Condition: good (used), 1x used Krauss Maffei KM 125-700 C2 Ma-No. 61005758 Year of manufacture: 2004 Screw: 45mm Core pulls: 3x Hot runner: 8x Duoliswcbdpomw Ucjt Operating hours: approx. 73,000

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Dusliov U Dn Nemw Ucst Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: excellent (used), Year of construction: 2008, Wittmann-Battenfeld HC 400/2250 S Year of construction 2008 Unilog B6 control system Operating hours: approx. / (pump) Screw diameter 65 mm Fuel weight: approx. 980gr/hp Distance between tie bars 900 x 710mm Extras: Core pull Handling interface Battery incl. Battenfeld Handling R10 Machine weight: 20.000kg Duslimewb U S Row Ucet Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Model: KM 800/6100 MC Year of Manufacture: 2001 Clamping Force: 800 tons Control System: MC4 Machine Description: White-yellow, hydraulic locking mechanism Installed Power: 254 kW Mold Opening Stroke: Max. 2000 mm Mold Height: Min. 600 mm Distance Between Tie Bars: 1120 mm (horizontal) x 1000 mm (vertical) Platen Size: 1600 mm x 1510 mm Screw Diameter: 105 mm, Type HPS-M Injection Pressure: Max. 1469 bar, with a maximum shot weight of 3743 g (PS) Robot Interface: Equipped with a Wittmann robot Duolijrw A Ukemw Ucst Core Pulls: Freely programmable, 2 Hot Runner Control: 8 zones Cooling System: Stäubli cooling battery connection Screw Drive Unit: Hydraulic Gravimetric Mixer This machine has been well maintained and is ready for immediate use. The machine is sold as seen, with no warranty. Prospective buyers are encouraged to inspect the machine in person.

Year of construction: 2003, Condition: good (used), For sale we have an injection molding machine of the company Arburg and the type 420 C 1000 150/60 The machine has been serviced regularly and on time Designation: 420 C 1000- 150/60 Machine number: 191198 Year of manufacture: 2003 Machine number: 110846 Operating hours: 51629 pump hours Spraying cylinder Ø 25 mm Horizontal Ø 15mm Vertical Weight: 2550 kg Length: 4,5m Equipment: 2 core pulls , cavity pressure ,accumulator ,Q-switch ,hot runner controller internal , conveyor belt, rotary plate Not in the offer are granulate conveying systems, temperature control units or external hot runner controllers Prices plus value added tax Visits are possible by appointment. Please contact us, our team will be pleased to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dslimwsi E Ttqs Ucout For more information or to contact us, please visit our website

Condition: like new (used), Year of construction: 2018, operating hours: 17,000 h, Functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, Cleanroom machine only used PP 300 tons, screw diameter 70 mm Barrier screw with homogenizer and mixing head Only 1,700 operating hours Only used PP Djlimwewb Dyws Ucout

Condition: good (used), Year of construction: 2001, 1x Arburg 520C 1600-675 Dolimswcbcxew Ucsut Year of construction: 2001 Ma-No.184059 Screw: 35mm Blow out: 1x Handling interface Temperature control unit interface Printer interface + Multilift H + protective housing The machine comes from current production and is available immediately! Delivery possible at cost, please contact us!

Condition: good (used), Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Dslimw Ueu Rq Aioceut Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

Condition: excellent (used), Year of construction: 2001, KraussMaffei KM 200-1400 CX Year of construction 2001 Control MC4 Operating hours: approx. 16,700h (pump) Delimw Uowb U S Decout Screw diameter 70 mm Fuel weight: approx. 841gr./hp Spar distance 560 x 560mm Machine weight: 10500kg Extras: Core pulls Handling interface Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, clamping force: 2,000 kN, overall weight: 8,200 kg, Equipment: documentation/manual, This fully electric injection molding machine will be showcased as an exhibition model at K 2025 in Düsseldorf from October 8 to 15, 2025, and will be available for purchase afterward. We look forward to your inquiry and are confident that our offer will fully meet your expectations. If you are interested in other machine sizes or configurations, please feel free to reach out to us. We are certain we can provide you with an optimal and cost-effective solution. Duolimw Uewbtkrecst Powerjet was founded in 1999 and is headquartered in Guangdong, China. The company exports 65% of its manufactured machines to 45 countries worldwide, ensuring full customer satisfaction through excellent service and aftersales support. _____ This fully electric injection molding machine will be presented as an exhibition model at K 2025 in Düsseldorf from October 8 to 15, 2025, and will be available for purchase afterward. We look forward to your inquiry and are confident that our offer will fully meet your expectations. If you are interested in other machine sizes or configurations, please do not hesitate to contact us. We are confident that we can offer you an optimal and cost-effective solution. Powerjet was founded in 1999 and is headquartered in Guangdong, China. The company already exports 65% of its machines to 45 countries worldwide and always ensures complete customer satisfaction through excellent service and after-sales support.

Condition: used, Year of construction: 1990, Functionality: fully functional, machine/vehicle number: 64415, clamping force: 3,300 kN, clearance between the columns: 625 mm, pressure: 2,015 bar, Injection molding machine Stork ST 1600 - 330 Duolsvpfbteimw Ucst

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Fully equipped from the clean room Djlimjwb Dl Tow Ucout Only PP used. Screw like new.

Condition: good (used), Year of construction: 2006, 1x used KraussMaffei KM160-750 CX with robot, safety fence, and conveyor belt Year of manufacture: 2006 Duolimwjwcbcle Ucst Ma-No. 61008160 Screw: 50mm Core pulls: 2x Immediately available!

