Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201807012051958, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 186 bar, injection weight: 194 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 450 mm, plate length: 615 mm, plate width: 615 mm, total length: 4,820 mm, total width: 1,320 mm, total height: 2,120 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 194 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 33 kW Machine dimensions (l x w x h) 4.82 x 1.32 x 2.12 m Dsb Eov Sq D Ejahg Dout Machine weight 4.4 T

Condition: used, Year of construction: 2007, Clamping force: 12,5 t Screw diameter: 22 mm Djbsv Hxx Ts Eahg Dsut Shot weight: 31 g Shot volume: 34 cm3 Mould height: 100 mm Ejector force: 16 max. kN Screw stroke: 90 mm Injection pressure: 2000 bar Working hours: 42504 in automatic cycle Type: Vertical Drive: Hydraulic

Condition: good (used), Year of construction: 2006, operating hours: 62,149 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,615 bar, total length: 6,800 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 12,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine ENGELVictory 1050-220 TECH warehouse no.: 503559 manufacturer: ENGEL type: Victory 1050-220 TECH controller: CC100 year of construction: 2006 operation hours: 62149 h technical data clamping unit clamping force: 2200 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1045 mm opening stroke: 755 mm ejector stroke: 180 mm ejector force: 80 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1615 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 230 min plasticising rate: 55 g/s PS injection rate into the open: 255 g/s PS number of heating zones: 5 nozzle stroke: 350 mm measures & weight measures of machine l x w x h: 6.8m x 1.8m x 2.4m total weight: 12900KG equipment included screen text german machine incl. Handling Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI 61 Dsb Eaov Hw Tvshg Dsut

Condition: ready for operation (used), Year of construction: 2006, Main Drive Main motor power 55KW Stroke 600mm Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes Main Drive Main motor power 55KW Stroke 600mm Dujb Eajupm R Sjhg Dot Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes This Battenfeld TM 270 / 2800 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 620 x 620 mm and an opening stroke of 600 mm. Equipped with 2 core valves, 4 air valves, and an EU 12 interface for robot connection. A solid choice for enhancing production capabilities. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, Functionality: fully functional, clamping force: 200 kN, For sale is an injection molding machine of the brand KraussMaffei and the type KM 200-220/220 CZ Multinject The machine is in a fully functional and well-maintained condition Technical data Year of construction: 2007 Dueb Eahsrvimbeg Det Clamping force: 200 t Aggregates: 2 Automatic hours: 47 963 Dimensions: 5200*2200*2700 mm Weight: 11,500 kg Further technical data will follow shortly Offer refers only to the machine, the peripherals shown in the pictures are not part of the offer On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2007, operating hours: 68,000 h, Functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,600 bar, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, injection moulding machine ENGEL Victory 330-120 Tech warehouse no.: 503558 manufacturer: ENGEL Dob Eahjv Hp S Rsg Dout type: Victory 330-120 Tech controller: CC100 year of construction: 2007 operation hours: 68000 h technical data clamping unit clamping force: 1200 kN size of mould plates h x v: 740 x 470 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 825 kg technical data injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar screw length: 20 l/d screw stroke: 160 mm screw speed: 400 min injection rate into the open: 151 g/s PS number of heating zones: 4 nozzle stroke: 250 mm measures & weight measures of machine l x w x h: 5.1m x 1.5m x 2.1m total weight: 7300KG equipment included screen text german Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI41VC year of construction: 2007

Year of construction: 2021, Condition: ready for operation (used), Injection Unit Screw diameter 70 mm Injection pressure 270 mm/s Clamping Unit Ejector stroke 250 mm Ejector force for / back 100 kn Additional Equipment High-resolution rotary encoder Dsb Eahsuwf I Tog Dout Integrated servohydraulics for precise control of movements Active mold protection and ejector monitoring This SUMITOMO SHI DEMAG IntElect2 500/920-2200 was manufactured in 2021. It features a screw diameter of 70 mm, a stroke of 250 mm, and a force of 100 kN. Equipped with high-resolution rotary encoder and integrated servohydraulics, it ensures precise control of movements. Ideal for those seeking the SUMITOMO SHI DEMAG IntElect2 machine we have for sale. Contact us for further details regarding this electrical injection moulding machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, injection moulding machine ENGELVictory 200-80 Tech warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC 100 year of construction: 2005 operation hours: 76988 h technical data clamping unit clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 675 kg technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar screw length: 20 l/d Dsbjv Hpufe Eahg Dout screw stroke: 140 mm plasticising rate: 17 g/s PS injection rate into the open: 150 g/s PS number of heating zones: 4 nozzle stroke: 200 mm measures & weight measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg

Year of construction: 2005, operating hours: 92,980 h, Condition: ready for operation (used), This Engel Victory 750/200 Tech hydraulic injection moulding machine was manufactured in 2005. Consider the opportunity to buy this Engel Victory 750/200 Tech hydraulic injection moulding machine. Contact us for more information. Dujb Eaev Dym Hohg Det Application Types Injection Moulding

