Condition: good (used), Year of construction: 2008, Ref. no.: 171 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 6K Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening width: 1008 mm Platen size (h x v): 1300 x 1460 mm Injection unit Screw diameter: 50 mm Injection volume: 422 cm³ Debu Utswgpwxjtieut Shot weight: 0 g Injection pressure: 2322 + 00 + + + + bar Measurements and weight Machine weight: 22000 + 6600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Dusbu Utowgni Hotiet Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: used, Year of construction: 2004, operating hours: 63,107 h, Functionality: fully functional, machine/vehicle number: 61004849, clamping force: 125 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 142 g, mold height (min.): 300 mm, overall weight: 6,000 kg, Equipment: documentation/manual, We are offering our Krauss Maffei KM125-390 C2 for sale. The machine has been replaced. Until the replacement, it was in continuous operation in our production facility. If you are interested in arranging a viewing, please contact us. We may require some lead time to reconnect the machine to the power supply. If you would like a viewing without the power supply, we are happy to arrange a short appointment. Dobu Uev Rbpvsttisut If you are interested, we can also send you a short video of the machine in operation.

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 28460, clamping force: 3,500 kN, screw diameter: 55 mm, clearance between the columns: 950 mm, overall weight: 5,000 kg, pump power: 45,000 W, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, ENGEL ES1350/350 HL Injection Molding Machine with Robot – Year 1995 Specifications: - Manufacturer: ENGEL - Model: ES1350/350 HL - Year: 1995 - Clamping force: 3500 kN (350 t) - Control unit: Core pull on moving platen - Robot included: ENGEL ERC 53/2-CL (1995) Condition: Machine is fully operational and currently running in a continuous production cycle. Included: - Take-out robot - Full documentation - Electrical and hydraulic diagrams Location: Poland Dujbuewglwbe Uttijt

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Debu Utsv R Ia Iotisut Interface for brush control Interface for handling device (EUROMAP 67)

Condition: excellent (used), Year of construction: 2000, Demag Ergotech 350-115 viva Closing 35 tons Year of manufacture 2000 Scrow 25mm Dujbu Utswgdhlotiet Pls sprue picker

Condition: good (used), Year of construction: 2008, Ref. no.: 17147 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 5K Year of construction: 2008 Djbuswgpwrs Uttieut Clamping unit Clamping force: 400 ton Opening stroke: 1008 mm Platen size (h x v): 1360 x 1460 mm Injection unit Screw diameter: 60 mm Injection volume: 608 cm³ Shot weight: 7 g Injection pressure: 17 + + + + bar Measurements and weight Machine weight: 22.000 + 6.600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: used, Year of construction: 2008, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystem Dsbu Uttewgc R Seieut

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 800kN, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 580mm/590mm, opening stroke: 450mm, min. mold installation height: 250mm, max. mold weight: 650kg, ejector stroke: 125mm, ejector force: 45kN. Screw diameter: 35mm, shot weight: 168g, dosing volume: 185cm³, injection pressure: 1800bar, plasticizing capacity: 15g/s. Control system: NC5, robot interface: Euromap 67, machine weight: approx. 4100kg, machine dimensions X/Y/Z: 4100mm/1400mm/1900mm, operating hours: approx. 73500h. Documentation available. On-site inspection is possible. Dujbu Utewgczkotiet

Condition: good (used), Year of construction: 2004, 570 C 2200 - 675 Thermoplastic cylinder cpl. 55 mm highly wear-resistant Technology level 2 servo-controlled with 2 control pumps Thermoplastic processing Open nozzle 55 mm Nozzle tip radius 35 Heating tape for open nozzle Heating tape for extended nozzle tip Nozzle tip Clamping plate set 570 central Ø 125 mm Connection for blow-out device 1 Selector unit incl. connection Core pull 1, simultaneous movement Holding pressure manually adjustable Power-operated safety slide Robot system interface (to EUROMAP 12), 32-pin ARBURG master computer interface Power socket vert. 1 CEE, 1 additional Schuko Cutting unit Temperature control unit WKZ 20 mA Interface printer serial V24 Parallel connection for heating tape nozzle tip Interface coloring device Low-current switch cabinet 400 x 800 Heavy current switch cabinet 800 x 800 4 free cooling circuits manually adjustable Machine-related cooling circuits controlled Extended monitoring equipment package Equipment package extended movements Production control equipment package Optimization / operating aids equipment package Quality assurance equipment package Duebujwgb E Ie Uttist Documentation equipment package Without granulate container 50 L Injection control TFT color monitor Oscillating elements Selogica control (sequence editor) Connection ejector plate safety device Ejector quick-release coupling Water-cooled switch cabinet Power socket vert. 1 CEE, 1 Schuko Hydraulic ejector Larger holding pressure pump for simultaneous movements of the secondary axes, e.g. core pull functions during mold opening Cycle start when closing protective hood

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 65-180 CX injection molding machine Year of manufacture: 2005 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in diskette drive. Dujbjwgam Deu Uttiet Plasticizing system Screw diameter: 30 mm Nozzle radius: 12 mm Nozzle opening diameter: 4 mm TECHNICAL DATA (standard version) Closing unit Mould closing force: 650 kN Mould opening force: 55 kN Clamping plate dimensions (W x H): 670 x 670 mm Clearance between columns (W x H): 420 x 420 mm Mould opening stroke: 500 mm Min. mould height: 250 mm Maximum opening width: 750 mm Ejector stroke: 150 mm Ejector force (forwards / backwards): 23 / 10 kN Injection unit Screw diameter: 30 mm Length to diameter (L/D): 23.3 Injection pressure: 2025 bar Injection volume: 38.5 cm³ Injection weight (for PS): 77 g Injection efficiency: 106 cm³/s Screw speed (standard): 477 rpm Plasticization efficiency: 16 g/s Electric-hydraulic equipment Pump motor power: 15 kW Installed heater power: 8 kW Number of cylinder heating zones: 5 Dry cycle time (Euromap 6): 1.6 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Net weight (with control cabinet): 3.5 t Machine dimensions (L x W x H): x W x H): 3.98 x 1.48 x 2.02 m

Condition: excellent (used), Year of construction: 1993, Demag Ergotech 200-50 Compact Closing 50 tons Scrow 30mm Dsbu Uowgdd Tettieut Hole spacing 35.5x35.5

Condition: good (used), Year of construction: 2004, Ref. no.: 17146 Hersteller: ENGEL Type: ES 750H/80W/(500V)/300HL-2F Year of construction: 2004 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Injection unit Screw diameter: 50 + 25 mm Injection volume: 393 + 49 cm³ Shot weight: 354 + 44 g Injection pressure: 1917 + 1586 bar Debu Uttjwgpwloiout Measurements and weight Dimensions: 6,5 x 2,3 x m Machine weight: 21000 kg

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 620 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystems Dujbuowgcx As Uttijt

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 1600kN, opening stroke: 500mm, mold installation height min./max.: 275mm/585mm, max. platen distance: 1085mm, platen dimensions X/Y: 770mm/770mm, tie bar dimensions X/Y: 520mm/520mm, ejector stroke: 160mm. Screw diameter: 40mm, screw stroke: 203mm, injection weight: 160g. Documentation available. On-site inspection is possible. Duobswgczwju Uttiot

Condition: excellent (used), Year of construction: 2017, 1x used Arburg 1500T 1600-170 Ma-No. 241988 Year of manufacture: 08/2017 Complete thermoplastic cylinder, 30 mm, highly wear-resistant Standard screw coupling, two-edge coupling geometry Selogica direct control system Technology level 2, servo-driven with 2 control pumps Special model rotary table, ergonomic design Thermoplastic processing 2-station rotary table, 180° forward/backward alternating Open nozzle, 30 mm Nozzle tip radius 35 mm Heating band for open nozzle Central clamping platen set, Ø 125 mm Blow-out device 1 with pressure reducer at station 1 Connection for blow-out device 2 at station 2 Connection for tool position monitoring on the movable mold platen Connection for tool position monitoring on the rotary table Core pull 3, simultaneous travel movement P/Q controlled, programmable Core pull 4, simultaneous travel movement P/Q controlled, programmable Core pull 1+2, on the rotary table P/Q controlled, programmable Light curtain at 180° Continuous oil cooling and filtration Connection for oil bypass filtration Extension pipe for granulate container Injection compression molding and venting with clamping unit Interface to host computer OPC-UA 8 programmable inputs/outputs Socket combination 1CEE, 1 Schuko, protected by a 30mA Type B residual current device Socket combination 3CEE, 3 Schuko, protected by a 30mA Type B residual current device Interface WKZ 20 mA temperature control unit HB-THERM temperature control unit connection cable Printer serial USB interface CompactFlash interface for data storage Operator authorization with chip card according to EUROMAP 65 9 electrical heating control circuits for tool heating Inking device interface Lighting in the loading area 7 free cooling circuits, manually adjustable 2 cooling circuits on a moving plate for water, max. 60°C 2 cooling circuits on a turntable for water, max. 60°C 2 temperature control circuits on a moving plate for water, max. 140°C 4 temperature control circuits on a Water rotary table, max. 140°C Machine-specific cooling circuits controlled Extended monitoring package Extended travel motion package Production control package Optimization/operating aids package Quality assurance package Documentation package Dobujwgb Ezo Uttijut Axis monitoring package aXw Control ScrewPilot for 1st injection unit 8-way rotary union, top-mounted Corrosion protection treatment for rotary table Circumferential sealing lip on the outside

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, clamping force: 3,800 kN, screw diameter: 60 mm, clearance between the columns: 740 mm, displacement volume: 910 cm³, mold height (min.): 250 mm, ejector stroke: 200 mm, Servo driven machine. Debu Utjwf Urfstisut Hopper drier, hopper loader and 3 axis robot included in the price. Price can drop if the machine is purchased without them. Still in production and available for inspection. Price loaded on truck.

Condition: excellent (used), Year of construction: 1991, Arburg 270M-500-210 Closing 50 tons Dusbowgc Epeu Uttijt Scrow 40 mm Injection softened 188 cm3

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Dusbu Utowgpwfotist

Condition: used, Year of construction: 2008, operating hours: 75,000 h, Functionality: fully functional, clamping force: 2,800 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 368 cm³, injection pressure: 2,402 bar, injection weight: 320 g, opening stroke: 675 mm, plate width: 950 mm, plate height: 950 mm, installation height: 710 mm, total length: 6,620 mm, total width: 1,920 mm, total height: 2,250 mm, overall weight: 13,000 kg, Core pull 2-fold, 6-fold cascade, with robot Dujbewgcmgju Uttist

Year of construction: 2000, Condition: ready for operation (used), Clamping force: 500kN, platen dimensions X/Y: 540mm/540mm, tie bar spacing: 355mm/355mm, opening stroke: 400mm, min. mold installation height: 210mm, clearance: 610mm, ejector stroke: 125mm. Screw diameter: 30mm, L-D ratio: 20, stroke volume: 144.3cm³, injection weight: 128g, injection pressure: 1890bar. Machine dimensions X/Y/Z: approx. 3650mm/1150mm/1800mm, weight: approx. 2500kg, control: NC4, operating hours: approx. 41100h. Documentation available. On-site inspection is possible. Dobu Uttewgczdoieut

Condition: good (used), Year of construction: 2010, 1x used Krauss Maffei KM 300-2000-380-CX with robot, safety fence, conveyor belt, and turntable! Year of manufacture: 2010 Machinery No. 61014333 Horizontal screw: 70 mm Vertical screw: 30 mm Core pulls: 4x Hot runner control stations: 16 zones The machine is available immediately! Dsbu Uttswgb Enoieut

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Djbowgc Drju Uttisut Closing 35 tons Year of manufacture 2002 Scrow 25mm Injection soaked 49 cm3

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 500kN, tie bar distance X/Y: 370mm/370mm, platen dimensions X/Y: 540mm/530mm, opening stroke: 400mm, min. mold height: 135mm, clearance: 535mm, ejector stroke: 125mm. Screw diameter: 30mm, injection volume: missing (please add), injection pressure: 1890bar, core pulls: 2. Machine dimensions X/Y/Z: approx. 3600mm/1200mm/1800mm, weight: approx. 2500kg, operating hours: 80300h. Documentation available. On-site inspection is possible. Dobu Utswgczqetijut

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Dobuswgb Ebo Uttijut Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Printer interface Interface for inking unit Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools!