Condition: good (used), Year 2003 Ppodpfot Utdpex Aalel Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Pjdpfx Asxyadtoalepl Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: used, WAHLI W 92 is a Hobbing machine offering precision, high accuracy and reliable operation. Work capacity: max diameter 10 mm, max module 0.5, workpiece length max 35 mm, max gear width 15 mm, number of teeth 6-180; distance between workpiece and tool 0-28 mm; gear hob max Ø 24 mm; milling cutter speeds 6 steps from 850 to 4500 t/min. Main specs: 50 Hz 3x 380 V supply, power 0.32 CV; machine weight approx. 350 kg; dimensions L630×W530×H1350 mm. Equipment: PLC control, Loader Wahli W20, parts catcher, deburring device, coolant system, central lubrication. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Ppsdoxx U Ahepfx Aalsl

Condition: like new (used), Year of construction: 2020, operating hours: 18,000 h, functionality: fully functional, As-new Gear Grinding Machine KLINGELNBERG VIPER 500 W All-inclusive machine equipped for internal and external gearing Equipped with a special converter from EUR kW to US standard connection (simplified global connection) Available due to restructuring at a high-tech family-run company (no automotive production) Working Area and Capacities Max. workpiece diameter: 500 mm Max. grinding stroke: 500 mm Working area over table (min.–max.): 300 – 800 mm Distance between spindle center and table (min.–max.): 442 – 1042 mm Module (generating grinding module): 0.5 – 22 Swivel angle (min.–max.): –180° to +45° Grinding System Grinding wheel diameter (min.–max.): 221 – 350 mm Grinding worm diameter (min.–max.): 221 – 350 mm Max. grinding wheel width: 75 mm Max. grinding worm width: 150 mm Grinding spindle power: 37 kW Max. grinding wheel speed: 6000 rpm Table and Feeds Table diameter: 400 mm Table bore Ø × depth: 100 × 500 mm Max. table speed: 1000 rpm Max. axial feed: 20,000 mm/min Max. radial feed: 12,000 mm/min Max. tangential feed: 20,000 mm/min Connections and Dimensions Total connected load: 60 kVA Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm Filter unit dimensions (L × W): 3490 × 2250 mm Net weight approx.: 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, lead, and pitch of external gears Measuring system for profile, lead, and pitch of internal gears V5 Touch Trigger Phasing System Power supply with ESR voltage drop compensation 100 mm table adapter Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil filtration system with band filter 100 Fire extinguishing system Automatic work area door Cleaning system with spray gun Crane/hoist integrated into enclosure Isolation transformer Voltage stabilizer and isolation transformer Signal light/beacon tower Software Packages Gear PRO software Psdpfsxx T N Tsx Aalspl Software for grinding of spline shafts Software for testing of spline shafts BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization DLC lifetime monitoring for dressing tools Flexible profile correction for grinding operations Consumables Endless filter band Assembly/disassembly aid for filter band 100 Diamond dressing rollers CVD dressing roller D200 R1 for profile grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350 B60 for profile grinding Grinding wheel D350 B45 for profile grinding Profiled grinding wheel D350 B150 for generating grinding Distance rings/intermediate plates 4 intermediate plates B100 22 intermediate plates B60 30 intermediate plates B45 37 intermediate plates B30 Additional Components Grinding wheel flange without intermediate plate Set of standard probes / measuring probes Additional Options Warranty extension from 12 to 24 months Closed Loop 1.0 basic version Interface for external automation

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Psdowvbqiopfx Aalepl Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg Pedpjv Ic R Ajfx Aalspl PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: excellent (used), Year of construction: 2006, operating hours: 53,244 h, functionality: fully functional, Technical Data – Gleason Phoenix II 600HC (CNC Hypoid Gear Cutting Machine) Working Area Max. workpiece diameter: Ø 600 mm Max. tooth depth: 24.6 mm Max. gear width: 110 mm Number of teeth: 1–300 Cutterhead size face milling (FM): 18" diameter Cutterhead size hobbing (FH): 210 mm radius Max. cutter spindle speed: 600 min⁻¹ Psdpfoxwzu Ijx Aalepl Work Spindle Front taper diameter: Ø 203 mm Taper bore diameter: Ø 181 mm Bore depth: 884 mm Max. work spindle speed: 600 min⁻¹ Dimensions and Weight Footprint L × W × H: 4.4 × 3.5 × 3.5 m (incl. peripherals) Machine weight: 26,000 kg Connection Data Total connected load: 139 kVA Main fuse: 200 A Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. Psdjx Af A Hjpfx Aalspl The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment.

