Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Application Types Duobvdov T D R Ispgajt Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 3500 kN Mould opening force, max. 221 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v ) 1060 x 1095 mm Distance between tie bars (h x v) 710 x 710 mm Mould opening stroke 920 mm Mould height min 380 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 49 kN Injection unit: Screw diameter 55 mm Ls/D ratio 21,8 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Dobvdpewbivqjgaeut Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 7,00 x 2,30 x 2,40 m Total machine weight 17800 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - Anti vibration pads - integrated Krauss Maffei Robot LRX150 X: 900 mm Y: 1800 mm Z: 3500 mm C: 90° Additional Options: - 2 x hydr. core pull on movable plate - 1 x air valve - 8 x hotrunner controller - 2 x 5-fold water flower

Condition: excellent (used), Year of construction: 2015, Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Dusbvdpgjvplycoajt Drive: Hydraulic Controll CC200 Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 Machine was using DUROPLAST MATERIAL has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Approx 30.000 hours

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 YEAR 2003 Wear power 130 TO Scrow 40mm Debvdodv Tbfopgaout Stroke volume 220 cm Holmen far 52 x 47 Betreibsstunden ca 79800 h

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Duobvdpswa S Uaogajt Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Year of construction: 2015, Condition: ready for operation (used), General Data Djbvdpov T D N Djgaeut Machine weight 8500 kg This Engel Victory 330H/200V/120 Combi was manufactured in 2015. A hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 330H/200V/120 Combi hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2008, Demag System 500/900-3300 (2008) Clamping unit Clamping force: 500 tons Debvdpeukku Rsgaeut Platten dimension: 1300 x 1200 mm Distance between tie bars: 900 x 800 mm Mold height min. : 440 mm Mold height max. 880 mm Injection unit Screw diameter: 80 mm Injection pressure: 1855 bar Injection volume: 1779 cm3 Shot weight: 1620 g Transport dimensions Dimensions: 8,7 m x 2.3 m x 2,5 m Weight (clamping unit/injection unit): 16.500/5.400 kg 4x Core pullers Cascade control 2-way hydraulic EUROMAP 67 interface Additional connections for 2 core pulls on the fixed tool clamping plate 10-way cooling water flow regulator with temperature display Additional nozzle controller; 1 circuit; PID controller

Year of construction: 2003, Condition: excellent (used), Display - Demag Year approx 2003 Dobvehi Ttnjdpgaeut

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system Duebvjwa S Imjdpgaot complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: ready for operation (used), Year of construction: 1996, General Data Dujbvdpsv T D Rbegaot Machine weight 4000 kg Clamping Unit Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, Condition: good (used), 2x Piece Demag /Spritz clinder Duebvdpsd N Akyegast Long 150 cm Scrow 35 mm BJ ca 2005 Plus Spray clinder /Demag Long 130 cm Scrow 45 mm

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Ejector force: 61 kN Centring of moving platen D: 160 mm Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg Duobvdewa S Dzspgaet

Year of construction: 1999, operating hours: 116,061 h, Condition: ready for operation (used), This Arburg Allrounder 420 C 1000-250 was manufactured in 1999. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420 C 1000-250 hydraulic injection moulding machine. Contact us for further details regarding this machine. Application Types Injection Moulding Dusbvdpjv T D Rhogajt

Year of construction: 1997, Condition: excellent (used), Arburg 520C-220-675 Closing 220 TO Scrow 35 mm Dusbvdpef S A R Ajgajt Year 1997 Tie bars wide 52x52

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 35 - 100 CX injection molding machine Year of manufacture - 2007 Closing system : Clamping force: 350 kN Mould opening force, max.: 39.9 kN Moving platen feed force Opening: 21.6 kN Moving platen feed force Closing: 16.7 kN Mould platen size (h x v): 540 mm x 540 mm Distance between connecting rods (h x v): 320 mm x 320 mm Mould opening stroke: 350 mm Min. mould height: 175 mm Max. daylight: 525 mm Hydraulic ejector - stroke: 100 mm Dusbvdpswa Szgogaet Ejector force forward/backward: 22.6 / 9.9 kN Injection unit : Screw diameter: 22mm Ls/D ratio: 26 Injection pressure: 2500 bar Injection volume 38 ccm Injection weight, PS: 35 g Injection speed: 59 ccm/s Screw speed: 365 1/min Tank capacity: 215 ltr. Dimensions and weight Machine dimensions: 3.50 m x 1.50 m x 2.00 m

Condition: ready for operation (used), Year of construction: 2007, operating hours: 64,344 h, Injection Unit Stroke volume 16 ccm Clamping Unit Clamping force 400 kN Opening stroke 350 mm Distance between bars 270 mm Mould height min 200 mm Additional Equipment Oil Cooling: Programmable oil temperature regulation with heat exchanger. Injection Control: 3-stage injection regulation (30-290 mm/s). Nozzle Control Block: T2 type for 270-570 CG series. Clamping Unit: WKZ-Schließeinheit 270 CS (base configuration). Minimum installation height: 200 mm. Control System: CPU: Pentium III with USB interface. / I/O Cards: Digital (L-ARB 790) and analog (L-ARB 798) modules. /Temperature Control: 12-channel programmable card (L-ARB 777). S-Systemdiskette CS/S/A/U (Version 03.060-00.000). Direct Graphics Interface (Version 04.060-00.000). Coolant Distribution: Regulated coolant circuits with manual valves and measuring pipes. / Additional connections for free inlet/outlet. Injection Unit Stroke volume 16 ccm Clamping Unit Clamping force 400 kN Opening stroke 350 mm Distance between bars 270 mm Mould height min 200 mm Additional Equipment Oil Cooling: Programmable oil temperature regulation with heat exchanger. Injection Control: 3-stage injection regulation (30-290 mm/s). Nozzle Control Block: T2 type for 270-570 CG series. Clamping Unit: WKZ-Schließeinheit 270 CS (base configuration). Minimum installation height: 200 mm. Control System: CPU: Pentium III with USB interface. / I/O Cards: Digital (L-ARB 790) and analog (L-ARB 798) modules. /Temperature Control: 12-channel programmable card (L-ARB 777). S-Systemdiskette CS/S/A/U (Version 03.060-00.000). Direct Graphics Interface (Version 04.060-00.000). Coolant Distribution: Regulated coolant circuits with manual valves and measuring pipes. / Additional connections for free inlet/outlet. This Arburg Allrounder 270 C 400-70 was manufactured in 2007. A hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 270 C 400-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Duobvdpgsv T D Rzoaet

