Condition: like new (used), Year of construction: 2021, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 1184972, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The milling machine was purchased new in 2023. Hedpfx Aaezud D Tjtjnr It is being sold with 15 tool holders,an Allmatic 5axis hidraulic vise, working table and Renishaw measuring sistem. The machine is in impeccable condition.

Condition: like new (used), Year of construction: 2021, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 1184972, table width: 500 mm, table height: 500 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,500 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The milling machine was purchased new in 2023. Hjdjzud Acepfx Aatenr It is being sold with 15 tool holders,an Allmatic 5axis hidraulic vise,and Renishaw measuring sistem. The machine is in impeccable condition.

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Hnsdpfxozudd Te Aater

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating hours: 1,300 h, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 80, controller manufacturer: Heidenhain, total height: 3,230 mm, total length: 3,840 mm, total width: 3,800 mm, overall weight: 12,000 kg, controller model: TNC 640, torque: 112 Nm, spindle motor power: 40,000 W, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rotary table diameter: 600 mm, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, table load: 600 kg, tool diameter: 125 mm, tool length: 300 mm, tool weight: 8,000 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The G6 model is a compact, vertical machining center designed for the intelligent machining of small to medium-sized workpieces with high demands on geometry and accuracy. Hsdpfxjrmm Hae Aatjnr The basic structure (U-shaped gantry design) made of Meehanite casting enables an even distribution of forces during machining and excellent accessibility to the work area. The two symmetrically arranged and synchronously running ball screws in the Y-axis ensure a smooth and jerk-free feed movement under load. These two features are unique for this machine size and therefore offer decisive competitive advantages. All AXILE models include their patented SMT™ (Smart Machine Technology) system as standard, with features such as spindle vibration monitoring, thermal compensation and adaptive feed control. This demonstration machine is already equipped with the ART™ monitoring system (recognizable by the "i" after the model name). Special equipment: Automatic kinematics control, BLUM measuring probe (integrated in the table), Heidenhain TS-740 workpiece measurement, chip flushing in the work area, coolant supply through the spindle (40 bar), oil skimmer. Available at short notice. Only while stocks last.

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Hnodpfx Aasyx U Nwjtjr

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is a used SIGMA Zenit 5 vertical CNC machining center with a GE Fanuc Series 18-M CNC control. The machine features a large work area, an automatic tool changer, and an NC rotary table with a chuck mounted on the machine table. This makes it suitable for general milling, drilling, and machining tasks, as well as – if the rotary table is functional – for machining with an additional rotary axis. The machine is currently located at the operating site. An inspection and functional test can be arranged after prior agreement. TECHNICAL DATA Hsdpfx Aezucrcoatenr Control: GE Fanuc Series 18-M Travel in X-axis: approx. 1,250 mm Travel in Y-axis: approx. 600 mm Travel in Z-axis: approx. 685 mm Table size: approx. 1,400 × 650 mm Maximum table load: approx. 1,400 kg Spindle speed: presumably up to 12,000 rpm Spindle power: presumably up to 25 kW Tool holder: presumably ISO 40 / SK 40 Tool changer: automatic Tool positions: number to be checked Connection: 400 V / 50 Hz / 3-phase Rated current: 55 A Machine weight: approx. 8,000–8,500 kg Dimensions: approx. 4,120 × 3,270 × 3,050 mm EQUIPMENT – GE Fanuc Series 18-M CNC control – Automatic tool changer – NC rotary table with chuck – Spindle cooling unit – Coolant system – Hydraulic unit – Fully enclosed work area – Machine lighting – Control panel with screen and keyboard – Existing documentation and tool holders: scope on request or to be checked CONDITION Used machine with signs of wear and tear consistent with age and use. The work area contains typical soiling from chips and coolant. TERMS OF SALE Sale from the current location. Disassembly, loading, and transport will be carried out by agreement and will generally be at the buyer's expense.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 3094252, SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 |Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg Hjdpfx Aajzubxnotonr MACHINE EQUIPPED WITH: - Haas CNC Control system 3 jaw chuck 165mm diameter Parts catcher Hydraulic tailstock Tool presetter Interlocked guarding Automatic lubrication system Coolant system

Condition: excellent (used), Year of construction: 2014, Spinner VC 750 CNC machining center Year of manufacture: 2014 X-axis travel: 760 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Control system: Sinumerik 840D SolutionLine Spindle speed range - main spindle max. 12,000 rpm Hnodpfx Aozuba Soatjr Drive power - main spindle 14 / 10 kW Torque 89 / 63.7 Nm Tool holder: SK 40 Table surface area: 900 x 410 mm Max. table load: 350 kg Number of tool positions: 32 Max. tool diameter: 130 mm Max. tool length: 200 mm Max. tool weight: 8.0 kg Rapid traverse rate (X / Y / Z): 36 m/min Total power consumption: 20 kVA Machine weight: approx. 3.3 t Space requirement: approx. 3.0 x 2.5 x 2.9 m Linear measuring systems Chip conveyor

