Used Paint Mist Extraction System for sale (37,299)

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit - extraction unit dimensions: 3000 x 1000 mm Iaodpex T Amyefx Abusr Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection Iasdpfx Aeiau Tzjbujr LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Isdpfx Ajvvizkjbusar

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Iodpfx Ajwydgzjbusar

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Iaedpfsbumr Sex Abuor Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: Isdpfxsxdpl Ue Abusar - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1990, Motor power: 1 kW Iajdjwv Nbcspfx Abuor Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Iasdswv T R Uopfx Abujr Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, volume flow: 6,000 m³/h, filter area: 4 m², total length: 2,000 mm, total height: 2,000 mm, overall weight: 300 kg, power: 2 kW (2.72 HP), pipe diameter (max.): 400 mm, Paint mist extraction wall, spray wall, exhibition device, paint area approx. 2,000 x 2,000 mm, incl. side baffles, motor in ATEX version Ijdpfewrnypex Abusar - immediately available -

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box Iasdpfx Abet Rv Txeusr

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Iedpoy Dpfwsfx Abuear Condition: very good

Condition: used, Paint mist extraction system, approx. width 1200 mm, height 2200 mm, extraction motor mounted on top Isdpfx Aoyl Ippebujar

Condition: new, - Mobile design Iasdju T Hrpspfx Abuer - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, With bottom extraction attachment Ijdpfx Aeyxm Eksbusar Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Price: 3500.- Iajdpfx Abjyvkwfouor Location: 1230 VIENNA

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Edge extraction with fan Air supply unit 3102 WW, output 75 kW Ijdpfsyuf S Hjx Abuear Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Iajdpfxjyh E Hnj Abuor Length: 4000 mm 2x cardboard filters Pint Stop filters Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW CE marking

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Iodpouyh R Ajfx Abusar Height (mm): 2600 Depth (mm): 600/800

Condition: good (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 212018, NESTRO Paint Mist Extraction Unit Model NFW 2015 Used Machine Serial No.: 212018 Year of manufacture: 2001 Article number: JA_G260201 Description: Working area (L/W): 2000 x 1500 mm Airflow: 7000 m3/h Pressure: 450 Pa Power supply: 380V / 50 Hz 2.2 kW Exhaust duct diameter: 350 mm Footprint (W x D x H): 3000 x 800 x 1600 mm Weight approx.: 360 kg Condition / Performed work: - Item cleaned - Item functionally tested - Age and usage-related signs of wear Iaedpfx Absygv D Deuor - Available ex stock Note on used equipment: • Prices are ex works (unless otherwise specified!) from our location in Ottendorf-Okrilla, Germany – loaded free of charge! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice showing VAT. • All items are sold as inspected, with no warranty or guarantee claims of any kind. Prospective buyers are welcome to inspect the items at our premises. • Our general terms and conditions apply. • Special agreements are only valid in written form. • Any items shown in the background of pictures are not included in the scope of delivery. • Saw blades are for illustration purposes only and not included in the sale. Shipping options: • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is possible by arrangement and free of charge. (Assembly and operational instruction for demonstration purposes available upon request and subject to agreement!) • Delivery may be partially disassembled. • Optionally, our trained service personnel can assemble the machine at your site and provide a brief introduction. Travel, transport, and service times subject to additional charge.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 246343, volume flow: 6,500 m³/h, filter area: 3 m², type of input current: three-phase, total length: 2,080 mm, total height: 1,580 mm, total width: 900 mm, nominal power: 2.2 kW (2.99 HP), rotational speed (max.): 1,500 rpm, negative pressure: 650 Pa, control cabinet length: 3,460 mm, control cabinet height: 250 mm, intake manifold diameter: 400 mm, We are offering this new Höcker Polytechnik PaintStar MB 2015 paint mist extraction system, year of manufacture 2021. Isdpfx Ajyfv Sxjbuear Manufacturer: Höcker Polytechnik Model: PaintStar MB 2015 Year of manufacture: 2021 Condition: new Category ID: 2068 Type ID: 2305 Machine type: paint mist extraction system If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Servatechnik extraction Iaedpex Nbnnefx Abujr

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Iaodpfsxz Achex Abujr Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, bag dust filter Bag dust filter tower 4kw 9 bag extractor 3200m3/h 9 bag dust filter extractor in excellent condition for sale. Iasdpfx Abeydp Nuouer radial fan: Filli ferrari 4kw 9 pieces of EMTEX textile dust filter bags, 250mm x 1650mm/pc Outlet diameter: 600mm Inlet diameter: 260mm built-in vibratory shaker. 0.18kw. structure: galvanized steel casing, steel frame. height: 3800mm width: 1150mm

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Iodpeupv U Hofx Abujar Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 200468, overall weight: 40 kg, total length: 560 mm, total width: 480 mm, total height: 450 mm, The device is used for the isolation and purification of nucleic acid from clinical samples and not only. The system is equipped with heating and UV disinfection functions. It can simultaneously perform isolation for 24 samples. It is characterized by a short extraction time and high extraction efficiency. The extraction process is fully automated, it uses the magnetic bead method. The device consists of mechanical parts (including a vibration module, a magnetic rod module, a magnetic sleeve module and an entrance and exit door module) and electrical parts (including a control module and a heating module). Iaodpfx Aswnny Ijbuor