Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, Functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. Debvbeickd Hscr Hokl The price is loaded on truck.

Condition: used, Year of construction: 2010, We will sell a STORK 900 injection molding machine, injection molding machine parameters below: Year of production: 2010 Installed power: 132KW Maximum injection speed: 400mm/s Maximum injection pressure: 1650bar Screw diameter: 98mm Maximum injection weight for PP: 3180g Closing force: 9000KN Clearance between columns: 1010x1010mm Minimum form height: 300mm Maximum table opening: 1190mm Maximum height of ejector pin: 700mm Diameter of centering pins: 250mm Maximum ejector stroke: 300mm Dimensions of mold mounting plates: 1570x1560mm Dksbvjpmr H Ijbcr Hol Unit volume: 5857g Mouthpiece opening diameter: 8mm The machine is equipped with a Sytrama robot. The injection molding machine in good condition is still used in current production, it is possible to see it on site or send a video with an example of operation.

Condition: excellent (used), Year of construction: 2003, operating hours: 27,900 h, Functionality: fully functional, clamping force: 1 kN, screw diameter: 32 mm, Type: HL120 RS35/32 Year : 2003 Dkebsu E Unfovbcr Hsl Auger ø 32 mm Hours: 27.900 h

Condition: used, Year of construction: 2020, EASYMASTER EM560-SVP-2 Clamping force 560 T Dkebveubu A Sobcr Hel Spray volume 2544 cm3

Year of construction: 2010, Condition: excellent (used), Krauss Maffei KM 180 - 750 AX injection molding machine Fully electric machine Year of manufacture -2010 Replaced new plastification system motor MC5 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Closing force of the mold: kN 1760 - Clamping plate dimensions (h x v): mm 790 x 740 Dobjn Atndevbcr Hokl - Clearance between columns (h x v): mm 560 x 510 - Mold opening path max: mm 450 - Mold installation height min/max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: kN 49 Injection unit - Auger diameter: mm 50 - Ls/D ratio: 20,2 - Injection pressure: bar 1892 - Injection volume: cm3 393 - Injection weight for PS: g 357 - Injection capacity: cm3/s 314 - Screw speed, max: rpm 320 - Nozzle clamping force: kN 29,4 Electrical parameters - Connection value: kW 38 - Heater power: kW 15,6 - Number of cylinder heating zones: - 5 - Dry cycle time according to Euromap 6: 1/h 2000 - Dry cycle time according to Euromap 6: s 1.8 Weight and dimensions - Net weight with control cabinet: t 6.5 - Machine dimensions (L x W x H): m 6.07 x 1.92 x 2.01

Condition: excellent (used), Year of construction: 2006, operating hours: 56,700 h, Functionality: fully functional, screw diameter: 85 mm, injection pressure: 2,110 bar, injection weight: 2,195 g, Machine type: Battenfeld injection molding machine HM 500/5100 Year of manufacture: 2006 Working hours: 56.700 Control system: Unilog B6 Injection system Screw diameter: 85 mm Specific injection pressure: 2,110 bar Injection volume: 2,412 cm³ Injection weight: 2,195 g Clamping system Clamping force: 500 t Mold platen dimensions: 1,470 mm x 1,260 mm Free space between the columns: 900 mm x 720 mm Height of the molds: 450 mm Opening stroke: 1,150 mm Max. Distance between the plates: 1,600 mm Stroke of the ejector: 250 mm Electrical power Power of the pump motor: 75 kW Output of the cylinder heating band: 37.3 kW Dkjbvbeu Dawvjcr Hol Instrumentation EUROMAP 67 Robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving platen 8 x hot runner control Bimetallic injection system Ejector plate General data Dimensions: 6.9 x 2.4 x 3 m Weight: 26,000 kg

Condition: like new (used), Year of construction: 2010, operating hours: 8,300 h, Functionality: fully functional, screw diameter: 14 mm, Autonomous injection unit Make: Ferromatik Milacron Type: SE -55 Screw: 14 mm Operating hours: 8 300h Year: 2010 Separate control cabinet with control and servo amplifier and a control terminal with 10.4 inch touch screen. The self-contained injection unit gives you an easy introduction to multi-component technology. It is fully electric and energy efficient. + Quick retrofit for almost any machine Dobvbjt Dzz Uecr Hekl + Increased machine flexibility depending on production requirements

Condition: good (used), Year of construction: 2019, EASYMASTER EM480-SVP-2 injection molding machines Dsbvbcsubuznor Hekl Injection volume 2164 cm3 Clamping force 480 T

Condition: good (used), Year of construction: 2003, Engel ES 1350/250 HL injection molding machine Year of manufacture - 2003 Control - EC 100 Clamping force: 250 tons Injection weight (max): 662 g Plate size (H): 1050 mm Plate size (V): 650 mm Auger diameter : 60 mm Injection volume : 753 ccm Mold height (min): 350 mm Daylight between plates (max) : 1200 mm Opening stroke (max) : 850 mm Dkebvbcrjvfuade Hel Ejector stroke: 200 mm Number of cores: 2 Injection pressure: 1480 bar Heating zones: 8 Oil tank capacity: 790 l

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Dobvbcrot Dx Hbo Hokl Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: excellent (used), Year of construction: 2005, Injection molding machine Arburg 570C 2200-1300 Year of manufacture : 2005 Control : Selogica Dkebvbcsvft D Uer Hol Injection system : Screw diameter : 60 mm Injection weight: 558 g Injection pressure: 2000 bar Injection volume : 664 ccm Closing system : Closing force : 220 tons Distance between columns: 570x570 mm Size of clamping plates: 795x795 mm Ejector : hydraulic Clamping unit: hydraulic Additional equipment: Hybrid machine: fast, energy efficient Euromap 67 Hydraulic core pulling x 2 Injection system - bimetal Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, Functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Production in clean room. Dkjbvbcet Dxqtsr Hol

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 800 - 12000 MX injection molding machine Year of manufacture - 2007 Closing system : - Mould closing force: kN 8000 - Opening force of the mold: kN 560 - Clamping plate dimensions (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system : - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Screw speed, standard/optional: rpm 121/153 - Injection capacity (standard) Electric-hydraulic equipment - Pump motor power rating: kW 110 - Installed heater power: kW 57 Dkobvbcjvcpdror Hol - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (L x W x H): m 10.81 x 2.92 x 2.51

Condition: used, Year of construction: 1996, operating hours: 54,800 h, Functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, overall weight: 2,900 kg, Engel 25 tons incl. Engel picking robot Max opening distance: 248mm Max ejection distance: 100mm Distance between tie bars: Tie bar free Mold table size: W 550mm H 430 mm Mold ring size: 100mm Water battery: 4 channels, Also sits cooling block with 4 channels. Core features: Program available. No sockets Dksbvbcrot Dw Iko Hel Socket for color doser: Yes Interface: Only for Engel's own picking robot. Hot runner control: No Electrical outlets on machine: 3 single phase. 4 x 3-phase.

Condition: excellent (used), Year of construction: 2007, TOSHIBA IS650GTW injection molding machine Year : 2007 Screw diameter : 95mm Injection weight : 2900 g Injection volume : 3150 ccm Short circuit force : 650ton Column spacing : 1080 x 1080mm Plate size : 1530 x 1530mm Opening path (Max. Distance): 1800mm Debji Dbtrovbcr Hekl Opening path (Min. Distance): 450 / 900mm Machine Weight: 30ton Machine size: 7.9 x 2.5 x 2.2m Core function : 5 Core Function Pneumatic drive : yes Hydraulic clamping function : yes Machine Dimensions (LxWxH): 7.9m x 2.5m x 2.2m Machine weight : 30 tons

Year of construction: 2002, Condition: excellent (used), Model: ES 750H330W/250 HL-2F Year : -99 Debvbcoiv Swxer Hskl

Year of construction: 2023, Condition: as good as new (ex-display), Krauss Maffei KM 50 - 100 PX injection moulding machine Year of manufacture - 2023 Dkobvjpy Drhobcr Hjl Closing unit 5-point clamping unit with double switch (3 plates), with electric servo drive. Injection unit with electric servo drive and plasticising axes, as well as servo-hydraulic movement of the injection unit. MC6 control based on an industrial PC with real-time Ethernet technology. Plasticising unit complete thermoplasticisation unit screw diameter 22 mm nozzle radius 10 mm, nozzle opening 4 mm Clamping force [kN] 500 Clamping plate dimensions (hxv) [mm] 490 x 440 Clearance between columns (hxv) [mm] 370 x 320 Min./ max. mould height [mm] 150 - 450 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection size [g] 35 Injection pressure [bar] 2500 Electric-hydraulic equipment Pump motor rated power [kW] 6.1 Heater power [kW] 6.3 Dimensions and weight Net weight with control unit [t] 4 Dimensions (L x W x H) [m] 4.2 x 1.44 x 1.85

Year of construction: 2006, Condition: excellent (used), Injection moulding machine Demag Extra 160-600 Year of manufacture 2006 Clamping force 1600 kN Tool opening stroke 500mm Minimum mould height 275mm Maximum mould height 585mm Maximum distance between plates 1085mm Size of clamping plates 770 x 770mm Spacing between columns 520 x 520mm Maximum tool weight 2200kg Ejector stroke 160mm Ejector force 59kN Auger diameter 45mm L/D 20 Specific injection pressure 1910 bar Debvbepiqhrjcr Hekl Injection volume 323 ccm Injection mass (PS) 291g Heater power 11.3 kW Pump motor power 22kW Oil tank capacity 220l Machine weight 6400 kg Dimensions (L x W x H) 5.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2000, Injection molding machine Arburg 420 C 1000-250 Year of manufacture 2000 Selogica control Closing zone Closing force 1000 kN Minimum mould height Dkjbeqqkqljvbcr Hel Column spacing 420 x 420 mm Mounting plate dimension 605 x 605mm Opening stroke of mold 500mm Maximum opening width 750mm Injection unit Screw diameter 35mm Injection weight (ps) 132g Injection volume 144cm3 Specific injection pressure 1820bar Power supply and dimensions Pump motor power 18.5 kW Heater power 6.5 kW Weight of the machine 3.18T Dimensions (L x W x H) 4.3m x 1.7m x 1.8m

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 65/210 injection molding machine Debsu U A Ivsvbcr Hokl Year of manufacture - 2009 Control - Unilog B6E Closing unit : - maximum closing force : 650 kN - clearance between columns : 370 x 320 mm - minimum mold height : 225 mm - mold opening path/force : 450/35 mm/kN - maximum possible distance between clamping plates : 675 mm - ejector travel/force : 150/26.4 mm/kN Injection unit : - screw diameter : 30 mm - specific injection pressure : 2042 bar - calculated injection volume : 106 cm3 - L/D ratio of screw : 22 - screw speed : 310 min to -1 - maximum screw torque : 490 Nm - plasticization capacity : 12.0 g/s PS Technical parameters : - power of drive system : 11 kW - dry cycle time according to EUROMAP 6 : 1.8-259 s-mm - oil tank capacity : 200 l - machine dimensions : 3.6x1.4x2.0 m - weight of the injection machine : 3100 kg

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 110/350 injection molding machine Year of manufacture :2012 Dobvbcsu U Ar Isr Hekl Control : Unilog B6 E Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection volume: 153 g Closing unit : Closing force : 1100 kN Distance between columns : 470 x 420 mm Mold height min: 275 mm Opening : 500 mm Mould height max : 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight : 4,500 kg Equipment: - The machine is in very good condition and has 35,000 hours of operation. - Bimetallic system - 1 x pneumatic valve - 1 x pulling core - Interface for the robot in accordance with EUROMAP 67

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot LRX 500 Year of production - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 Dobvbeu E Rkcocr Hokl - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), Year of construction: 2007, Krauss Maffei KM 950-17200 MX injection molding machine Year of manufacture - 2007 Wittmann robot W 842 -2016 year X-1200 mm Y-1600 mm Z-4000 mm Fully hydraulic locking system. Industrial computer based control system with integrated control panel with color touch screen display Plasticizing system Complete plasticizing system for thermoplastics HPS-UN high-performance screw with a diameter of 120 mm Nozzle radius: 30 mm Nozzle opening: 12 mm Closing zone Closing force 9500 kN Opening force 665 kN Column spacing 1400 x 1150 mm Mounting plate dimension 1960 x 1710 mm Opening stroke 1900mm Min/Max mould height 500mm/1200mm Maximum opening width 2400mm Ejector stroke 300mm Injection unit Screw diameter 120mm Injection weight (HDPE) 5420g Dkjbvbcrsu E N I Ts Hol Injection volume 7634 cm3 Specific injection pressure 2257 bar Dimensions : Weight of the machine 61.5 t Dimensions (L x W x H) 12.77 x 3.42 x 2.75m

Condition: good (used), Year of construction: 2004, Battenfled injection molding machine HM 8000 2P / 5400 B4 Year of manufacture - 2004 Closing force 8000 kN Opening stroke 1175 mm Mould height min/max 450-950 mm Clearance between plates 2125 mm Clearance between columns 1310 x 1210 mm Auger diameter 100mm Injection pressure 1613 bar Injection volume 3338 ccm Dkjbvbceu Eqy Rer Hol Weight of PS injection 3038 g Weight of PE injection 2370 g Plasticizing speed 190 min-1 2 x hydraulic core 2 x air valve Euromap 67 for the robot

Condition: good (used), Year of construction: 2004, BATTENFELD HM 10000 2P/9200 injection molding machine Control system: UNILOG B4 Year of construction: 2004 Closing system Closing force : 10000 kN Column spacing h x v: 1120 x 1400 mm Plate dimensions h x v: 1960 x 1690 mm Mounting height min: 550 mm Mounting height max: 1020 mm Opening stroke: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Moving plate centering D: 250 mm Centering of fixed plate D: 315 mm Injection system Screw diameter: 120 mm Injection volume : 5655 ccm Dksbvbou Egp Ujcr Hol Injection weight : 5146 g Injection pressure: 1632 bar Screw length : 22 l/d Screw stroke : 500 mm Screw speed: 130 min Screw torque: 11370 N Dimensions and weight Machine dimensions LxWxH: 11.6m x 2.9m x 2.5m Total weight: 76500 kg Equipment 2 x core on fixed plate, MOOG control 2 x mold pneumatic nozzle control on fixed plate 1x hydraulic mold nozzle control on fixed plate 2 x pneumatic blow-off valves on moving plate