Used hydraulic single column presses 26-50t for sale (38)

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected Iaedpfx Ahsupbdgj Nol -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: used, Year of construction: 1985, Nominal pressing force: 40 t Ram stroke: 500 mm Clamping height: 710 mm Table size: 630 mm Ram outreach from frame: 320 mm Ram speed: - idle 125 mm/s, - pressing 16 mm/s, return 315 mm/s Iaedpsxm R Ivjfx Ah Nel Machine is connected to power and operational

Year of construction: 2001, condition: good (used), Offer 20202 Ijdpsp Dt Tasfx Ah Noal Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,085 mm, total width: 1,290 mm, total length: 1,160 mm, pressing force: 50 t, table width: 700 mm, table length: 450 mm, overall weight: 1,750 kg, working height: 850 mm, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700×450 mm Upper table 550×300 mm Maximum vertical light 400 mm Working height 850 mm Iodpjwphvrefx Ah Neal Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Iodpfx Ahsdzp Trs Noal Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 250 mm, pressing force: 40 t, table width: 500 mm, table length: 600 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 40 PRESSURE (TONE) 40 Iaodpfx Ahsvzkr Uo Nol STROKE (MM) 500 THROAT DEPTH (MM) 250 TABLE – RAM DISTANCE (MM) 600 TABLE DIMENSION (MM) 500X600 PRESS DEPTH (MM) 1050 PRESS WIDTH (MM) 500 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2400 MAIN CYLINDER DIAMETER (MM) 245 ENGINE POWER (KW) 5.5 WEIGHT (KG) 4500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm Iaedpfob A Tcfox Ah Nel -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, distance between stands: 800 mm, stroke length: 500 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Iajdpfjwbt Uqox Ah Njl Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 906 h, functionality: fully functional, installation height: 500 mm, throat depth: 250 mm, pressing force: 30 t, stroke length: 400 mm, controller manufacturer: Siemens, Press with only approximately 1000 operating hours! TECHNICAL DETAILS Press data Pressure: 30 t Throat depth: 250 mm Stroke: 400 mm Installation height min.: 100 mm Installation height max.: 500 mm Control: Siemens SIMATIC HMI MACHINE DETAILS Total rated power: 13 kW Dimensions & Weight Machine weight: approx. 3 t Required space: approx. 2.5 m x 1.70 m x 2.85 m Iedpfxow Dax Uo Ah Noal Operating hours Total hours: 2637 h Working hours: 1000 h

Condition: good (used), Year of construction: 1976, Serial No.: 14 069, pressing force 40 t, used as a straightening press, with roller supports, roller width 300 mm, table width 2,800 mm Iajdpfx Ajwyw R Tsh Nol

Year of construction: 1992, condition: good (used), H Bret press Ijdpsiuc Nwjfx Ah Noal Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Turn over to pressbrake possible!

Condition: excellent (used), Year of construction: 2001, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 1354.18, total height: 20,000 mm, installation height: 500 mm, pressing force: 30 t, table width: 550 mm, table length: 400 mm, operating speed: 60 mm/s, overall weight: 2,500 kg, stroke length: 300 mm, power: 7.5 kW (10.20 HP), Technical data: Pressing force 30 t Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Weight 2.5 t Iaedpfx Ahotrd Ube Njl With - 2-hand release - light barrier - safety cage - Infinitely variable pressure control, preselection with digital display - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV

Condition: used, Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min Iajdpoix Rchofx Ah Njl -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm -Weight: 158 kg