Condition: like new (used), Year of construction: 2023, Haas TM2-P Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 WIPS HSM 4th axis connection Very few operating hours Like new! Hedpfszua Hwox Aatonr

Condition: good (used), Year of construction: 2013, Haas VF4SS Hnsdpfszuazhjx Aater Year of manufacture: 2013 BT 40 spindle RPM: 12,000 TSC (Tool Side Center) WIPS (Wireless Intuitive Probe System) 4th axis: HRT 210

Condition: good (used), Year of construction: 1998, Victor VT26 Year of manufacture 1998 Fanuc OT control Hnsdpszuaydofx Aatjr C-axis Z-axis travel: 1100 mm Chuck diameter: 250 mm Equipped with chip conveyor and tooling Video available

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable Hnjdpfx Aeviq U Ejatjr With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: ready for operation (used), Type: FEELER QM-40S Fanuc 18i-MB control Renishaw tool setter X-axis travel: 1000 mm Y-axis travel: 520 mm Z-axis travel: 505 mm Table size: 520 × 1150 mm Max. table load: 500 kg Spindle taper: ISO 40 (7/24 taper No.40) Spindle speed: up to 10,000 rpm Main power: 15 / 18.5 kW Hsdpfx Aaoyi H R Totjnr Tool changer: 24 positions (random ATC) Max. tool weight: 8 kg Max. tool length: 300 mm Max. tool diameter: Ø80 mm (Ø150 mm without adjacent tools) Rapid traverse: X: 48 m/min Y: 48 m/min Z: 30 m/min Cooling: internal cooling (high-pressure spindle cooling) external cooling chip flushing Required air pressure: 6–8 bar Power supply: 20 kVA Spindle oil cooled Machine weight: approx. 6,300 kg Machine dimensions: 2,800 × 2,185 mm Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,652 kg, overall weight: 4,990 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 16,000 W, tool weight: 6,800 g, number of axes: 3, This 3-axis FADAL 4020 FX vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 1,219 x 508 mm and a maximum table load of 1,652 kg. If you are looking to get high-quality machining capabilities, consider the FADAL 4020 FX machine we have for sale. Contact us for further details. • Table • Size: 48" x 20" (1,219 x 508 mm) • T-slots: 5 x 18 mm x 95 mm • Feed rates • Cutting feed (X/Y/Z): 800 ipm (20.32 m/min) Hedpjyn Eh Iefx Aatsnr • Rapid traverse: 1,000 ipm (25.4 m/min) • Accuracy • Positioning accuracy: ±0.0002" (±0.0050 mm) • Repeatability: ±0.0001" (±0.0025 mm) • Spindle • Orientation: Electromechanical • Drive: AC vector drive • Power • Spindle motor: 17.75 HP (22.1 HP peak) • Torque: 39 ft-lbs (78 ft-lbs peak) • Optional high torque: 15 HP / 227 ft-lbs • Tool changer (ATC) • Capacity: 21 tools (30 optional) • Selection: Random, bi-directional • Max tool diameter: 76 mm (114 mm without adjacent tools) • Max tool length: 381 mm • Machine data • Power requirement: 76 A, 230 V, 3-phase • Air requirement: 120 psi, 15 scfm Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2011, AGIE MIKRON HPM 600 HD – Vertical CNC machining center, 3 axes For sale is a used AGIE MIKRON HPM 600 HD vertical CNC machining center, manufactured in 2011. The machine is equipped with a HEIDENHAIN iTNC 530 CNC control system and has three controlled axes. According to the available documentation, it is equipped with a swiveling and rotating rotary table. Technical data: Manufacturer: AGIE MIKRON Type: HPM 600 HD Year of manufacture: 2011 CNC control: HEIDENHAIN iTNC 530 Travel distances X/Y/Z: 600 / 600 / 500 mm Maximum workpiece weight: 500 kg Spindle speed: 20–20,000 rpm Tool magazine: 60 positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool length: 300 mm Maximum tool weight: 6.5 kg Chip conveyor Coolant system Machine weight: approx. 9,500 kg Dimensions (L × W × H): approx. 3,500 × 2,350 × 3,050 mm Hnjdpfx Ajzk Erkeater According to the owner, the machine is in good condition and can be inspected by appointment. We will gladly provide further technical documentation, images, and information upon request. ____ Our general terms and conditions apply. In addition, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and approved for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial businesses and without warranty. Subject to prior sale.

