing unit with rollers and squeegees and a diaphragm pump for water circulation - skimmer for water purification. - paint recovery The automatic machine is sold without a pump. There is a possibility to test the automat at our plant. The machine is operational, we sell because we needed a more efficient (faster) machine. The machine is not disassembled, but it is out of service - you can come to connect the pump and run it. The machine can be converted to a "dry" version , without a water jacket.

Condition: good (used), Year of construction: 2022, operating hours: 1,620 h, functionality: fully functional, machine/vehicle number: A20221005, We are selling a complete Venjakob painting system, which we used for applying clear coat to sheet metal. The sheets had dimensions of 1,500 mm in width and 6,000 mm in length. The weight per piece was up to 300 kg. The system features six independently programmable spray guns. A drying tunnel is connected. The conveyor belt in the booth is equipped with a cleaning unit. Codpfjw E E Auex Afnopt

Condition: good (used), Year of construction: 2014, FEIGE, type FE37-E-18, year of manufacture: 2014, base dimensions 6,000 x 6,000 mm, height approx. 6,000 mm, useful volume 98 m³, heating capacity 252 kW, with paint mixing station, control and operating unit, with supply and exhaust air system. Cjdpfxewyxcde Afnjpt

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, Pony 7000 Sales Price List Paint booth 7 x 4 x 3 meters • Reinforced partial grating 5 mm • Height 3 meters (Sprinter height) • 2 x 7.5 kW motors (belt drive) • ATEX ceiling lighting • 24,000 m³/h • Incl. 2 drive-on ramps for above-floor version • Above-floor and in-ground version at same base price Base price: €28,900 Base price for 2.76 meter height version minus €1,000 (passenger car height) Base price for 3.5 meter height version plus €1,000 (motorhome height) Door-in-door system: €1,800 Double glazed doors: €1,800 11 kW motor incl. larger fans and enhanced control cabinet with direct drive: €7,770 15 kW motor incl. larger fans and enhanced control cabinet with direct drive: €8,610 Side lighting: €2,870 Ceiling lighting EX protection according to ATEX: €1,470 Full light-duty grating: €1,785 Full heavy-duty grating, reinforced 5 mm: €2,990 Direct drive with PLC control for 11 kW motors (incl. soft start): €15,120 Direct drive with PLC control for 15 kW motors (incl. soft start): €17,640 Soft start for 7.5 kW motor (belt drive only): €1,239 PLC control for 7.5 kW 24k m³/h motors with 3-stage energy saving program: €5,670 PLC control for 11 kW 30k m³/h motors with 3-stage energy saving program: €7,770 PLC control for 15 kW 30k m³/h motors with 3-stage energy saving program: €8,610 PLC control for 2 x 5.5 kW 36k m³/h (belt drive) motors with 3-stage energy saving program: €5,565 Pneumatic drive-on ramp: €4,900 Grating modification for lift: €1,785 Pass-through system with double gates (without door-in-door): €3,250 Tri Axis ramp: €7,980 Cpsdowzmcbepfx Afnet Second service door (position freely selectable): €1,150 Info: 11 kW motor set at 1,200 rpm (inverter) (1,000 rpm motor) achieves 36,000 m³/h

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 01/3072/53, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Usable space: 38 m² Total steam volume: 29 m³ Total air flow: 20,333 m³/h Booth temperature: max. 40 °C Air exchange rate - painting: 3.2 f/min Air exchange rate - drying: 20.33 m/min Cpodjwlqxnepfx Afnet Maximum permissible solvent load: 5,404 g/m³ Hazard class: A2 MACHINE DETAILS Power: 220 kW (299.12 HP) Overall length: 8,000 mm Overall width: 4,000 mm Overall height: 3,000 mm EQUIPMENT - Booth

Condition: good (used), Year of construction: 2014, FEIGE, type FE37-E-18, serial no.: 1127758, year of manufacture: 2014, base dimensions 6,000 x 6,000 mm, height approx. 6,000 mm, usable volume 98 m³, heating capacity 252 kW, with paint mixing station, control and command unit, with supply and exhaust air system. Cpjdpfjwyxb Hjx Afnjt

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Cjdpoxa H Ewofx Afnspt Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Cpodpfx Afoxa Hzxjnst Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Cjdpfx Asxa Hx Rofnspt Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation Cjdpsxa Expjfx Afnspt 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: new, AUTOMATED PAINT SHOPS These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements. Cpodpfody Ez Isx Afnet

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Cjdpob N Ahlofx Afnept Weight: 250 kg

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2026, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, nominal power: 1.6 kW (2.18 HP), input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego Herlitzius Shop Sickle Blade Slicer Mobile stainless steel design Manual operation via rotary knob Cutting width 3 - 16 mm Connection: 400V, 16A CEE plug Dimensions: 1000 x 700 x 1050 mm (W x D x H) Csdevktlvopfx Afnjpt Used machine, SAB inspected Many more bread slicers in stock!

Condition: good (used), 980 USED Bread slicer, adjustable. EXTERNAL DIMENSIONS (in cm.): - H: 115, Csdpjvpqvpefx Afnept - W: 100, - L: 75. TECHNICAL DATA: - slice thickness: 3 to 25 mm - power supply: 400 V Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. .... trays, bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices