Condition: ready for operation (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Controller version: MC 4 Number of operating hours 93,900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Feb Esv T Aw Te Aznvopg Max. mould height: 1800 mm Max. daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Injection weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143000 kg Maximum mold weight: 62000 kg LRX 1000 robot X-axis - 2000 mm Y-axis - 3000 mm Z-axis - 5000 mm

Year of construction: 1992, Condition: ready for operation (used), An injection molding machine with two units Klöckner Ferromatik Desma GmbH, Windsor plant Maintal is available. Stroke volume: 2x30150cm³, clamping force: 40000kN, injection pressure: 1800bar, cooling water requirement: 2x18.1m³/h, total power requirement: 2x700kW. Weight clamping unit: 2x175t, weight injection unit: 2x50t, total system weight: 450t. On-site inspection is possible. Fpob E Aznsv T Aqaevog

Condition: excellent (used), Year of construction: 2010, Arburg 1500T - 1600-400 (rotary) Table diameter: 1500 mm Clamping force: 160T Mould height min. mm : 400 mm Fjb E Azev Nag Donvjpg Screw dia: 40 mm Shot weight : 184g/PS

Year of construction: 2001, Condition: good (used), For sale complete clamping unit for Krauss-Maffei KM 350 with fix platen, moving platen, tie-bars, etc.. Fpsb E Asihppfeznveg This unit is complete checked by us.

Condition: excellent (used), Moretto server + 4 filters (2014) Fpeb E Aznjikni Ioveg

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Fpjb E Azev Tmzpjnvjg Year 2006 screw di 30

Condition: excellent (used), Woojin Plaimm TE50 IE 70 injection molding machine Year of production 2020 3 machines available Screw diameter fi 22 mm Injection pressure 2184 bar Injection volume 34 cm3 Fpeb E Aev T Aghsznveg Spacing between columns 360 X 360 weight 3,600 kg dimensions 4.0x1.3x1.6 m

Year of construction: 1996, Condition: ready for operation (used), Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible. Fjbsv T Ap Ne E Aznvepg

Condition: excellent (used), Year of construction: 2017, Clamping force: 100 t / increased to 125 ton Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Hydraulic Feb Esv I Ukhe Aznvopg Machine is electric immediately available

Condition: reconditioned (used), Year of construction: 2000, Functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Fsb E Azorxtpdsnvjpg Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Year of construction: 2005, Condition: ready for operation (used), Injection Unit Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Fjb Eev Ir Azo Aznvjpg Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection This Netstal S 6000-5500E hydraulic injection moulding machine was manufactured in 2005. It features a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: reconditioned (used), Year of construction: 2004, clamping force: 129 kN, ejector stroke: 30 mm, total length: 27,400 mm, total width: 810 mm, total height: 1,600 mm, overall weight: 920 kg, pump power: 5,500 W, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. Fsbjtpw I Uo E Aznvspg The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Fpob E Aznev Tb U Dovjg Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Year of construction: 2013, Condition: ready for operation (used), An Arburg injection molding machine including a handling interface is available. Clamping force: 800kN, min. mold installation height: 250mm, max. mold installation height: 550mm, distance between tie bars: 470mm/470mm, clamping platen diameter: 125mm, ejector stroke: 125mm, injection weight: 132g, screw diameter: 35mm, injection pressure: 2000bar, core pulls: 1, total power requirement: 45.5kW, weight: approx. 4600kg. Documentation available. On-site inspection is possible. Fob Eov Tny Tj Aznvspg

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Feb E Aznevl Skgjvspg Injection pressure: 2500 bar Working hours: 38.035 h