Year of construction: 2005, Condition: good (used), 2x Demag / Spritz clinder Dusbvswbak Ejdpgaot Long 150 cm Scrow 35 mm Year of manufacture approx. 2005 Plus Spritz clinder / Demag Long 130 cm Scrow 45 mm

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Closing elements: Closing force: 100 t Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Dimensions: Dobvdpowa Sx Esgasut Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment Dusbvdpewa Svksgast - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 50-380 CX injection molding machine Year of production - 2010 Number of operating hours -: 62135 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Tool closing system: - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Mould mounting plate movement force - - -- opening: kN 21.6 -- closing: kN 16.7 Djbvdpgswa Si Doaeut - Mounting plate dimensions (h x v): mm 600 x 600 - Clearance between columns (h x v): mm 370 x 370 - Mold opening path: mm 400 - Mold installation height: mm 200 - Plate opening stroke: mm 600 - Ejector stroke: mm 100 - Ejector force: kN 22.6/9.9 Unit injection - Screw diameter: mm 35 - Injection pressure: bar 2429 - Injection volume: cm3 154 - Injection weight for PS: g 140 - Screw speed, standard, option: rpm 295/375 Equipment: - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 2900 - Oil tank capacity: 1 220 Power supply: - Nominal power of the pump motor: kW 15 - Installed power of the heaters: kW 10.97 Machine dimensions and weight: - Net weight with control cabinet: t 3.0 - Machine dimensions (length x width x height): m 3.8 x 1.4 x 2.0

Condition: excellent (used), Year of construction: 2005, BOY 22A injection molding machine Year of production: 2005 Vertical / horizontal machine Technical data Screw diameter: 22 mm Injection volume: 30 ccm Weight: 28.45 g Injection pressure: 1732 bar Closing force: 220 kN Tie bar spacing: 254 mm Plate size: 220 x 400 mm Min mold height: 200 mm Debvdswa Sbyjpgasut Opening stroke: 200 mm Max plate spacing: 400 mm General Installed power: 9.05 kW Operating hours: 21,600 h Dimensions: Weight: 880 kg Equipment Monitor language: German

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Dujbvdpowa R T Iogaot Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: excellent (used), Year of construction: 2016, ENGEL Duo 4550/500 WPX injection molding machine Year of production - 2016 Viper 40 robot CC 300 control Closing system: Tie bar spacing - 990/1130 mm Min/max mold height - 450/1140 mm Opening stroke - 1400 mm Duobvdpewa Ebmsgajt Injection system: Closing force - 5000 kN Injection pressure - 1600 bar Screw diameter - 105 mm Injection volume - 3377 ccm Injection weight - 3073 g Core - 4 pieces on fixed plate Core - 4 pieces on fixed plate Pneumatic cascades - 10 pieces Hot runner control 40 zones

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 450 - 3500 C3 Sprinter injection machine Year of manufacture - 2008 Fully hydraulic two-platen clamping system. MC 4 control system with color monitor, integrated control panel, and built-in disk station Plasticizing system Complete HPS-UN plasticizing system for thermoplastics with a screw diameter of 90 mm. TECHNICAL DATA Closing unit - Closing force of mold: kN 4500 - Opening force of mold: kN 280 - Moving force of the moving plate fixing the mold - -. -- opening: kN 137 -- closing: kN 116 - Dimensions of clamping plate (h x v): mm 1270 x 1200 - Clearance between columns (h x v): mm 900 x 800 - Opening path of the mold: mm 1170 - Installation height of the mold: mm 480 - Opening width: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95/48 Injection unit - Auger diameter: mm 90 Auger drive by electric motor with increasing drive force. For independent and energy-saving plasticization for opening and closing - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Screw speed, standard, optional: rpm 149/247 - Injection capacity cm3/s 3817 - Injection capacity at: -- standard screw speed: g/s 103 -- increased screw speed: g/s 152 Electric-hydraulic equipment - Rated power of pump motor: kW 90 - Drive power of auger (electr.) kW 88 Duobvdpgsq Nlzhjajt - Installed power of heaters: kW 59 - Number of cylinder heating zones: - 9 - Dry cycle time according to Euromap: 1/h 1400 - Oil tank capacity: l 1075 Weight and dimensions - Net weight with control cabinet: t 26.3 - Dimensions of foundation space (L x W x H): m 7.98 x 2.35 x 2.51

Condition: ready for operation (used), Year of construction: 2012, Haitian Mars 4700/2250 injection molding machine Year of production -2012 Wittmann W 832-2012 robot X axis -900 mm Y axis -1600 mm Z axis -3000 mm Closing system: Clearance between columns - 800/820 mm Min/max mold height -320/780 mm Opening stroke - 1560 mm Injection system: Closing force - 4700 kN Injection pressure - 2110 bar Debvdpgewa Dr Djaout Screw diameter - 65 mm Injection volume - 1068 ccm Injection weight -972 g Equipment: 2x core - moving plate