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm --> Straight gear teeth: --> Largest workpiece diameter: 630 mm Pjdpfsw A Am Sex Aaljpl --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm Pedpoxvr Ensfx Aalspl MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 32300-16, grinding wheel diameter: 400 mm, grinding wheel width: 104 mm, overall weight: 1,500 kg, TECHNICAL DETAILS Grinding wheel diameter: 400 mm Max. grinding wheel width: 104 mm Grinding worm diameter: 270 - 400 mm Max. grinding worm width: 62/84/104 mm Grinding worm speeds during profiling: 18/35/70 rpm Max. module: 7 Min. module: 0.5 Pressure angle: 10 - 30 degrees Longitudinal travel of dressing unit: 156 mm MACHINE DETAILS Pjdpfx Aoxvr A Tjaljpl Electrical data Total connected load: 3 kW Electrical specification - voltage/frequency: 380 V / 50 Hz Dimensions & Weight Space requirement approx.: 1.5 x 1.4 x 1.3 m Machine weight approx.: 1,500 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 73866, workpiece weight (max.): 60 kg, rotational speed (max.): 2,300 rpm, overall weight: 5,000 kg, TECHNICAL DETAILS Module, max.: 7 Grinding worm diameter: 280–350 mm Grinding worm width: 84–104 mm Grinding worm speed (grinding): 1,100–2,300 rpm Grinding worm speed (profiling): 50–95 rpm Number of teeth, min.: 6 Number of teeth, max.: 600 Maximum permissible outside diameter: 360 mm Maximum workpiece weight: 60 kg Maximum grinding stroke: 175 mm Workpiece speed (grinding): max. 250 rpm MACHINE DETAILS Machine weight approx.: 5 t Electrical Data Mains connection: 3 × 400 V 50 Hz Machine voltage: 3 × 400 V 50 Hz Control voltage: 1 × 230 V 50 Hz / 1 × 24 V DC Pedpfx Aajxvrzijlopl Contactor voltage: 1 × 24 V DC Solenoid valve voltage: 1 × 24 V DC

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 90 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 400 mm, spindle bore: 40 mm, TECHNICAL DETAILS Travel Distance X-Axis: 90 mm Travel Distance Y-Axis: 80 mm Travel Distance Z-Axis: 400 mm Maximum Permissible Head Circle Diameter: 140 mm Milling Arbor Diameter: 22 mm Maximum Gear Cutting Length: 160 mm Angles Maximum Swivel Angle of Milling Head +A Direction: 45° Maximum Swivel Angle of Milling Head -A Direction: 118° Podexvrarjpfx Aaljpl Workpiece Spindle Outer Diameter: 105 mm Bore: 40 mm Rapid Traverse X-Axis: 7,500 mm/min Y-Axis: 5,000 mm/min Z-Axis: 15,000 mm/min Rotational Speeds Tool: 50 to 4,000 rpm Workpiece Spindle max.: 3,000 rpm MACHINE DETAILS Operating Hours: 29,790 h Cycle Time: 6,654 h Electrical Connection Mains Connection: 400 V (AC) Supply Voltage: 400 V (AC) Control Voltage: 24 V (DC) Frequency: 50 Hz Connected Load: 13 kVA Cable Cross-Section: 16 mm² Fuse Rating: 63 A Dimensions & Weight Space Requirement: 5.25 x 4.06 x 2.94 m Machine Weight: 8 t EQUIPMENT Industrial Filter IFS EC1500 Sediment Separator Knoll KF200/640 Integrated Chip Conveyor with Magnetic Separator Machine Automation for Loading and Unloading Workpieces Robot Automation Güdel KTB-31/62, Year Built: 2018 with Station for Part Remover

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm Psdpfxevxwpuj Aalopl distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Own lapping system included Was also operated at a lapping center

Condition: used, Year of construction: 2008, ratio of transmission 10:1 Ppjdpfjvxwmtjx Aalol min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Ppsdpfx Asxz Eg Asaljl Technical data: Gear diameter: 300 mm Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Pjdpfxjxz Ef So Aalepl Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE).

Condition: ready for operation (used), functionality: fully functional, Used gear grinding machine Niles ZSTZ 630i. The machine is fully functional; a video can be provided upon request. Pedpfoxzfugex Aalopl

Condition: used, Year of construction: 1954, total height: 2,000 mm, total width: 1,600 mm, total length: 2,400 mm, Empty weight: 1.000 kg Price: On request Chuck: 700mm  Workpiece maximum height: 550mm  X axis displacement: 450mm Pjdpfxexbq U So Aaljpl - Year: 1954 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 1600mm x 2000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, max. wheel diameter 300 mm gear width 200 mm max. module 12 min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t Ppjdpfoxu Nttox Aaljl dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Ppodpfxoxupg To Aalsl See document

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Ppjdpfxjwftuxj Aalsl Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: excellent (used), Year of construction: 2007, Gleason Pfauter G130H CNC vertical gear hobbing machine Control, Siemens 840D Year of manufacture, 2007 Capacity Maximum workpiece diameter, about 130 millimetres Maximum gear width, about 170 to 180 millimetres Maximum module, up to module 3 or 4 depending on the configuration Minimum module, about module 0 point 5 Hob head Hob spindle power, about 11 point 5 to 14 kilowatt Hob speed range, about 10 to 4000 revolutions per minute Hob head swivel, about plus and minus forty five degrees Maximum hob diameter, about 100 millimetres Maximum hob length, about 240 to 317 millimetres Hob shift travel, about 170 to 220 millimetres Axis travels X axis travel, about 200 millimetres Y axis travel, about 170 millimetres Z axis axial slide travel, about 250 to 350 millimetres Work spindle and table Work spindle speed, about 0 to 1000 revolutions per minute Table diameter, about 160 to 168 millimetres Table bore, about 65 millimetres Maximum clamping length, about 245 millimetres Hydraulic clamping included in most units Process Wet cutting External gear hobbing Two cut cycles and taper or crown hobbing possible ISO thirty hob arbor Podpfxexxzqlo Aalspl Optional automatic loading systems Electrical and general Machine weight 11 tons Overall footprint, roughly three metres by three metres with guarding

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm Ppsdpevxwxcsfx Aalsl z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Podpfxexq Hgcj Aalepl Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t