Condition: refurbished (used), Year of construction: 2009, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: 121069, input voltage: 400 V, overall weight: 550 kg, B SYSTEM 60 Machine Features: - Total flow rate (min./max. ratio): 12.4 – 68.1 kilos/minute (*) - Isocyanate flow rate (min./max.): 110 to 605 g/s (*) - Polyol flow rate (min./max.): 97 to 530 g/s (*) - Heat exchanger: 0.7 m² - Total power input: 11.5 kW - Air consumption: 130 nl/pour Storage unit: - Two insulated single-jacket steel tanks, 90 liters capacity - Sight glass - Two low-pressure switches - Manual drain valve - Polyol tank agitator - Automatic tank filling (pumps not included) Component temperature control: - Heating element - PT 100 probe detecting the temperature of the Materials - Connections to the cooling water system (not supplied) Mixing head: - Mechanical mixer powered by a three-phase asynchronous motor. - Pneumatic opening and closing cylinder - Conical injectors for component pressure adjustment - Component recycling through the mixing head - Push-button box with emergency stop button, program selector, and pouring control button - Standard cleaning system - Manual safety rinse - Final blast Machine completely overhauled in 2022 by Cannon: invoices available Feb E Aznjv S Hntevspg

Year of construction: 2004, operating hours: 64,285 h, Condition: ready for operation (used), Injection Unit Fjb E Aev Ir Auoznvjpg Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection: Yes This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: good (used), Year of construction: 2003, Functionality: fully functional, screw diameter: 52 mm, type of input current: AC, input frequency: 50 Hz, Equipment: documentation/manual, NEGRI BOSSI 2700H-1450 injection molding machine from 2003 - Core control - Air blower Fsb Esv S Afhe Aznvjpg - Robot interface

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 185724, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3087- Offered here is a used injection molding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Fpsb Ejv Tb Tte Aznvjg Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2012 Machine number: 185724 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Year of construction: 2016, Condition: ready for operation (used), An Arburg injection molding machine including handling is available. Clamping force: 4000kN, opening stroke: 700mm, min. mold installation height: 350mm, distance between tie bars: 820mm/820mm, clamping platen diameter: 160mm, ejector stroke: 250mm, injection weight: 1078g, screw diameter: 70mm, injection pressure: 2000bar, core pulls: 2, total power requirement: 124kW. Documentation available. On-site inspection is possible. Feb E Azov Tny Henvepg

Condition: excellent (used), Year of construction: 2006, Arburg 270 U 350-100U (2006) Universal machine / possible to use in horizontal, vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Febsvdu Dgs E Aznvopg Screw diameter: 25 mm Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 1+2 Heating zones: 3 Low hours: 54.000

Year of construction: 2008, Condition: ready for operation (used), Two similar Battenfeld injection molding machines are available, each with a core pull. 1) Battenfeld HM 1000/750, year of manufacture: 2004, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, hole spacing extension: by 300mm, min. mold installation height: 250mm, tie bar spacing: 520mm/470mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating capacity: 14kW, injection weight: 400g, screw diameter: 45mm, injection pressure: 2100bar, total output: 36kW, machine weight: approx. 4600kg. Handling included. 2) Battenfeld HM 1000/750, year of manufacture: 2008, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, min. mold installation height: 250mm, tie bar distance: 470mm/420mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating power: 14kW, injection weight: 500g, screw diameter: 50mm, injection pressure: 1714bar, total power: 36kW, machine weight: approx. 4600kg. Documentation available. On-site inspection is possible. Fpobjv Tnzde E Aznvog

Condition: excellent (used), Year of construction: 2017, Engel DUO11050/1300 PRO (2017) Clamping force: 1300 ton Min/Max Mould: 700-1400mm Platen size HxV: 2200x1990mm Tie bar distance: 1530x1275mm Feb Eev Inzge Aznvspg Screw dia: 120mm Injection volume: 6447 cm3

Condition: like new (used), Year of construction: 2019, Clamping force: 50 t Min/Max mould height: 150-550mm Platen size HxV: 500x450mm Screw diameter: 30 mm Maximum injection capacity: 99cm3 Robot Engel ER-USP 5 Conveyor belt Fpsb Eevcxuaj Aznveg Material used: POM, PA low hours, very nice condition

Year of construction: 2023, Condition: like new (used), SEPRO Success 22X (2023) X = 2000mm Z = 1400 mm Y = 700mm Fsb E Aov Ift Hjznvjpg C axe : YES Payload : 10kg Vacuum circuid: 2x Pressure circuid: 2x