Injection Moulding Machine

Stork ST 13000-1200

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Lsdpfx Adeu Ti Sro Nerg Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Ljdpfx Ajw Ebpwed Nerg Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: used, Year of construction: 2015, Technical details: Lrjdpfx Asw I E R Nod Nog closing pressure: 6600 kN weight of the machine ca.: 45,5 t

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Rotor width: 650 mm 3-knife rotor 2 rows of stator knives Lrodpfxekyzavj Ad Nsg inlet cross section approx. 450 x 650 mm drive motor: 37 kW

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Servo-hydraulic injection moulding machine Clamping force: 9,000 kN (900 tons) 🔹 General Information: Ljdpfjwzy N Ujx Ad Norg Year of manufacture: 2017 Control system: UNILOG B8 Installed power: 53.9 kW Operating hours: only 999 Dry cycle time: 4.0 – 770 sec/mm Machine dimensions (L x W x H): 10,100 × 3,400 × 2,700 mm Machine weight: 35,200 kg 🔹 Injection Unit: Screw diameter: 105 mm Injection volume: 4,545 cm³ Screw rotation speed: 159 rpm Screw L/D ratio: 22 Nozzle stroke / max force: 129 mm / 950 kN Max nozzle travel: 525 mm Number of heating zones: 7 🔹 Clamping Unit: Clamping force: 9,000 kN Max mould opening stroke: 1,800 mm Min / max mould height: 600 mm / 1,200 mm Max daylight (between platens): 2,400 mm Tie bar spacing (H × V): 1,450 × 1,100 mm Ejector stroke / force: 300 mm / 165 kN Mould opening force: 300 kN Core pulls: 2

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Lrsdjxcakrepfx Ad Nog Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm Lrodpfx Aowqd Tcsd Nog

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Ljdpfxoxghy Nj Ad Norg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 254387, clamping force: 3,000 kN, screw diameter: 70 mm, clearance between the columns: 630 mm, displacement volume: 1,047 cm³, injection pressure: 1,778 bar, injection weight: 953 g, ejector stroke: 200 mm, opening stroke: 1,150 mm, plate width: 1,050 mm, plate height: 995 mm, installation height: 330 mm, total length: 6,210 mm, total width: 2,040 mm, total height: 2,380 mm, overall weight: 12,500 kg, number of injections: 1, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Lsdpexr Dfrjfx Ad Njrg

Condition: new, Year of construction: 2016, operating hours: 9 h, functionality: fully functional, BMCtouch Integrated Automation System The control system, constructed in modular design, includes the following components: - PLC in industrial-standard design for machine control - Industrial PC for visualization and data management - Swivel-type operating and display panel with 19" TFT touch screen Performance Features: - User interface and functionality as per previous BMCtouch systems - Temperature control with self-tuning function - Pre-heating and start-up program - Prepared for data transfer to haul-offs with BMCsmart control systems - Operation of haul-off and saw from extruder terminal Ledpox Sbc Rsfx Ad Nerg - CANopen Interface DS420 V2.0 - Flexible process display with individually configurable summary pages and customizable background - Configurable alarm management and alarm history - Trend data acquisition and presentation - Order management/administration - Configurable access authorization - Online assistance - Suitable for independent multi-user operation - Additional memory for history trends - Network capability - Modem Integration of Central Air Supply Co-extruder, BCE 1-30-25D - Stand-alone machine - Synchronization with main extruder via CANopen, DSP 420 V2.0 - AC drive incl. gearbox - Nitrided screws - BMCeco operator terminal - Product of battenfeld-cincinnati China branch Extruder, solEX 75-40 i Designed for pipe extrusion Technical Data: - Screw diameter: 75 mm - Effective screw length: 40xD - Drive power: 300 kW - Barrel heating zones: 5 pcs. - Barrel cooling zones: 5 pcs. - Total installed power, max.: 347.37 kVA Die heating zone incl. thermocouple (6 kW, 230 V) (BMCtouch control) Extrusion Die, helix 500 VSI-TZ Designed for the extrusion of PO pipes - Two-step distributor consisting of smoothing thread and compact lattice basket - Base die and die set made of tempered steel - Material flow surfaces are polished - Pipe O.D.: 90 - 500 mm - Number of heating zones: 17 Co-extrusion ring for 4 color stripes Calibrating sleeve, type 6 For PO pipes vacStream 500-6 No. 1 Designed for calibrating and cooling of pipes - Closed stainless steel tank with welded feet - Tank on rollers with height and lateral adjustment - Rust-proof hinged lids - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Mechanical vacuum control - Temperature display Technical Data: - Pipe diameter range: 90 - 500 mm - Number of solid taper nozzles: 162 pcs. - Number of spray rods: 6 pcs. - Max. vacuum: 0.7 bar - Length of vacuum chamber: 5500 mm - Total length: 5900 mm vacStream 500-6 No. 2 Designed for calibrating and cooling of pipes coolStream 500-6 4 For pipe cooling - Closed stainless steel tank - Base frame with height-adjustable feet - Rust-proof, hinged lid - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Temperature display - Spray rods made of PVC - Solid taper nozzles with bayonet lock - Visual monitoring of pumps - Drip trays at inlet and outlet - Water circulation pump pullStream R_ 500-6 E Designed for pipe haul-off cutStream RTAplus 500 For chipless cutting of PO pipes