Complete clamping for KM 350

KraussMaffei KM 350

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: open: 105 kN close: 95 kN Mounting platen (h x v): 1,060 x 1,095 mm Clear space (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Max. daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 ltr. Dimensions and weights: Net weight incl. control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Ijdpfx Afjxu Uvasfjtr Injection unit: Performance rating: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed standard / option: rpm 285/349 Screw speed standard or level 1: 95 PS Screw speed option or level 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5-inch floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Itsdpfx Ajtrbcbsffjr Robot system core pulls hot runner controller -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) *

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in disk drive 2. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Moving platen force: Opening: 105 kN Closing: 95 kN Platen dimensions (h × v): 1060 × 1095 mm Tie bar clearance (h × v): 710 × 710 mm Mold opening stroke: 920 mm Mold height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 cm³ Itjdpex Elukofx Affjr Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Standard throughput: 108 g/s Increased throughput: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Itsdpfx Ajxx Uf Aeffer

Year of construction: 1996, operating hours: 24,222 h, condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 80M - Year of construction: 1996 Itjdspwh Akspfx Affor - Screw diameter: 42mm - Shot volume: 200 cm³ - Clamping force: 80T - Working hours: 24,222

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Injection unit Auger diameter: 80 mm Ls/D ratio: 20 Itsdpfemki Iuex Affsr Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Itedohq Uigopfx Affsr Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz

Year of construction: 2021, condition: like new (used), For sale is an as good as new orbital welding machine from the company ORBITAL Weldingtools with many accessories.Year of manufacture 2021. Itodpfxehp U S Ss Affsr

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Ijdpfx Afohcnxrjfotr Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Iodpfxjhcfzko Affstr Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500