Key-way milling machine

Busch

Condition: good (used), Alignment tester, inclinometer, clinometer, shaft/spindle angle clinometer gauge -Manufacturer: A. u. W. Busch, alignment tester inclinometer Bodjzh Eutopfx Adrsdd -Type: V 35 -Dimensions of transport case: 400/265/H205 mm -Weight: 9.3 kg

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Bdsdpoh Hvk Asfx Adrsd Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: excellent (used), Year of construction: 2008, We have 3 pieces in stock Year of production: 2008 Ultimate vacuum (P_abs): 100 hPa (mbar) Nominal capacity: 250 m³/h Bdodezhv Azepfx Adrsd

Condition: new, Side Channel Vacuum Pump, Side Channel Blower, Vacuum Pump, Busch Samos Si 1150 E1 Manufacturer: Busch Type: Samos SI 1150 E1 Condition: New, Tested Bdedpfov Tppiox Adrod Weight: 360 kg Year: 2020 Overall dimension : 2100 x 1360 x 1000 mm Housed in a soundproof enclosure, made of stainless steel. Pump Performance: Max. differential vacuum: -185 mbar, 828 mbar Max. differential pressure: +155 mbar, 1168 mbar Airflow rate: 1200 m³/h Electrical Data: 11/12.6 kW, 400 V, 50/60 Hz, 26-46 A

Year of construction: 1984, condition: good (used), Part on table ,marked with red ,not come. Bjdpfxelz Izle Adrodd

Condition: ready for operation (used), Busch RA 0202 D Rotary Vane Vacuum Pump Vacuum: 0.5 mbar No: C0236000063 Weight: approx. 150 kg Nominal suction capacity: 200 m³/h at 50 Hz 240 m³/h at 60 Hz Rated motor power: 4.0 kW at 50 Hz Bsdpfx Aewm Durjdrsdd 6.6 kW at 60 Hz Rated motor speed: 1500 rpm at 50 Hz 1800 rpm at 60 Hz The description has been accepted. You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. A net invoice can also be issued for foreign customers. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: excellent (used), Here we offer a Busch dry scroll vacuum pump. Busch dry scroll vacuum pump Type: FO 0030 B 0110..ZZ Condition: used Scope of delivery: (See image) Bodpezgbvdjfx Adrjdd (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bodpfx Asy H Dahodredd

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump Bodey Tkivopfx Adrjdd -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/440/H340 mm -Weight: 37.5 kg

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Bdodpfxeptbi Dj Adrjd

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Bdodpfsyxnyisx Adrsd

Condition: excellent (used), Year of construction: 2004, Lovely Busch RA 0630 vacuum pump which has just come out of a closed factory. Mounted on its own stainless platform and has a control panel fitted. Looks much newer than 2004. Bdedei Exf Aspfx Adrod

Condition: good (used), Busch SE 125 Pile Turner Bdedpfezfww Isx Adrsd This machine is like new, fully functional, and ready to use. This turner is from the German manufacturer Busch. This is the current model in production. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Device weight: 850 kg Power supply: 380 V Controlled from a control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Includes documentation.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis YCM NXV560A was manufactured in 2014. It features a direct-drive spindle with a speed of 12,000 rpm, a 28-station arm-type tool changer, and a belt-type chip conveyor. The CNC control is iTNC530 HSCI, and it has XYZ travels of 560, 410, and 450 mm respectively. Consider the opportunity to buy this YCM NXV560A vertical machining center. Contact us for more information. Bdsdpox D Dttsfx Adrsd • Tool magazine: 28 stations, arm-type random changer • Coolant through spindle: 20 bar Additional equipment • Chip conveyor: Belt-type

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Bjdpfx Adozg Thxsrsdd Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive: 5.5 kW Accessories: support tables Tool holders, cutters Coolant system Digital display Weight: 4 t Price: EUR 3,000 – plus VAT ex location