Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Dolralqeum U S Eokskl

Condition: excellent (used), Year of construction: 2006, operating hours: 10,542 h, Functionality: fully functional, clamping force: 10 kN, screw diameter: 160 mm, clearance between the columns: 1,090 mm, displacement volume: 14,654 cm³, injection pressure: 1,250 bar, injection weight: 15,970 g, opening stroke: 1,200 mm, plate width: 1,628 mm, plate height: 1,580 mm, total length: 15,300 mm, total width: 3,700 mm, total height: 4,300 mm, overall weight: 63,000 kg, heating capacity: 110 kW (149.56 HP), pump power: 155,000 W, input voltage: 400 V, Equipment: documentation/manual, Closing force: 1000 T Between columns: 1090 x 1090 mm Opening stroke: 1100 mm Mold thickness: 500-1100 mm Screw diameter : 160 mm Injectable volume: 14654 cm3 PVC injectable weight: 15970 gr Injection pressure: 1250 bars Pump power: 45 + 55 +55 kw Oil tank: 3050 L Machine dimensions: 15.3 x 3.7 x 4.3 + DAL MASCHIO robot Machine dismantled, transport by 3 trucks: -20T -22.3T -20.5T Dkjljlcdk Ejralqkel Charging included

Condition: used, Year of construction: 2005, operating hours: 62,235 h, Functionality: fully functional, screw diameter: 70 mm, overall weight: 25,100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection molding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tons and the screw diameter is 70 mm. Technical data at a glance: - Year of construction: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Tool installation height: 350–1,000 mm - Clamping plate size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 dosing device - ENGEL ERC linear handling system - Longitudinal structure - Removal cell with machine housing - Separating cardboard feeder - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series enables free access to the tool area, which allows the use of larger tools on smaller machines, thus increasing efficiency. This design also offers advantages in automation, as robots and peripherals can be more easily integrated. The machine is equipped with the ENGEL control system, which is known for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the need for cooling water. In addition, the machine has a MORETTO dosing device and an ENGEL linear handling system, which supports production automation and increases overall productivity. Dkolrasvxzw Nslqkel With a total of 62,235 operating hours, the machine is in a used but functional condition.

Condition: good (used), Year of construction: 2002, Clamping force: 1000 ton Mould Height Min/Max: 600-1200mm Platen size: 2000x 1830 mm Column distance: 1400x1150 mm Dolraou Aw Eholqkjkl Screw: 120mm Injection Volume: 6450 cm3 Injection pressure: 1480 bar Heating power: 80 kW Motor power: 130 kW has 3 hydraulic cores - 2 moving plate, 1 fixed platehas 4 hydraulic closing nozzles (cascades)has 4 air valves2 x end caps for Flomo fixed board, 2 x movable board2 control valves for gas (nitrogen)4 x programmable input4 x programmable output12 x mold heatingintegrated Engel robot Robot Engel ERC

Condition: good (used), Temperature Card ARBURG Dialogica 7204-3504C1 SN 126.642 Dkslrsmxk D Sjalqkol yPIII function tested

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Desma polyurethane processing plant, fully functional, in operation, converted to use KraussMaffei mixing heads, pumps 2x 16l Hydromatik, flow indicators, unregulated, electronic pressure switch and display, 12 programs, motor encapsulation, mixing head negotiable Dolrjt A Ugusalqkjkl

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Dkjlraetthr Nolqkol

Year of construction: 2001, Condition: excellent (used), BI-MATERIAL injection molding machine Main injection group screw diam 70, volume 1212 cm3 Vertical annex injection group, screw diam 35, volume 170 cm3 Hydraulic core : 6 Air blast : 2 Interface robot Accumulator on main injection Mold pressure sensor pre-equipment 32 hot runner control zones Electric motor on main unit screws Automatic tie bar extraction Between columns 1025 x 1025 mm (large platens) Dkolralqoiw Ia Ssksl

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output Dslralqevdqbhekekl 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: good (used), Year of construction: 1998, machine/vehicle number: 8621090, overall weight: 27,000 kg, Year 1998 / Serial No. 8621090 Dkolrevw A Efealqkjl Closing force 500 Tns / Mold table 1300 x 1200mm Max. mold opening stroke 810 mm Min/max mold height 400 - 880 mm / Max. mold weight 6700 Kgs Machine weight approx. 27,000 Kgs. Approx. dimensions 9500 x 2400 x 2500 mm

Condition: good (used), Ralaiscard Modul +B02 NR 006353 Djlralsmxky Djqkekl SN 138.245A

Year of construction: 1997, Condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Dkslerc Hibsralqkol

Condition: like new (used), Year of construction: 1994, Vertical machine Clamping force: 350kn Screw D:25 Working hours: ONLY 8.000h Dolrspcf Dcoalqkokl All technical information on pictures.

Condition: excellent (used), Functionality: fully functional, ARBURG control cabinet temperature chart. Delralqerh E I Rjkjkl ARBURG 730 S-N 139.656 A ARB 730 SN. 139.655 V. 01

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Dkjlralqeilhfcoksl

Condition: excellent (used), ARBURG Circuit Board 533 C B 41 Delralsm Dtlzsqkokl SN 94. 519 S-N 97.940 NR. 00202

Year of construction: 1999, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Djlret E Trhealqkekl

Year of construction: 2009, Condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Dolralqou Afz Djkekl

Year of construction: 2016, Condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Dkolralougmx Asqkjl

Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Delrajrk Rxqelqkekl

Year of construction: 2018, Condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Dkolralqor N Rh Hjksl

Year of construction: 2010, Condition: ready for operation (used), There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible. Dolraou St I Rslqkokl

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 400kN, min. installation height: 200mm, max. drive-up distance: 500mm, barrel diameter: 15mm, max. screw volume: 17cm³, number of core pulls: 2. Dkelralottbfbjqksl

Year of construction: 1998, Condition: ready for operation (used), Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. Dslettbffjralqkskl

Year of construction: 1993, Condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Deljvb Hbferalqkskl