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, Functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, injection moulding machine ENGEL Victory 200-28 Tech warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 technical data clamping unit clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 450 kg technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar screw length: 17 l/d screw stroke: 140 mm screw speed: 480 min injection rate into the open: 78 g/s PS number of heating zones: 4 nozzle stroke: 230 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG Duob Eahjv Hpn Eog Dst equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1610 Measurements depth 5820 Measurements height 2010 Machine weight 8200 Injection Unit Screw diameter 60 mm Shot weight 651 g Stroke volume 715 cm^3 Injection pressure 1556 bar Duobsv Ezqcs Eahg Det Clamping Unit Clamping force 2500 kn Opening stroke 1150 mm Distance between bars 580 x 580 mm Mould height max 600 mm Size of mold platens 860 x 860 mm Ejector stroke 160 mm Ejector force for / back 67 kn Additional Equipment Equipped with a servo drive - energy saving energy 30-70% compared to a machine with a constant pump 2x sequences of core pullers EUROMAP 67 interface This INVERA Intec 250/1110 was manufactured in 2016. A hydraulic injection moulding machine featuring a screw diameter of 60 mm and a clamping force of 2500 kN. It supports a max mold weight of 850 kg and is equipped with a servo drive, offering energy savings of 30-70%. Ideal for efficient, high-quality molding operations. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,626 h, General Data Machine weight 11600 kg Injection Unit Screw diameter 50 mm Shot weight 361 g Injection pressure 392 cm³ Djb Esvyl R Asahg Deut Clamping Unit Clamping force 2200 kN This Engel Victory 750H/330V/220 combi was manufactured in 2011. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 750H/330V/220 combi. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, Injection Unit Screw diameter 100 mm Clamping Unit Clamping force 800 t Max open daylight 2225 mm Distance between bars 1120 mm Mould height min 500 mm Dsb Eaev Adciohg Dsut Mould height max 1175 mm Size of mold platens 784 mm Ejector stroke 250 mm This Battenfeld HM 8000/4500 + 4500 BMB 4 was manufactured in 2006. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this Battenfeld HM 8000/4500 + 4500 BMB 4 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5300 Control Unit Brand ENGEL Model eco victory 500/80 Injection Unit Screw diameter 45 mm Stroke volume 306 ccm Injection pressure Specific max 1598 bar Screw speed 162.2ccm/s max Clamping Unit Clamping force 800 kN Opening stroke 458 mm Mould height min 300 mm Mould height max 900 mm Size of mold platens 670 mm x 670 mm Ejector stroke 100 mm Ejector force for / back 39.8 kN Additional Equipment Core pull DS 1 time AS 2 times This hydraulic injection moulding machine was manufactured in 2011. It features an 800 kN clamping force and a screw diameter of 45mm, capable of a shot volume of 306ccm. The platen size is 670mmx670mm, and it can handle a mould opening height from 300mm to 900mm. Consider the opportunity to buy this Engel VICTORY 500/80 hydraulic injection moulding machine. Contact us for more information about this machine. Dob Eahgevw En Ne Djut Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 6000 mm Measurements depth 7000 mm Injection Unit Stroke volume 141 ccm Injection pressure 2500 bar Clamping Unit Clamping force 1600 kN Distance between bars 520 mm Additional Equipment Removal: Robot 4x Temperature Control Units: Thermo 5 Language Options: German, English, Czech Maximum opening: 575 mm / Maximum plate distance: 1025 mm / Maximum ejector length: 175 mm Coupling diameter: 32 mm / Center ring diameter: 125 mm Valve gate: 6 HK Control points: 42 Number of hydraulic core pulls (Fixed side): 1 / Number of hydraulic core pulls (Moving side): 2 / Number of pneumatic core pulls (Fixed side): 2 General Data Measurements width 6000 mm Measurements depth 7000 mm Injection Unit Stroke volume 141 ccm Injection pressure 2500 bar Clamping Unit Clamping force 1600 kN Distance between bars 520 mm Additional Equipment Removal: Robot 4x Temperature Control Units: Thermo 5 Language Options: German, English, Czech Maximum opening: 575 mm / Maximum plate distance: 1025 mm / Maximum ejector length: 175 mm Coupling diameter: 32 mm / Center ring diameter: 125 mm Valve gate: 6 HK Control points: 42 Number of hydraulic core pulls (Fixed side): 1 / Number of hydraulic core pulls (Moving side): 2 / Number of pneumatic core pulls (Fixed side): 2 This Arburg Allrounder 520 S 1600-400 was manufactured in 2024. A hydraulic injection moulding machine, it represents a reliable option for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 520 S 1600-400 hydraulic injection moulding machine. Contact us for more information. Application Types Dujb Eaevtt Ezjhg Det Injection Moulding