Condition: excellent (used), Year of construction: 2009, SUMITOMO SE350HD-C1600 (2009) Clamping force: 350 t Screw diameter: 63 mm Shot weight: 853 g Distance between tie bars V: 710 mm Distance between tie bars H: 760 mm Plate dimensions: 1070x1020 mm Shot volume: 888 cm3 Type: Horizontal Drive: Electric Only 40.000 hours Duelevygmleimw Ucot 2 core pullers

Condition: excellent (used), Year of construction: 2006, Arburg 370U 700-290 Dolswb U Swsimw Uceut Year of construction 02/2006 Control Selogica Operating hours: approx. 82,500h (pump) Screw diameter 35 mm Fuel weight: approx. 132gr/hp Spar spacing 370 x 370mm Extras: Core pull Handling interface Machine weight: 3500kg Machine is free! Subject to alterations, prior sale and errors excepted!

Year of construction: 1991, Condition: ready for operation (used), Clamping force: 12,000kN, opening force: opening stroke: closing speed: 1030mm/s, max. mold weight: 22.5t, max. platen dimensions: 1900x1950mm, tie bar diameter: 220mm, ejection force: 130kN, screw diameter: 133mm, injection pressure: 1445bar, width: 3500mm, length: 14,745mm, height: 2740mm. With documentation. On-site inspection is possible. Duoljwbpzaoimw Ucet

Condition: ready for operation (used), Year of construction: 2005, operating hours: 49,412 h, Functionality: fully functional, machine/vehicle number: 90962, clamping force: 8,000 kN, screw diameter: 100 mm, clearance between the columns: 1,120 mm, displacement volume: 5,700 cm³, plate width: 1,620 mm, plate height: 1,530 mm, Equipment: documentation/manual, including protective fence and conveyor belt Dslimwswbpq Ij Ucjut

Condition: ready for operation (used), Year of construction: 2017, operating hours: 212 h, General Data Machine weight 21500 kg Injection Unit Dujlimov T D Ndew Ucot Screw diameter 70 mm Shot weight 1172 g Injection pressure 1856 bar Clamping Unit Clamping force 350 T Size of mold platens 249 – 800 mm This Milacron Elektron Evo 350 was manufactured in 2017. A reliable electrical injection moulding machine, it offers efficient performance for your production needs. Consider the opportunity to buy this Milacron Elektron Evo 350 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2015, Condition: excellent (used), Windsor Plug X Press Technologies Year :2015 Serial nr.: 019 Oil tank capacity: 400L Dolimwouzhchs Ucout the part no of the screw is 03424130. Ø = 55 mm, total length = 1610 mm SS PxP-881 D55 20D 4,5D a

Condition: excellent (used), Year of construction: 2012, operating hours: 66,265 h, BATTENFELD EcoPower 110/350 (year of construction 2012) (110t) Electric, high speed, energy-saving. Control system: UNILOG B6 - touchscreen Operating hours: 66,265 Screw diameter: 35 mm Shot weight: 153 gr/hp Injection pressure: 2083 bar Shot volume: 168 ccm Closing force: 110 t Distance between tie bars: 470×420 mm Max. Size of mold platens: 690×663 mm Ejector: hydraulic Toggle lever Robot interface Europe 67 Air valve x 1 Hydraulic core puller x 1 Hardened injection unit - bimetal Parallel movements Centralized lubrication Heating capacity: 10.4 kW Dimensions: Length / width / height: 4.50×1.50×2.10 m Duslimw Uswb U Sqecet Weight: 4800 kg Machine is free! Subject to alterations, prior sale and errors excepted!

Year of construction: 2019, Condition: ready for operation (used), General Data Machine weight 7100 kg Control Unit Brand ENGEL Additional Equipment Clamping unit with standard Euromap platens and safety components Dujliov T D S Eomw Ucjt Hydraulic system with energy efficiency and low noise Microcomputer CC300 package with 215-inch full-HD color touch-screen Mold cooling with water terminal and flow control Machine mounts in standard execution This Engel VICTORY 500 /120 SPEX was manufactured in 2019. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, operating hours: 50,000 h, Demag Ergotech-Concept 1000/500-600 Year of construction 2007 NC4 control system Operating hours: approx. 50,000h (pump) Screw diameter 50 mm Fuel weight: approx. 359gr/hp Spar distance 500 x 500mm Machine weight: 5700kg Extras: 1x core pull & handling interface Machine is free! Duelimwewb U Skj Ucet Subject to alterations, prior sale and errors excepted!

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 22200 kg Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Djlimwsv T D Nwo Uceut Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2008, Arburg 320C 500-170 Year of construction 05/2008 Control Selogica Operating hours: approx. 60,000h (pump) Screw diameter 35 mm Fuel weight: approx. 105gr/hp Distance between spars 320 x 320mm Duslimwjwb U Sde Ucjt Extras: Core pull Paint dispenser interface Handling interface Machine weight: 2200kg incl. removal device from the company. Star Year of construction 11/2007

Condition: like new (used), Year of construction: 2006, Arburg 470C 1500-800 Year of construction 09/2006 Duelewb U R Tjimw Ucst Control Selogica Operating hours: approx. 68,000h (pump) Screw diameter 70 mm Fuel weight: approx. /gr./hp Distance between tie bars 470 x 470mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 5500kg incl. Arburg Multilift Year of construction 2006 X-200mm Z-800mm