Condition: good (used), Year of construction: 2005, HURCO vertical machining center with 4th axis, including: 16.000 RPM SK40 (BIG-PLUS) spindle HYDAC cooling unit High-Pressure Through-Spindle Coolant System Tool Length Measurement and Workpiece Position Detection with two Renishaw probing systems CNC-Controlled Rotary Table MR320 X-axis Travel 1270 mm Hnsdpfszt R Ivox Aatjr Y-axis Travel 650 mm Z-axis Travel 610 mm Max spindle speed 16000 rpm Full technical specifications in the attached document. Viewing of the machine in operation is possible upon appointment. Availability: 12/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details. • Tool magazine capacity: 24 positions Hjdpfszrw Nksx Aatonr

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Hnsdpfx Ajzrv Dgsatsr Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: like new (used), Year of construction: 2022, operating hours: 2 h, functionality: fully functional, feed length X-axis: 762 mm, feed length Y-axis: 508 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The machine is literally like new, with only a few operating hours!! Hnodpfx Aaszt Rdqetor 12K-40T-IN - InLine SMTC40-30 - Side Mount Tool Changer WIPS-R - Wireless Intuitive Probing System AUGER - Chip Removal System P-COOL - Programmable Coolant Nozzle TSC - Through Spindle Coolant 21 bar EPFDM - Early Power Failure Detection Module ETHERNET/WIFI EXPANDED-MEMORY - 1Gb HSM - High Speed Machining MACRO - User Definable Macros ROT&SC - Coordinate Rotation and Scaling SO - Spindle Orientation RTAP - Rigid tapping Optional: 4AXD - 4th-Axis Drive and Wiring ENCL EXHAUST - Enclosure Exhaust System OIL-SKIMMER COOLANT REFILL

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 635 mm, controller model: Haas M15.x | 15" LCD, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 10K-50T-GBX – Automatic Gearbox, 2 gears / 610 Nm WIPS-R – Wireless Intuitive Probing System AUGER – Chip Removal System P-COOL – Programmable Coolant Nozzle Hodpfx Aaszt Rctetenr TSC – Through Spindle Coolant RHJ-E – Remote Hand Jog 16 Mb – Extended Memory HSM – High-Speed Machining SO – Spindle Orientation ROT&SC – Coordinate Rotation and Scaling MACRO – User-Definable Macro RTAP – Rigid Tapping

Condition: used, Year of construction: 1997, Bridgeport VMC 800/22 CNC Vertical Machining Centre With Heidenhein TNC 426 Control Table Dimension 1,000 x 490mm (5 'T' Slots). Maximum Table Load 750kg. Axis Travel 'X'=800mm, 'Y'=510mm, 'Z'=500mm. Maximum Spindle Speed 6,000rpm (11kW Motor). Spindle Taper BT40. 22 Position ATC. S/No. 720971 (1997). Hodpfx Aaozt N Rpetsnr With Coolant System, Spindle Probe Interface, 2 Heavy Duty Machine Vices (Jaw Width 200mm) & Quantity Of Toolholders. Weight 3,600kg.

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Hnedpfxozt Nywe Aator Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1124343, travel distance X-axis: 1,060 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,800 kg, total height: 2,570 mm, total length: 4,000 mm, total width: 2,600 mm, table width: 630 mm, table length: 1,372 mm, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HAAS VM-3 CNC Vertical Machining Center – 2015 Price: €36,900 + VAT For sale is a HAAS VM-3 CNC Vertical Machining Center, manufactured in 06/2015. The machine is currently connected and operational and can be inspected and demonstrated under power by prior appointment. Technical specifications Manufacturer: HAAS Automation Model: VM-3 Year of manufacture: 06/2015 Serial number: 1124343 CNC control: HAAS Classic Control Software: M18.24B X-axis travel: 1,016 mm Y-axis travel: 660 mm Z-axis travel: 635 mm Maximum spindle speed: 12,000 rpm Spindle taper: 40 taper Automatic tool changer: 24 positions Power supply: 354–488 V / 3-phase / 50–60 Hz Equipment / Options TSC – Through-Spindle Coolant HSM – High Speed Machining Renishaw workpiece probing system Tool measurement / tool setting system Automatic tool changer Chip removal system Programmable coolant Coolant system with filtration Machine data from CNC control Hnjdszt Nu Ujpfx Aatsr Run Time: 14,870 hours Tool Changes: 117,359 Power Ons: 2,608 The machine is well suited for precision CNC milling, tool and mould making and demanding 3-axis machining applications. The machine is offered for sale as a used machine. Inspection, functional testing and demonstration under power are available by prior arrangement. Location: Slovenia, EU Additional information, photos and a video of the machine in operation are available upon request. On-site inspection can be arranged by appointment.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity Hodpfx Aaszt Nlmstenr 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details x-travel 1050 mm y-travel 530 mm z-travel 630 mm Control Heidenhain TNC 620 table surface area 1150 x 560 mm tool taper SK 40 spindle turning speed range 10000 U/min rapid traverse 24 m/min total power requirement 25 kVA Hedpfx Aezrukfoatenr weight of the machine ca. 7,8 t dimensions of the machine ca. 4,3 x 2,4 x 2,9 m Additional information Working hours (date 10. July 2026): - Control on: 20811 h - Machine on: 13353 h - Programm cycle: 7412 h - Spindle hours : 5184 h Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe 30-station tool changer Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine documentation