Used hydraulic presses double column / four column presses for sale (199)

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Weight: 14 700 kg Condition: Used, heavy-duty industrial design Technical and operating parameters: Fedpfx Akjzk Amrjvjpk Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Fpodpfxozrz D Se Akvok Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request.

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Fjdjzrptuspfx Akvepk Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Fsdozrpthspfx Akvspk Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm Fedpezrptbofx Akvepk hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m Fjdpfxozrpt Io Akvjpk year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m Fpodpfx Akezrptzevek year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Fpedpfx Akszrptnevek Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1990, pressure 500 t Fpjdpfx Akszrpqtovsk distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s Fpodpfx Akjzrpr Rsvek oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). Fpodpfxjx Ehmyj Akvsk This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Fedoztpnzjpfx Akvspk Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Fodpfxswbtn Re Akvopk Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: excellent (used), Year of construction: 2000, Manufacturer EMANUEL Model DEA 800 Year 2000 Condition Used Warehouse number Cod.0337 Power 800 tons Fodpowiidwjfx Akvjpk Slide stroke 900 mm Approach speed mm/sec 400 mm Working speed at 100% mm/sec 15 mm Working speed at 50% mm/sec 31 Slide return speed mm/sec 400 mm Max. vertical clearance 1,500 mm Mold holder table size 2,500 x 1,500 mm Blankholder table size 2,380 x 970 mm Blankholder cushion - total force (ton) 600 tons Lower blankholder stroke 450 mm.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t Fedpfx Akjx Uru Njvepk dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm Fsdsxcblwspfx Akvopk table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: good (used), Year of construction: 1970, pressure 80 t Fodpsvwgqrefx Akvspk passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V Fpsdpfx Akszq Apgjvsk ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Fpjdpfsxbf Ndsx Akvek Table size: 480 x 350 mm Maximum tool height: 230 mm

Condition: good (used), Manufacturer: MÜLLER Tip: SDZ 63t Table surface: 620x500mm Pressure: 63 t Fpjden D Eiaepfx Akvek

Condition: good (used), Press force: 200 tons Table: 1500x1000 mm Fpodpfegvz Hxsx Akvek Motor: 45 kW Weight: 18,000 kg Frame width: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Condition: used, Pressure: 100 T Length of stroke: 150 mm Fsdpfe Du U Rex Akvepk Down table size: 800 x 650

Condition: used, Pressure: 200t Length of stroke: 200mm Up table size: 800x700mm Fpedpfxj Dvalo Akvsk Down table size: 800x700mm Weight: 7000kgr New electric and hydraulic systems

Condition: used, Pressure: 250 T Length of stroke: 120 mm Down table size: 1600x1600 mm Fpsdpfx Aks Du U Djvek NEW HYDRAULIC AND ELECTRIC SYSTEMS

Year of construction: 1984, condition: refurbished (used), PRESSURE 200t TABLE UP/DOWN 1130x860mm Fpjdpodzp Ezjfx Akvsk STROKE 250mm DAYLIGHT 500mm