Year of construction: 2000, Condition: good (used), Wittmann Teachbox Tested , fully functional Cgjln Uw Hjvl Siiedjt

Condition: repair required (used), Year of construction: 2006, Functionality: limited functionality, clamping force: 2,200 kN, Equipment: documentation/manual, For sale is an Engel Victory 1350/220 Tech from 2006. The machine is currently in need of repair as the hydraulic pump needs to be replaced. An offer for the repair from the original manufacturer Engel is available, with a cost estimate of approx. 20,000 €. Cjln Uovkgdlew Hdogt Apart from this defect, the machine is in very good condition and has always been well maintained. Additional information: Viewing possible by appointment. The offer for the repair can be viewed on request.

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Celsvu Szwen Uw Hdjgt Screw: 45mm Core pulls: 1x Hot runner: 6x incl. conveyor belt

Condition: excellent (used), Year of construction: 2010, Arburg 720S 3000-1300 injection molding machine Multilift robot Year of production - 2010 Colsvu Hrqsn Uw Hdjgt Closing system: Closing force: 3200 kN Column spacing h x v: 720 x 720 mm Plate dimensions h x v: 1040 x 1040 mm Min. mounting height: 300 mm Max. mounting height: 700 mm Maximum distance between plates: 1400 mm Opening stroke: 700 mm Ejector stroke: 250 mm Ejector force: 100 kN Moving plate centering D: 165 mm Fixed plate centering D: 165 mm Mold weight: 3600 kg Injection system: Screw diameter: 60 mm Stroke volume: 664 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw pitch: 235 mm Screw torque: 1640 N Plasticizing flow: 306 g/s PS Number of heating zones: 8 Nozzle path: 550 mm Dimensions and weight Machine dimensions LxWxH: 6.8m x 2.1m x 2.2m Total weight: 17500 kg

Condition: used, Year of construction: 2005, operating hours: 76,170 h, machine/vehicle number: 61006498, screw diameter: 50 mm, injection pressure: 1.892 bar, total length: 4,660 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,200 kg, Equipment: documentation/manual, Technical Specifications : Type : 125-700 C2 Year of construction : 2005 Clamping force : 1250 kN Mould opening force : 70 kN Travel force movable platen opening : 35 kN Travel force movable platen closing : 28 kN Size of mould platens (h x v) : 745 x 770 mm Distance between tie bars (h x v) : 470 x 470 mm Mould opening stroke : 600 mm Mould height min.: 300 mm Max. daylight : 900 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 50 mm Injection pressure : 1892 bar Stroke volume : 377 cm³ Pump drive power : 22 kW Heating power : 16 kW Oil filling (l) 345 Dimensions: 4.66 x 1.51 x 2.19 m Total machine weight : 6200 kg Max. mould weight : 1485 kg Coln Uw Hjvf Igksdogt Availability : two identical machines

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Type: HM 10000-9200 Control system: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing side Coln Usrdyq Rsw Hdogt Clamping force: 10000 kN Tie bar dimensions h x v: 1120 x 1400 mm Panel size h x v: 1960 x 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm Panel distance max.: 2120 mm Opening stroke: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering of fixed plate D: 315 mm Technical data injection side Screw diameter: 120 mm Stroke volume: 5655 ccm Injection pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing flow: 144 g/s PS Injection flow into the atmosphere: 1144 g/s PS Number of heating zones: 8 Nozzle path: 700 mm Dimensions & weight Machine dimensions LxWxH: 11.6m x 2.9m x 2.5m Total weight: 76500KG Equipment On-screen text German Compact flash drive Hydraulic core pull 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler mold heating 16x

Condition: used, Year of construction: 1989, Technical details: screw size: mm injection shot weight in Polysterol: g/PS Cjln Uwsizlfks Hdogt closing pressure: 1100 kN

Condition: excellent (used), Year of construction: 2005, Arburg 370S-800-150 Closing 80 TO Scrow 30 mm Bar spacing 37x37 Control S Year 2005 Operating hours 46201 ST Plus sprue picker Cjlnoidmc Is Uw Hdogt

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, clamping force: 350 kN, For sale is an injection molding machine from the manufacturer Arburg, model: Allrounder 270 S 350-60 Technical Data: - Year of manufacture: 1998 - Clamping force: 350 kN - Drive: Hydraulic Celsurhphon Uw Hdogt The machine is in very good condition and has been regularly serviced. It is fully functional and ready for immediate use. It also offers high precision and reliability in production. The machine can be inspected on site by telephone appointment.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100 – 12000 MX injection molding machine Robot - Wittmann Year of production - 2008 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, screw diameter 120 mm, with non-return lock and open nozzle TECHNICAL DATA Closing unit - Mold closing force: kN 11000 - Mold opening force: kN 770 - Dimensions of the mounting plate (h x v): mm 2210 x 1910 - Clearance between columns (h x v): mm 1550 x 1250 - Mold opening path: mm 2000 - Mold installation height (min - max): mm 600 - 1200 - Plate opening stroke: mm 2600 - Ejector stroke: mm 300 - Ejector force: kN 220/110 Injection unit - Screw diameter: mm 120 - Pressure injection: bar 1758 - Injection volume: cm3 6786 - Injection weight for PS: g 6175 - Number of screw revolutions, standard/option: rpm 103/145 - Injection efficiency (standard) ccm/s 1118 - Injection efficiency (accumulator) ccm/s 1696 Electric-hydraulic equipment - Nominal power of the pump motor: kW 132 - Installed power of heaters: kW 82 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 802 - Oil tank capacity: l 2440 Dimensions and weight - Net weight with control cabinet: t 73 Coln Uwsvu Hp Ao Hdsgt - Machine dimensions (length x width x height): m 12.47 x 3.65 x 2.82

