Used multi- spindle drilling machines for sale (85)

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam Bsdpfx Akoz Df Txsnolp with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), functionality: fully functional, 21 spindles spindles right/left table dimensions 840x440mm 2 pneumatic clamps spindles span 32mm pedal control Blodpfx Akjzz N Tmsnep pneumatic setting vertical/horizontal

Condition: used, Vitap Classic Multi-Spindle Drilling Machine, 21 spindles, Bsdpfxsz Hxi Ej Aknslp left/right-hand spindles, quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, 2 pneumatic clamps, power supply 380V, 1.8 kW motor, Machine ready for operation.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Bjdszyr Epopfx Aknolp

Condition: used, Used, 3-spindle vertical multiple drilling machine with Morelli motor, with certificate of conformity. Blsdpfxs Ahgqve Aknsp

Condition: excellent (used), functionality: fully functional, 23 spindles left/right spindles 3 pneumatic clamps spindles span 32mm pedal control Bledszz N S Nepfx Aknjp CE

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Point to point Through-feed CNC boring machine HIRZT MERIS K2, Year 2010 - Working width up to 870mm - Working length, no limit - Working thickness up to 40mm Bledpfxjz Ag E Nj Aknjp - Configuration: 14 + 4 + 2 pcs. drilling units + routing unit 5 sides drilling - Automatic panel positioning - Automatic unloading system to return the panel to the operator or move forwards as a through-feed machine. Machine ready for loading M: 0030 6934 522 577 Sotiropoulos Nick

Condition: used, Technical specifications: Bjdpfx Aozvmvhjknolp Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. Bjdezuhb Aspfx Aknelp • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Bledpfxetmwnis Aknep Available immediately.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,600 kg, pressure: 7 bar, Masterwood Speedy TF 2.0 Machine in very good condition Maximum working width: 1000 mm Blodez A Traspfx Aknop Maximum working length: unlimited Fully equipped Drilling head Saw blade Tool changer Router ISO30 Masterwork CAD-CAM system Tables with adjustable inclination, front and rear Available from the end of November 2026 Price upon request

Condition: new, Year of construction: 2026, functionality: fully functional, /// DESCRIPTION Multi-functional CNC drilling machine is able to drill from 6 sides. Independent top grooving, 5.5kw main spindle of 4-slot tool changing magzine, and 1 drilling block on top, one drilling block and one main spindle on bottom meet different process requests and gives batch-size-one production max flexibility; Software is open port, support most formats in market. Compact design, save space /// TECHINICAL SPECS Total power - 21.07 KW Machine dimensions - 3962× 3010× 2320mm Power supply - 380 V/50 Hz Air supply 0.6-0.7 MPa SYNTEC control system Panel size Length 200-2,800 mm Width 30-1,220 mm Thickness 10-60 mm Maximum travel speed X-axis/U-axis - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Bledpjyi Avfjfx Aknjp V axis (push) - 30 m/min Drilling blocks Top 1; Bottom 1 Number of vertical drills (top) 1 Number of horizontal holes (top) X: 2*2+ Y: 2*2 Number of vertical drills (lower) 9 Maximum drill diameter Φ35 mm Distance between holes 3 Rotation speed 5000 rpm Shaft diameter Φ10 mm Drill length 7 Main shaft Upper - 1*5.5 kW ER32 ATC4 18000 rpm Lower - 1*3.5 kW er25 18000 rpm Saw blade Power 1.7 kW Dimensions Ф 100* Ф 22* δ 4Center distance 6500 mm Conveying capacity approx. 0.2 t/hour Conveying speed approx. 0.5 m/sec Width of belt 500 mm Motor power 1.5 kW Operation voltage 400 V Frequency 50 Hz

Condition: excellent (used), CATALOGUE NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2 x 20 pcs - Number of vertical spindles: 1 x 20 pcs Bedpszr U Dlefx Aknjlp - Distance between extreme spindles: 610 mm - Distance between spindles: 32 mm - Stroke of the feed cylinder: 60 mm - Max. length of the workpiece: 3400 mm - Adjustment of horizontal spindles: up/down, front/back - Adjustment of vertical spindles: left/right - Ability to operate on each drilling machine separately - Right-hand/left-hand drills, mounted with threads (screwed in) - 3 pneumatic clamps - Motor power: 4 x 1.85 kW - Air consumption: 6-8 bar - Dimensions (L/W/H): 4600 x 1180 x 2200 mm - Weight: approximately 1500 kg Net price: 12,900 PLN Net price: 3,000 EUR, depending on the exchange rate (4.3 EUR) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, 29 spindles Bsdszz N S Ajpfx Aknjlp left/right spindles spindles span 32mm horizontal or vertical drilling setting of depth of drilling pneumtatic movement of drilling head

Condition: used, Multi-spindle drilling machine Maggi BS 35 2/26. Blodpfxjzkh Rco Aknep

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 610203Z, overall weight: 295 kg, Vitap ALFA 21 Classic Multi-Spindle Boring Machine – 2016 Vitap ALFA 21 Classic semi-automatic multi-spindle boring machine manufactured in Italy. The machine is designed for precision line boring operations in furniture and cabinet production according to the 32 mm system. Suitable for vertical, horizontal, and angled drilling in chipboard, MDF, and solid wood components. The machine is in very good condition, fully functional, and ready for immediate operation. Features: Manufacturer: Vitap Model: ALFA 21 Classic Year: 2016 21 spindles 32 mm spindle spacing Pneumatic tilting boring head (0°–90°) Vertical and horizontal boring Foot pedal control Pneumatic material clamps Quick-change drill chucks Precision fences and stops Heavy-duty industrial construction Technical data: Number of spindles: 21 Distance between first and last spindle: 640 mm Spindle speed: 2800 rpm Max. drilling depth: 70–80 mm Max. tool diameter: Ø35 mm Table size: approx. 864 × 500 mm Motor power: 1.5 kW Power supply: 400V / 3 phase / 50 Hz Required air pressure: 6–8 bar Machine weight: approx. 295 kg Bedpfx Aksy Uwryenslp The machine can be inspected and tested while powered on.

Condition: good (used), Code: 0502 Brand: ZANGHERI E BOSCHETTI MASTERWOOD Model: FM 39S Multiple boring machine for furniture, carpentry kitchens, custom-made furniture, bathroom furniture, panels and various items Blsdpfxo Aaykwe Aknep Technical data: N° 39 spindles Max drilling centre distance mm 1216 Centre distance between the two spindles mm 32 Table dimensions mm 1425 x 780 Max vertical drilling depth mm 120 Threaded drill bit shank Motor power 4 Hp Quick adjustment of the heads for drilling at 0°-45°-90°, with the option to operate in all intermediate positions Millimetre-marked square guides N° 4 pneumatic clamps for securing workpieces Operating pressure 6-8 atm Overall dimensions mm 1590 x 1000 x 1200 h Weight kg 770

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW Bodexcwmqopfx Aknelp - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Application Areas - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths 2 Aluminium fences 2 x 1500mm Bljdpfx Aksiu Urponop 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: used, MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, quick-change clamping system, spindle pitch 32mm, vertical or horizontal drilling, 3 pneumatic clamps, Bjdpfeywwwhox Aknslp power supply 380V, The machine is fully functional and ready for work.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 891149, 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Bedpfx Aszcg Ifsknolp

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand Blodpfszz Rpvex Aknop + 3 spindles to be revised

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 Bsdpfx Aksx Rcqgjnelp - Center distance 32 mm.

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Bodjfriztspfx Aknslp Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Bjdpey Tt Rpefx Aknolp Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED