Used Other metal presses for sale (189)

Year of construction: 1992, Condition: ready for operation (used), Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once. Crobvi U Hetk Nx Eswob

Year of construction: 1992, Condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Csbevdu Nvevi U Hwjrb

Year of construction: 1992, Condition: ready for operation (used), Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible. Crsbvi U Hsvriqdowsb

Year of construction: 1986, Condition: ready for operation (used), Press force: 315t, stroke: 600mm, table dimensions X/Y: 2000mm/1200mm, ram area X/Y: 2000mm/1200mm, rapid stroke: 450mm/s, working speed range: 14mm-40mm/s, retraction speed: 300mm/s, table height: 900mm, oil volume: 2000l. Dimensions X/Y/Z: approx. 5000mm/3200mm/5000mm, weight: approx. 45000kg. A retrofit was carried out in 2016. Documentation available. On-site inspection is possible. Available from October 2024. Csbviet Hkiae U Hworb

Year of construction: 1971, Condition: ready for operation (used), Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg. Csbvi Ustz Dldj Hwerb

Condition: ready for operation (used), Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible. Crebvot Uhz Nei U Hwob

Year of construction: 1988, Condition: ready for operation (used), Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible. Cebvi Ueu Nlk Ej Hwerb

Condition: ready for operation (used), Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible. Csbvju N Hdtoi U Hwjrb

Year of construction: 1998, Condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Cobvsttbd Tsi U Hwjrb

Year of construction: 1998, Condition: ready for operation (used), Number of levels: 4, pressure beam: 4/level, hold-down device: 4/level, pressing length: 2000mm, pressing width: 1040mm, max. workpiece thickness: 80mm, total pressing pressure: 12t, effective depth: approx. 980mm, distance between outer edge uprights and outer edge uprights: 1940mm, machine dimensions X/Y/Z: approx. 2400mm/1700mm/2100mm. On-site inspection is possible. Cobviovtqr Ss U Hwerb

Condition: ready for operation (used), Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible. Cebvi Usu Av D Ns Hwsrb

Year of construction: 2018, Condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Crebvisu Dal Hs U Hweb

Year of construction: 1995, Condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Crebvetva Dnji U Hwsb

Condition: ready for operation (used), Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg. Crebvijtxbz Ee U Hweb

Condition: ready for operation (used), Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible. Crjbvisukh Alo U Hwob

Year of construction: 1993, Condition: ready for operation (used), Pressing force: 1500kN, max. stroke: 160mm, stopping time: 80ms, motor power: 7.2kW. Documentation available. On-site inspection is possible. Cjbovur Haovi U Hworb

Year of construction: 2011, Condition: ready for operation (used), Two heated hydraulic presses are available. 1) Italpresse GL9-6/188, year of manufacture: 2011, press force: 300t, spec. press force: 43kg/cm², cylinder: 6, cylinder diameter: 140mm, table dimensions X/Y: 1400mm/600mm, opening height: 400mm, heating plates: electric, drive power: 5.5kW. 2) Joos HP S80, year of manufacture: 2011, pressing force: 80t, plate dimensions X/Y: 2500mm/1250mm, piston diameter: 80mm, operating pressure: approx. 385bar, spec. pressing force: 2.5daN/cm², cylinders: 4, heating: electric, machine dimensions X/Y/Z: approx. 2900mm/1500mm/2100mm, weight: approx. 3300kg. On-site inspection is possible. Cobvisugmxps U Hwjrb

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Cebsum U Sxsvi U Hwerb

Year of construction: 1977, Condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Crobvi U Hjt Nhmhewob

Year of construction: 1971, Condition: ready for operation (used), Working width: 3500mm, max. sheet thickness: 4mm, machine dimensions X/Y/Z: approx. 3800mm/1500mm/1900mm, weight: approx. 9000kg. The machine has a leak on the right cylinder. Documentation available. On-site inspection is possible. Csbvi Usuh Az No Hwsrb

Year of construction: 2003, Condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Crobviju Dalys U Hwsb

Year of construction: 1982, Condition: ready for operation (used), Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible. Cobveuy T H Asi U Hwjrb

Year of construction: 1995, Condition: ready for operation (used), A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible. Cebvijuhqcbj U Hworb

Year of construction: 2000, Condition: ready for operation (used), A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Cebvi U Houii Swowerb

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Csbeu N Hc Njvi U Hwerb