Condition: excellent (used), Year of construction: 2003, operating hours: 54,000 h, Functionality: fully functional, machine/vehicle number: 75-268, clamping force: 270 kN, screw diameter: 52 mm, clearance between the columns: 630 mm, displacement volume: 580 cm³, injection pressure: 2.2 bar, injection weight: 580 g, mold height (min.): 250 mm, plate width: 940 mm, plate height: 880 mm, total length: 6,000 mm, total width: 2,000 mm, total height: 3,500 mm, overall weight: 10,000 kg, connection type: Euromap, The machine has been fully operationnal until last month, the machine is including a Dal Maschio Robot from 2013 : DMG Type 3 ; DMGP4999 Celnsq Nn Ito Uw Hdogt

Condition: excellent (used), Year of construction: 2016, operating hours: 18,667 h, clamping force: 420 kN, Year: 2016 Type of control: NC5 Number of hours: 18,697 H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Mold min/max: 350/1020 mm Max gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 Motor power: 135 kw Heating power: 27.9 kw Cgslsvtnc Usn Uw Hdet Closing weight: Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Dimensions height: 2.70 m Cores: Robot interface: YES Bi-metal: YES Others: 8 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Condition: used, Year of construction: 2007, Technical details: closing pressure: 3500 kN weight of the machine ca.: 17 t Cgslnjtvhwde Uw Hdot

Condition: excellent (used), Year of construction: 1999, Battenfeld 400-125 CDC Closing 40 tons Year 1995 Scrow 30 mm Injection weighted 77,8 g Celetputien Uw Hdegt Spar spacing 27x32

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v injection molding machine - 2K machine Year of production: 2005 Control type: NC 4 Control Closing system: Hydraulic TECHNICAL DATA Closing force: 800 kN Clearance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mould size: min 250 mm Maximum opening path: 500 mm Maximum distance between plates: 750 mm Two-component machine 1/Horizontal nitrided system, screw diameter 18 mm 2/Vertical system, bimetallic screw diameter 25 mm Full machine history available GENERAL DATA Motor: 18.5 kW Heaters: 8.8 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Cgslsvuzz Hon Uw Hdst EQUIPMENT Language: German

Condition: excellent (used), Year of construction: 2011, operating hours: 37,500 h, Functionality: fully functional, machine/vehicle number: 181517, clamping force: 4,000 kN, screw diameter: 60 mm, injection weight: 700 g, Injection machine 2K 60 mm - 35 mm, in very good condition with few hours of work. Machine in operation in Sabadell. Machine equipped with a Wittmann robot of 2014. With safety grid and 2 belts. Celsvgq Hpon Uw Hdegt

Condition: used, Year of construction: 2003, Technical details: closing pressure: 3500 kN Cjlnotvhwts Uw Hdegt

Condition: excellent (used), Year of construction: 1998, Angel ES 650W500V/200HL. 2F 2 component machine tie-bar-less 2000 KN clamping force Screw diameter Aggr.1: 45 mm, Aggr.2: 45 mm Max. Stroke volume Aggr.1: 226 cm³, Aggr.2: 183 cm³ Cgeln Uwsgrafvj Hdst Installation dimensions WKZ: min 250 mm, max 750 m Year of manufacture: 1998

Condition: excellent (used), Year of construction: 2004, Battenfeld HM 2700 / 1330 injection molding machine Year of production - 2004 Control - Unilog B4 Closing system : Closing force : 2.700 kN Mold platen size (h x v): 1030 mm x 1020 mm Distance between columns (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Min. mold height: 350 mm Maximum mold height: --- mm Max. daylight: 1150 mm Hydraulic ejector - stroke: 200 mm Ejector force forward/backward: 59 kN Injection system : Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2041 bar Sweep volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Csln Uw Hsvt Rutjdsgt Screw speed: 318 1/min Maximum plasticization rate: 59.3 g/sec. Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating power: 18.2 kW Adjustable drum heating zones: 1+4 Oil tank capacity - 650 l Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H) 5.6 x 1.8 x 2.2 m

Condition: used, Year of construction: 2000, Technical details: Cgjln Uetvhw Tjw Hdet closing pressure: 2000 kN

Condition: excellent (used), Year of construction: 1999, Angel ES(VC) 4450/600HL Closing 600 TO Year 1999 Scrow PP/PVC D90 mm PP/PVC Cylinder with extra groove For PP, PE,... Celnogrkr Tj Uw Hdjgt Spraying weight 2480 cm Clamping plate size hear. XVer. 1480x1300 Mould height min 500 mm Operating hours ca 94600 ST

Condition: used, Year of construction: 1998, Technical details: Cjln Uwotvhwlo Hdegt closing pressure: 5000 kN weight of the machine ca.: 25 t

Condition: excellent (used), Year of construction: 2011, Injection cylinder 4450 unit Year 2011 Cgjln Uw Hjgrzhhsdot Scrow 105mm PVC cylinder with normal screw(no PVC screw)

Condition: excellent (used), Year of construction: 2001, Krauss Maffei Coln Ujg U Ar Rew Hdjgt KM 125-50 C year 2001 Closing 50 TO

Condition: excellent (used), Year of construction: 1991, Klöckner formetk FM 160 Scrow 60mm Year 1991 Cjln Uehrw Aiew Hdegt Closing 160 TO