Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Cgsb Hhvjva Ht Sophot Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Condition: new, We offer fast delivery of new injection molding machines. Delivery time = transportation time from the warehouse: Ceberbhfus Hhvphsgt from Wroclaw and Germany with closing force from 60 to 328 tons and from the warehouse in China from 60 to 800 tons Hydraulic injection molding machines of three and two plates up to 6500 tons of closing force on request.

Condition: excellent (used), Year of construction: 2019, operating hours: 9,900 h, Functionality: fully functional, Injection molding machine Engel VC200/50 Year of manufacture 2019 / approx. 9900 operating hours Engel control system Csb Hevx T U Tohvphsgt Total height: approx. 1,800 mm Total length: approx. 3,800 mm Total width: approx. 1,500 mm Total weight approx. 2,900 kg Clamping force 500 KN Screw diameter 30 mm Table ejector stroke 100 mm Injection pressure 200 bar Heating zones 4 10x heating channel / core pull on ejector side Opening stroke max. 400 mm Robot pneumatics Engel ER-USP5 (year of manufacture 2019) Dryer Motan Luxor CA 15

Condition: good (used), Year of construction: 2004, operating hours: 66,973 h, Functionality: fully functional, machine/vehicle number: 28109, screw diameter: 22 mm, injection pressure: 2,864 bar, total length: 2,270 mm, total width: 1,118 mm, total height: 1,800 mm, overall weight: 2,000 kg, heating capacity: 3.8 kW (5.17 HP), power: 11 kW (14.96 HP), input frequency: 50 Hz, input voltage: 230 V, input current: 80 A, Equipment: documentation/manual, Battenfeld injection molding machine in good condition, disconnected in mid-2024 to make room for a new machine in the department. Fully functional, with EEC declaration of conformity. Cgjb Hhjvx Tflovphet

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Cgeb Hjiiv Aqehvphjt

Condition: excellent (used), Year of construction: 1997, Clamping force: 80 t Cgeb Hhsvfr U Eevphot Screw diameter: 40 mm Type: Horizontal Drive: Hydraulic

Year of construction: 2012, Condition: ready for operation (used), There are three identical machines available, screw diameter: 70mm, operational hours counter machine 1/ 2/ 3: 65,000/ 60,000/ 46,345h, year of construction machine 1/ 2/ 3: 2007/ 2008/ 2012, for each machine there is one Handling Robot Wittmann W731 available. Cgjb Hhvpeidyd Sehst

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation. Cgjb Hhvpsmk Taajhst

Year of construction: 2014, Condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Cob Hhvpjh Nypfshegt

Year of construction: 1999, Condition: ready for operation (used), Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power. Cgeb Hhvpenxk Ifohet

Year of construction: 2017, Condition: ready for operation (used), Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation. Cgjb Hhvpsk N Dndohst

Year of construction: 2000, Condition: ready for operation (used), Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h. Cjb Hhveq Sxhfephegt

Year of construction: 1995, Condition: ready for operation (used), Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t. Cgeb Hhvoh H Nrzjphet

Year of construction: 1991, Condition: ready for operation (used), Clamping force: 800kN, weight: 4.3t. Cob Hhvoh I T D Aophogt

Year of construction: 2008, Condition: ready for operation (used), Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t. Cgob Hhvpjmrrh Ushot

Year of construction: 1986, Condition: ready for operation (used), Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed. Cob Hhvspvkzyjphegt

Year of construction: 1995, Condition: ready for operation (used), Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools. Cobjlc N Saj Hhvphegt

Year of construction: 2003, Condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Cgjb Hhvemrri Dophjt

Year of construction: 2007, Condition: ready for operation (used), Hydraulic operating pressure: 275bar, weight: 4.1t. Csbom Ncizj Hhvphjgt

Year of construction: 2004, Condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Csb Hhvpop S Srhshegt

Year of construction: 2022, Condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Cgsb Hhsvpvlcsvphet

Year of construction: 2001, Condition: ready for operation (used), Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm. Csb Hhvjr A Eiisphegt

Condition: ready for operation (used), Year of construction: 2003, max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg. Cgsb Hhor Dd Iaovphet

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Cgsb Hhst E Tq Rjvphet

Year of construction: 1998, Condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Cjb Hhvpjviv Dfehegt