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3750 Measurements depth 5750 Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Dusb Eahgsvucire Det Clamping Unit Clamping force 130 kn Max open daylight 579 mm Distance between bars 470 mm Mould height min 273 mm Additional Equipment Wittmann W721-0130 extraction unit 4x temperature control units: HB-Therm Thermo 5 Epson robots for selection This Arburg Allrounder 470 S 1300-350 was manufactured in 2005. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 470 S 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 1090 Measurements depth 4213 Measurements height 2040 Machine weight 2580 Tools Max weight 800 kg Injection Unit Screw diameter 28 / 32 / 38 / 42 mm Shot weight 71.1 / 92.3 / 129.8 / 158.9 g Stroke volume 2.30 / 2.00 / 2.28 / 2.24 Injection pressure 2778 / 2127 / 1508 / 1235 bar Screw speed 325 / 410 rpm Clamping Unit Clamping force 550 kn Opening stroke 38.0 kN Max open daylight 400 mm Distance between bars 380 x 335 mm Mould height min 250 mm Mould height max 650 mm Ejector stroke 24.4 kN Ejector force for / back 20.4 / 13.5 kN General Data Measurements width 1090 Measurements depth 4213 Measurements height 2040 Machine weight 2580 Tools Max weight 800 kg Dsb Esvparteahg Deut Injection Unit Screw diameter 28 / 32 / 38 / 42 mm Shot weight 71.1 / 92.3 / 129.8 / 158.9 g Stroke volume 2.30 / 2.00 / 2.28 / 2.24 Injection pressure 2778 / 2127 / 1508 / 1235 bar Screw speed 325 / 410 rpm Clamping Unit Clamping force 550 kn Opening stroke 38.0 kN Max open daylight 400 mm Distance between bars 380 x 335 mm Mould height min 250 mm Mould height max 650 mm Ejector stroke 24.4 kN Ejector force for / back 20.4 / 13.5 kN This hydraulic injection moulding machine was manufactured in 2006. The BOY 55A features a clamping force of 550 kN, a max. plate distance of 650 mm, and supports a max. tool weight of 800 kg. It offers a variety of screw diameters from 28 to 42 mm, enhancing its versatility for different injection pressures and volumes. Consider the opportunity to buy this BOY 55A hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 4050 mm Measurements depth 9200 mm Injection Unit Screw diameter 70 mm Stroke volume 1077 ccm Injection pressure 2200 bar Clamping Unit Clamping force 550 kN Distance between bars 920 mm Additional Equipment Plus Peripherals: 8x Temperature Control Unit Thermo 5 / Robot: KUKA KR30-3 This Arburg Allrounder 920 S 5000-2100 was manufactured in 2017. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 920 S 5000-2100 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Dujbsvtt Hls Eahg Djt

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Djboup Inle Eahg Deut Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Year of construction: 2004, Condition: ready for operation (used), Additional Equipment Dob Eahgovtt Iio Dsut Removal: W701-0142 2x Temperature Control Units: Series 4 Additional Equipment Removal: W701-0142 2x Temperature Control Units: Series 4 This Arburg Allrounder 270 S 250-60 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision in small-scale production. Consider the opportunity to buy this Arburg Allrounder 270 S 250-60 hydraulic injection moulding machine. Contact us for further details regarding this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 2300 Duob Eaevtt Ehohg Dot Measurements depth 4500 Injection Unit Screw diameter 30 mm Stroke volume 77 ccm Injection pressure 2210 bar Clamping Unit Clamping force 50 kn Opening stroke 354 mm Mould height max 223 mm Ejector stroke 125 mm This Arburg Allrounder 320 U 500-150 was manufactured in 2001. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 320 U 500-150 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2600 mm Measurements depth 5100 mm Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Clamping Unit Clamping force 130 kN Distance between bars 470 mm Additional Equipment Robot: Wittmann W621-1618 2x Temperature Control Units: HB-Therm Series 4 1x Temperature Control Unit: HB-Therm Thermo 5 Plus Peripherals General Data Measurements width 2600 mm Measurements depth 5100 mm Injection Unit Screw diameter 35 mm Stroke volume 139 ccm Injection pressure 2500 bar Duob Eahjvtt Hrjg Det Clamping Unit Clamping force 130 kN Distance between bars 470 mm Additional Equipment Robot: Wittmann W621-1618 2x Temperature Control Units: HB-Therm Series 4 1x Temperature Control Unit: HB-Therm Thermo 5 Plus Peripherals This Arburg Allrounder 470 S 1300-350 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 470 S 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, Injection Unit Screw diameter 40 mm Duob Eaev Ht Ezehg Dst Stroke volume 231 cm³ Injection pressure 1855 bars Clamping Unit Clamping force 125 tons This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included Injection Unit Screw diameter 80 mm Dob Eaev Ht Ngshg Dsut Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1997, Injection Unit Screw diameter 40 mm Stroke volume 40 mm Injection pressure 2402 bars Clamping Unit Clamping force 200 tons Ejector stroke 180 mm Dobsv Ht E Io Eahg Dout Additional Equipment SEPRO ROBOT INCLUDED This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. It's a robust option for efficient plastic processing tasks. Contact us for more information. Application Types Injection Moulding